1
1. Introduction
•Small, light-weight and compact
•IGBT output bridge for high speed switching and low power consumption
•Motor speed control - 8 preset speed values
•Logic inputs for remote control
•Preset drive parameters - factory drive adjustment under special customer conditions
•FRECON TELECONTROL: remote control and indication unit
•External RFI input filter
2. General characteristics
Type: FID-L: 18 37 55 75 110 150 220 250
Nominal motor rating (kW) 0,18 0,37 0,55 0,75 1,1 1,5 2,2 2,5
Input:
Voltage 1x 230V ±10%
Nominal motor rating (kW) 2,6 4,4 6,1 7,0 9,6 12,2 17,5 20,0
Frequency 47 ÷63 Hz
Output:
Voltage 3 x 0 ÷input voltage
Frequency 8 preset values
20,25,30,35,40,44,47,50Hz
acceleration/deceleration between
preset values - 5Hz/s
Apparent power (kVA) 0,6 1,0 1,4 1,6 2,2 2,8 4,0 4,5
Overload 150%, 30 sec
Nominal current (A) 1,4 2,4 3,0 4,0 5,5 7,0 10,0 11,3
Modulation PWM - 18kHz
V / f - characteristic square - law
Control:
logic inputs - control switches or PLC outputs
function - START/STOP, preset speeds selection: 8 values
Protections:
low voltage, overvoltage, overcurrent, I x t, short-circuit (phase-phase, phase-earth)
Enviromental conditions:
Ambient temperature 0 ÷400C
Ambient humidity max. 90% (non condensing)
Enclosure IP 00 or IP 20 or IP 54
Design criteria:
Safety EN 61 010-1/95
Electromagnetic compatibility-emission: EN 55 011/A1,B1; EN 50 081-1, 2 (with external RFI filter)
-immunity: EN 50 082-1, 2
Dimensions: Height (mm) 180 200
Width (mm) 153 160
Depth (mm) 97 145
Weight: (kg) 1,3 2,5
3. Description
heat sink control and power
cables lead-in
status LED indication
- power
- failure
