Freefly FRX Pro Bedienungsanleitung
FRX Pro
Overview
Introduction
FRX Pro was designed to increase the performance of Freefly's family of gimbal controllers
by allowing users to achieve increased range and better connections in even the harshest RF
environments. FRX Pro is perfect for professionals who are looking to push their Freefly gear
further to get shots that were previously unattainable.
This manual covers the setup, use, and troubleshooting information needed to successfully
use FRX Pro with your other Freefly gear. We advise reading and understanding this manual
before using FRX Pro with other products in the Freefly Ecosystem!
Throughout the manual, warnings, cautions and notes are used to highlight various
important procedures. These are defined as follows:
In the Box
FRX Pro Kit Contents
Item Quantity
FRX Pro Module 2
COM Cable 300mm 2
USB Cable (A-C) 1
D-Tap Power Cable (DTAP - Molex) 1
5dBi Antenna (RP-SMA) 2
2dBi Antenna (RP-SMA) 2
Zipties 200mm 2
Additional Optional Accessories
Item Use
25mm Pop-n-Lock Used to mount FRX Pro to MōVI Pro and MōVI Carbon
50mm Pop-n-Lock Used to mount FRX Pro to MōVI XL
Screw Mount Pop-n-Lock Used to mount FRX Pro to MōVI Controller and other
products with 1/4-20 mounts.
FRX Pro - Single Module* Replace or add an additional FRX Pro to your Freefly kit
FRX Pro Spare D-Tap Power
Cable* Replace the D-Tap Power Cable in the FRX Pro Kit
5dBi Spare Antenna Set* Replace the 5dBi antennas provided in the FRX Pro Kit
2dBi Spare Antenna Set* Replace the 2dBi antennas provided in the FRX Pro Kit
*Note: These items are not yet available in the Freefly store but will be added soon.
System Diagram
FRX Pro Overview
Item Function
1. Status LED Communicates FRX Pro status to the user
2. Bind Button Binds FRX Pro units to one another
3. UART Port Connects to FRX Pro to Freefly products with UART communication ports
4. CAN Port Connects to FRX Pro to Freefly products with CAN communication ports
5. USB-C Port Connects to FRX Pro to Freefly products with USB communication ports
Setup Overview
Status Light Overview
Connectors and Pinouts
Specifications
Dimensions + Mounting Patterns
Item Dimensions
Length 15.6mm
Height 67.0mm
Width 42.4mm
Mounting Pattern M3 - 15mm x 15mm Grid
Specifications
Item Specification
Weight 62.2g
Input Voltage 5 V - 30V
Inhaltsverzeichnis
Andere Freefly Controller Handbücher
