Freetech P5F111 Bedienungsanleitung

P5F111 User’s Manual 1

The information contained in the user’s manual and all accompa-

nying documentation is copyrighted and all rights are reserved.

This publication may not, in whole or in part, be reproduced,

transcribed, stored in a retrieval system, translated into any lan-

guage or computer language, or transmitted in any form whatso-

ever without the prior written consent from the manufacturer,

except for copies retained by the purchasers for their personal

archival purposes.

The manufacturer reserves the right to revise this user’s manual

and all accompanying documentation and to make changes in the

content without obligation to notify any person or organization of

the revision or change.

IN NO EVENT WILL THE VENDOR BE LIABLE FOR

DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSE-

QUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTA-

TION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT

HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE,

OR DATA STORED OR USED WITH THE PRODUCT,

INCLUDING THE COSTS OF REPAIRING, REPLACING, OR

RECOVERING SUCH HARDWARE, SOFTWARE, OR

DATA.

All trademarks mentioned in this document are acknowledged.

The Specification on the manual is subject to change without

notice.

2 P5F111 User’s Manual

Table Of Contents

Chapter 1

Introduction

1.1 Features

1.2 Specifications

1.3 What You Have

1.4 Precautions

1.5 Board Layout

1.5.1 Jumper Switches

1.5.2 Expansion Slots

1.5.3 Onboard Connectors

Chapter 2

Mainboard Installation

2.1 Installation Steps

2.2 Installing CPU

2.2.1 Setting the CPU Vcore Voltage

2.2.2 Setting the CPU I/O Voltage

2.2.3 Setting the CPU External Frequency

2.2.4 Setting the CPU to BUS Frequency Ratio

2.3 Installing Memory

2.4 Attaching Connectors

2.5 Set Jumpers on the Mainboard

P5F111 User’s Manual 3

Chapter 3

BIOS Configuration

3.1 Entering Setup

3.2 CMOS Setup Utility

3.3 Standard CMOS Setup

3.4 IDE HDD Auto Detection

3.5 Load Setup Defaults

3.6 Save & Exit Setup

3.7 Exit Without Saving

3.8 BIOS Features Setup

3.9 Chipset Features Setup

3.10 Power Management Setup

3.11 PnP/PCI Configuration

3.12 Integrated Peripherals

3.13 Supervisor/User Password

Chapter 4

Driver and Utility

4.1 Flash Utility

4.2 The steps to Install the VIA GRAT AGP Driver

4.3 The Steps to Install the VIA Bus Master PCI IDE Driver

4.4 The Steps to Install the VGA Driver

4.5 The Steps to Install the MVP4 Sound Card Driver

4.6 USB Driver

Appendix

System Environment Monitor

A.1 The Steps to Install the System Environment Monitor

Driver

4 P5F111 User’s Manual

1 Introduction

The P5F111 is a quality, high performance, function enhanced

mainboard based on the powerful Intel P54C/P55C, AMD K5/K6/K6-2/

K6-3, Cyrix 6x86/M II and IDE WinChip C6 family processor.

With a built-in VIA AGP graphics Chip, Ultra DMA-33/66 Bus

Mastering IDE controller, concurrent PCI bus, USB ports and built-in

AC97 Digital Audio Controller. It has 1MB or 2MB (optional) pipelined-

burst second-level cache on board and two Dual Inline Memory

Modules (DIMMs) allow as much as 512MB of 3V SDRAM/EDO

memory or 512MB of 3V EDO memory.

The board offers outstanding I/O capabilities, with Ultra DMA-33/66

Bus Mastering IDE interfaces, a floppy controller, two serial port

connectors, an EPP/ECP-capable parallel port connector, and IrDA-

compatible infrared port, two USB connectors, two USB ports, and

more. The three PCI local bus slots, two ISA bus slots, and one AMR

slot provide outstanding expandability for add-on peripheral cards.

In addition, the board features a synchronous switching regulator and

advanced power and system management functions. The board’s BIOS

supports automatic device detection--making setup of hard drives,

expansion cards, and other devices virtually automatic.

1.1 Features

This section presents an overview of the board’s special features.

VIA Apollo MVP4

The Apollo MVP4 is an advanced System Multimedia Architecture

(SMA) PC core logic chipset for Socket 7 PC systems. The VIA Apollo

MVP4 is a combination of the widely successful VIA Apollo MVP3

chipset and a high performance 2D/3D AGP graphics with setup engine

and DVD hardware acceleration (Tridert Blade 3D 9880). Paired with

the new VIA VT82C686A Super South bridge. The MVP4 is a

compelling solution for cost-effective, full-feature desktop and mobile

PC designs.

Chapter 1: Introduction

P5F111 User’s Manual 5

AGP VGA

Integrates an AGP 2.0 - Complaint 2D/3D AGP graphics controller into

the north bridge of the chipset, 64-bit 2D/3D graphics engine, and video

accelerator with advanced DVD video.

AC97 Audio

Integrated AC97 2.0 (meets PC 98(TM) Basic Audio Specification) and

Sound Blaster-compatible legacy audio.

ISA and PCI Expansion Slots

Provides two 16-bit ISA expansion slots and three 32-bit PCI expansion

slots.

Versatile Memory Configuration

The two DIMM sockets support up to 512MB of 3.3V SDRAM

memory. Synchronous Dynamic Random Access Memory (SDRAM)

provides optimized performance through increased data transfer rate.

Ultra DMA-33/66 Bus Mastering IDE Controller

Provides an Enhanced Intelligent Drive Electronics (IDE) hard disk

controller. Support for Ultra DMA-33/66 speeds up disk drive access.

Flash ROM BIOS and Enhanced ACPI

The programmable Flash ROM BIOS offers Advanced Configuration

and Power Interface (ACPI). ACPI enables ACPI-supported operating

systems (such as Windows 98) and applications to direct system power

management.

Synchronous Switching Regulator

The highly efficient synchronous switching design reduces power

consumption and heat generation.

External Modem Wakeup (Remote Ring On) (WOM)

With an optional phone line and modem, the board can turn on

automatically to answer a phone call.

Chapter 1: Introduction

6 P5F111 User’s Manual

Wake on LAN (WOL)

Provides a connector to an optional PCI LAN card (with remote

wakeup capabilities) so that a remote server can turn on the system

through a network.

RTC Walk-up Timer

The RTC wakeup timer can turn on your system at a predefined date and

time.

Dual-Function Power Button (Soft-Off Control)

Use the power button to turn off the system instantly or with “soft-off”

control. When soft-off is selected, pressing the power button will cause

the system to enter Sleep (Suspend) mode. With soft-off, the system

won’t turn off unless you continuously hold the power button for 4

seconds or longer. This prevents you from accidentally turning off the

system.

System Sleep (Suspend) Mode

To conserve energy, the system employs the following measures when

in Sleep (Suspend) mode:

The CPU stops running

The chipset and related circuits go to the lowest power state

The hard disk stops spinning

The monitor goes blank

The CPU cooling fan and system fan are turned off

The Power LED indicator on the front panel dims when the system

is in Suspend mode. (If you are using a 3-pin LED, it can display a

different color when the system is in Suspend mode).

Desktop Management Interface (DMI)

Supports DMI through the BIOS, which creates a higher level of

compatibility by allowing hardware to communicate with a standard

protocol.

Chapter 1: Introduction

P5F111 User’s Manual 7

Chapter 1: Introduction

Super Multi-I/O

Provides two high-speed UART-compatible serial ports and a parallel

port with EEP and ECP capabilities. For wireless connections, you can

connect an optional infrared module to the IrDA-compatible infrared

port.

Automatic Device Detection

Auto-detection support in BIOS makes installation of hard drives, and

other devices samples.

8 P5F111 User’s Manual

1.2 Specifications

Hardware

CPU Intel® P54C/P55C, AMD K5/K6/K6-2/K6-3, Cyrix

6x86/M II and IDE WinChip C6 Family

VRM Synchronous switching regulator; provides 1.3V to

3.5V operating voltage

Coprocessor CPU built-in floating point unit

Speed System bus clock 66/68/75/83/95/100/112MHz

PCI bus clock 27.7/31.75/33.3/34.25/37.5/37.75MHz

ISA bus clock 8.33MHz

Chipset VIA MVP4 (VT8501/VT82C686A)

EIDE Controller Dual-Channel Enhanced Intelligent Drive

Electronics (EIDE) interface supports up to 4

IDE hand disk drives or CD drives;

Supports PIO mode 0 through mode 4 drives;

Supports Bus Mastering DMA mode 2 drives and

Bus Mastering Ultra DMA-33/66 drives

Enhanced I/O Two serial ports (16550-compatible UART)

Parallel port with bidirectional lines supports

Standard Parallel Port (SPP), Enhanced

Parallel Port (EPP), and Extended

Capabilities Port (ECP)

IrDA-compatible infrared port

Mouse/Keyboard PS/2 mouse connector

PS/2 keyboard connector

Expansion Slots 3 X 32-bit PCI slots and 2 X 16-bit ISA slots

One AMR Slot

Chapter 1: Introduction

P5F111 User’s Manual 9

Power Management Compliant with EPA, APM 1.2 and ACPI

AT soft-off power control

ATX soft-off power control

Power - On by Keyboard & PS/2 mouse

Power - On by Modem Ring

Power - On by Alarm

Power - On by Network Card (WOL)

Sleep state indicator

Fan off in sleep mode

System Management VIA 686A include PC Health Monitor

Voltage Regulator Switching regulator

Form Factor AT Form Factor, 22.0cm x 24.0cm (7.25”x 7.9")

Software

BIOS AWARD AGP/PCI BIOS

2M-bit Flash BIOS with ESCD block

Supports APM, PnP, Multi-Boot, DMI and

EIDE devices

Supports Removable Media Drive

Driver Utility IDE Bus mastering Ultra DMA driver

Flash utility for BIOS upgrade

Hardware Doctor Utility

AGP VxD Driver

On Chip Trident AGP Driver

Audio drivers

O.S. Operates with MS_DOS 6.2x, Windows 3.x,

Windows 95, Windows 98, Windows NT4.x,

Window NT5x, OS/2 Warp 4.0, Novell

Netware, Novell UnixWare 1.1 and SCO Unix

5.0.x

Chapter 1: Introduction

10 P5F111 User’s Manual

Environment

Ambient Temperature 00C to 500C (Operating)

Relative Humidity 0 to 85% (Operating)

Vibration 0 to 500 Hz

DC Voltage 4.9V to 5.2V

DC Voltage 1.8 V to 3.50V

DC Voltage -5V, +12V, -12V, +5VSB 5% tolerance.

1.3 What You Have

The P5F111 mainboard comes securely packaged in a sturdy cardboard

shipping carton. In addition to this User’s Manual, the shipping carton

contains:

The mainboard

CD with support drivers and utilities OR Diskette with drivers and

utilities.

COM1, COM2, VGA, Sound, Printer, Floppy disk drive and IDE

ribbon cables

If any of these items is missing or damaged, contact the dealer from

whom you purchased the mainboard. Save the shipping materials

and carton in case you want to ship or store the board in the future.

Inside the carton, the mainboard is sandwiched between sheets of

sponge and packed in an anti-static bag. After you unpack the board,

inspect it for damage. Press down all the integrated circuits to make

sure they are properly seated in their sockets. Do not apply power to

the board if it appears to have been damaged.

Chapter 1: Introduction

Inhaltsverzeichnis

Andere Freetech Hauptplatine Handbücher

Freetech

Freetech 486F55 Bedienungsanleitung

Freetech

Freetech P8F154 Bedienungsanleitung

Freetech

Freetech P6F127 Bedienungsanleitung

Freetech

Freetech P6F70 Bedienungsanleitung

Freetech

Freetech 586F62 Bedienungsanleitung

Freetech

Freetech P5F97 Bedienungsanleitung

Freetech

Freetech P8F152 Bedienungsanleitung

Freetech

Freetech P8F153GVT-e Bedienungsanleitung

Freetech

Freetech P6F104 Bedienungsanleitung

Freetech

Freetech P8F153 Bedienungsanleitung

Freetech

Freetech 586F52 Bedienungsanleitung

Freetech

Freetech P5F76 Bedienungsanleitung

Freetech

Freetech P6F209 Bedienungsanleitung

Freetech

Freetech P8F162 Bedienungsanleitung

Freetech

Freetech P6F94 Bedienungsanleitung

Freetech

Freetech P6F135 Bedienungsanleitung

Freetech

Freetech FLEXUS P6F132 Bedienungsanleitung

Freetech

Freetech P6F77 Bedienungsanleitung

Freetech

Freetech P7F200A2 Bedienungsanleitung

Freetech

Freetech 486F55 Bedienungsanleitung

Freetech

Freetech P8F150 Bedienungsanleitung

Freetech

Freetech P8F137 Bedienungsanleitung

Freetech

Freetech P5F87 Bedienungsanleitung

Freetech

Freetech P6F163 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung