Frequency Central System X Filter Handbuch

Build documentation for:

System X filter

Based on the Roland System 100M VCF

Frequency central

Version 2 / April 2013

B100K B100K A100K B100K A100K A100K

Key to PCB screen print:

n: This signifies NPN BC547 transistors. Note the correct pinout as shown by the half circles.

p: This signifies PNP BC557 transistors. Note the correct pinout as shown by the half circles.

f: This signifies 2N5485 FETs. Note the correct pinout as shown by the half circles. D, S, G is

signified should you want to sub alternatives.

Gnd: Ground

Please observe the correct polarity of the 2 diodes and 12 electrolytic capacitors. The 10 x

22uF are configured in sets of 2 back to back (negative to negative).

The PCB shows the correct orientation for BC547/BC557/2N5485. Other transistor types can

be used (eg 2N3904/2N3906/BF245), but please observe the correct pinout.

Thermistor (next to 5K6 resistor)

I use a 10K NTC available from Tayda, seems perfect:

http://www.taydaelectronics.com/thermistors/10k-ohm-ntc-thermistor-5mm.html

…but, you can just use a 10K resistor if 100% temperature stability isn’t so important to you.

I can assure you, it’s pretty accurate anyway without the thermistor.

Trimmers

Offset - Trims the frequency up/down, should be just about fine in the mid position, but

adjust to taste.

V/oct –This filter can be set up to track V/oct fairly accurately over around 5 octaves.

1. Send 1V/oct keyboard into CV input 1 and turn it’s attenuator fully clockwise.

2. Play octaves, while adjusting the trimmer until you’re close.

3. Play 2 ocatves apart, adjust trimmer a little more…

Bill of materials

100R x 1

560R x 8

1K5 x 1

1K8 x 1

4K7 x 1

5K6 x 1

6K8 x 1

10K x 5

12K x 1

15K x 5

22K x 4

27K x 1

33K x 3

47K x 1

68K x 6

100K x 5

150K x 1

270K x 1

470K x 1

1M x 1

470pF x 4

22uF x 10

47uF x 2

10K Thermistor

LF351 x 2

LM13700 x 2

BC547 x 3

BC557 x 1

2N5485 x 4

1N4148 x 2

A100K x 3

B100K x 3

All pots are 16mm

Alpha.

10K trimmer x 1

100K trimmer x 1

All trimmers are

6mm (Tayda)

Underside of the PCB showing:

-Ground bus between sockets and PCB

-Connections between inputs/outputs and PCB

I use solid core for all of the above.

RDH 17th May 2013

http://www.frequencycentral.co.uk/

Inhaltsverzeichnis

Andere Frequency Central Steuereinheit Handbücher

Frequency Central

Frequency Central Raging Bull 2.0 Handbuch

Frequency Central

Frequency Central Seismograf Handbuch

Frequency Central

Frequency Central XVCO Handbuch

Frequency Central

Frequency Central Wave Runner Handbuch

Frequency Central

Frequency Central System X Filter 2 Handbuch

Frequency Central

Frequency Central State 700 Handbuch

Frequency Central

Frequency Central CEMvelope Handbuch

Frequency Central

Frequency Central Infinitely Maybe Handbuch

Frequency Central

Frequency Central Waverider Digital VCO Handbuch

Frequency Central

Frequency Central Raging Bull Handbuch

Frequency Central

Frequency Central Stasis Leak Bedienungsanleitung

Frequency Central

Frequency Central State 700 MK2 Handbuch

Frequency Central

Frequency Central Stasis Leak Handbuch

Frequency Central

Frequency Central MU System X Dual ADSR Handbuch

Frequency Central

Frequency Central Raging Bull 3.0 Handbuch

Frequency Central

Frequency Central System X CV Mixer Handbuch

Frequency Central

Frequency Central Cosmic Background Handbuch

Frequency Central

Frequency Central Whiteface Handbuch

Frequency Central

Frequency Central Deep Thought Handbuch

Frequency Central

Frequency Central Pocket Calculator Rev(2) Handbuch

Frequency Central

Frequency Central Meth Amp Rev.2 Handbuch

Frequency Central

Frequency Central Waverider VCDO MKii Handbuch

Frequency Central

Frequency Central System X Amplifier Handbuch

Frequency Central

Frequency Central More VCAs Handbuch

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung