Fri-Jado BS3i Bedienungsanleitung
fri-jado
euro products
Bakestar intelligent
Technische handleiding
Service Manual
NL
GB
1-1
2-1
fri-jado
euro products
GB/-i- 9123627/0515
KEEP THIS MANUAL FOR FUTURE REFERENCE!
© 1999 Fri-Jado BV, Etten-Leur, The Netherlands
For the duration and the conditions of the guarantee we suggest you contact your supplier. You are also
referred to our general sales and delivery conditions that are available on request.
All liability for loss or injury resulting from the failure to follow these instructions or due to a failure to take the
normal precautionary measures or due to carelessness in actions, operation, maintenance or repair work if
not specifically described in this manual is rejected by the manufacturer.
Because of our constant efforts to improve our product it can occur that the details of your unit may differ from
what is described in this manual. For this reason these instructions serve only as a general guide for the
installation, use, maintenance and repair of the unit mentioned in this manual.
This manual was prepared with all due care, but the manufacturer cannot assume responsibility for any
possible errors in this manual or the consequences thereof.
Users are permitted to copy this manual for their own use.
All rights are reserved and no part of this manual may be reproduced and/or publicised in any manner what so
ever.
fri-jado
euro products GB/ 2-1
Table of contents
Table of contents
1
2
5
3
4
6
7
8
9
10
11
12
13
14
Foreword
Installation oven
Placement of the oven
2.2 Installation of the oven
2.1
Placing and connecting the ovens
5.1 Placing and connecting the Memory Excellent 4
5.2 Placing and connecting the Memory Excellent 5
5.3 Placing and connecting the Memory Excellent 8
5.4 Placing and connecting the Memory Excellent 10
5.5 Placing and connecting the Memory Excellent 2x4
5.6 Placing and connecting the Memory Excellent 2x5
5.7 Placing and connecting the Memory Excellent 4+5
Technical data
Overall dimension view
Control panel
Parameters
7.1 Calling up the parameter menu
7.2 Exit the parameter menu
7.3 Setting of the date and time
Service menu
8.1 Calling up the service menu
8.2 I/O systems function check
8.3 I/O status
8.4 Description I/O Memory Excellent
8.5 Read-out analogous inputs
8.6 Analogous input calibration
System parameters
9.1 Description system parameters
Internal temperature
10.1 I/O registration
10.2 Resetting the data
10.3 Changing the start-up text
10.4 Summary of access codes
CPU board
11.1 Fuse board
11.2 Replacing CPU board
Malfunctions
13.1 Malfunction analysis
13.2 Fault codes
13.3 Other codes
Exploded views
14.1 Exploded view 01
14.2 Exploded view 02
14.3 Exploded view 03
14.4 Partslist
Installation diagrams and flowcharts
14.1 Installation diagram Memory Excellent 5
14.2 Flowchart Memory Excellent 3
14.3 Flowchart Memory Excellent 5
14.4 Flowchart Memory Excellent 8
14.5 Flowchart Memory Excellent 10
2-2
2-3
2-3
2-3
2-5
2-5
2-6
2-7
2-8
2-9
2-10
2-11
2-4
2-4
2-12
2-13
2-13
2-13
2-13
2-14
2-14
2-14
2-16
2-16
2-17
2-17
2-18
2-19
2-22
2-22
2-22
2-22
2-23
2-24
2-25
2-28
2-28
2-29
2-29
2-30
2-30
2-31
2-32
2-33
2-36
2-36
2-37
2-38
2-39
2-40
9123627/0515
fri-jado
euro products
GB/ 2-2
1 Foreword
This manual is intended for the adjustment, maintenance and repair of the Memory Excellent.
Maintenance and repair to the Memory Excellent may only be undertaken by an authorised Fri-Jado
supplier or service organisation. Failing to observe this stipulation may endanger the guarantee of
your valuable oven.
Foreword
Each page of this manual bears a serial
number. If you have any queries about this
manual, please quote this number as this will
ensure that the correct information is obtained.
9123627/0515
fri-jado
euro products GB/ 2-3
Installation of the oven
9123627/0515
2.1 Placement of the oven
The oven must be placed on a flat surface, e.g. a strong countertop or Fri-Jado euro oven base.
Make sure the oven is stable and cannot slide or fall.
2 Installation of the oven
Check the spaces at the top and bottom of the oven door. These
spaces should be the same height on both the left- and right-hand
sides. Any necessary adjustments can be made using the
adjustment knobs under the oven rests. If the rests are not properly
adjusted, one or more of the following problems may occur:
The door may jam. The door lock may not work properly.
The door lock could be damaged.
Leakage could occur along the rubber sealing. 700
Important
Make sure you leave sufficient space around the oven to easily remove or insert the baking
sheets.
If the base has (rotating) wheels, the floor on which it rests must be perfectly level. Any
moving of the base will result in an improperly-adjusted door.
2.2 Installation of the oven
The connecting cable for the oven must be equipped with an approved plug connection. If use is to be
made of a permanent connection, the connecting cable must be connected to a manual on/off switch
that is installed near the oven in a clearly visible manner.
The oven has a 5-core connecting cable. As a standard the cable is connected internally as
illustrated in figure 1.
For a 3-phase 230V~ circuit without neutral the oven must be connected according to figure 2.
Figure 1
Figure 2
1
1
L1
L1
L2
L2
L3
L3
N E
E
2
2
3
3
4
4
5
5
400V 3N~50...60Hz
230V 3~50...60Hz
Remove the plastic protecting layer from the oven and insert the baking sheets.
Now the oven is ready for use.
fri-jado
euro products
GB/ 2-4
Technical data
3 Technical data
9123627/0515
Power connection 400/230V 3N~50…60Hz
Type BS 3 i / p BS 5 i / p BS 8 i / p BS 10 i / p
Power 8000W 13000W 19100W 23300W
Fuses needed with power connection
400V 3N~50…60Hz ( 3 phases with zero) 3x 16A 3x 20A 3x 32 3x 35
Fuses needed with power connection
230V 3~50…60Hz (3 phases without zero) 3x 30A 3x 35A 3x 50A 3x 63A
Stekker af fabriek Ceeform 5polig 16A 32A 32A 63A
Netto weight 108 kg 136 kg 181 kg 212 kg
Bruto weight 125 kg 155 kg 203 kg 234 kg
Hight 650 mm 850 mm 1150 mm 1350 mm
Width 910 mm 910 mm 910 mm 910 mm
Depth 740 mm 740 mm 740 mm 740 mm
Description belonging to the labels on the drawings.
Label Description
1Power cable lengte 2mtr. (3mtr. bij 10 laags model) *
2Watersupply "G" ¾ inch slang lengte 1,2 mtr. *
3Water drain hose slang lengte 2 mtr. *
4Exhaust pipe oven Ø 60mm
5Exhaust pipe hood Ø 180
7Space between the oven and a wall
8Location for ceeform socket
9Location for aired tap "G" ¾ inch
10 Location for drain pipe (40mm PVC)
* lenght are measured from the point at the rear of the oven where the hoses and cable come out.
fri-jado
euro products GB/ 2-5
Placing
5 Placing and connecting the ovens
5.1 Placing and connecting the Bs3 i
9123627/0515
Placing
fri-jado
euro products
GB/ 2-6
5.2 Placing and connecting the Bs5 i
9123627/0515
fri-jado
euro products GB/ 2-7
5.3 Placing and connecting the Bs8 i
Placing
9123627/0515
fri-jado
euro products
GB/ 2-8
Placing
5.4 Placing and connecting the Bs10 i
9123627/0515
Andere Handbücher für BS3i
2
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Fri-Jado Ofen Handbücher
Fri-Jado
Fri-Jado TG50 H Bedienungsanleitung
Fri-Jado
Fri-Jado FJ 1000 Bedienungsanleitung
Fri-Jado
Fri-Jado BC 5-p Bedienungsanleitung
Fri-Jado
Fri-Jado Deli Multisserie with Grease Separator Bedienungsanleitung
Fri-Jado
Fri-Jado TG50 M Bedienungsanleitung
Fri-Jado
Fri-Jado TDR 5 M Bedienungsanleitung
Fri-Jado
Fri-Jado FJ 1000 Bedienungsanleitung
Fri-Jado
Fri-Jado STG5 Bedienungsanleitung
Fri-Jado
Fri-Jado TDR-AC Bedienungsanleitung
Fri-Jado
Fri-Jado TG50 M Bedienungsanleitung
Fri-Jado
Fri-Jado S Bedienungsanleitung
Fri-Jado
Fri-Jado TDR 8 p gas Bedienungsanleitung
Fri-Jado
Fri-Jado BC 5-p Bedienungsanleitung
Fri-Jado
Fri-Jado STG Bedienungsanleitung
Fri-Jado
Fri-Jado TDR5 M Bedienungsanleitung
Fri-Jado
Fri-Jado Bake Star intelligent series Bedienungsanleitung
Fri-Jado
Fri-Jado TDR 5 M Bedienungsanleitung
Fri-Jado
Fri-Jado STG5 P Bedienungsanleitung
Fri-Jado
Fri-Jado TDR 5 M Bedienungsanleitung
Fri-Jado
Fri-Jado TDR 7 AC Bedienungsanleitung
