Friedrich MRM36Y3J Bedienungsanleitung
MWM36Y3J
MRM36Y3J
0RGHOV
,QGRRU8QLW
2XWGRRU8QLW
11
This appliance is not intended for use by persons (including children) with reduced
physical,
sensory
or mental capabilities or lack of experience and knowledge, un-
less they have been given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety.
Children should be supervised to ensure they are away from the appliance.
Do not dispose this product as unsorted municipal waste. Collection of
such waste separately for special treatment is necessary.
Content
Operation Notices
Precautions............................................................................................................1
Parts name ............................................................................................................2
5HPRWHScreen Operation Guide
Buttons on remote controller .................................................................................3
Introduction for icons on display screen ................................................................3
Introduction for buttons on remote controller.........................................................4
Function introduction for combination buttons.......................................................
Operation guide.....................................................................................................
Replacement of batteries in remote controller.......................................................
Emergency operation ..........................................................................................
Maintenance
Clean and maintenance.......................................................................................
Malfunction
Malfunction analysis ............................................................................................1
Installation Notice
Installation dimension diagram............................................................................1
Tools for installation.............................................................................................1
Selection of installation location ..........................................................................1
Requirements for electric connection ..................................................................1
Installation
Installation of indoor unit......................................................................................
Installation of outdoor unit ...................................................................................2
Vacuum pumping.................................................................................................2
Leakage detection ...............................................................................................2
Check after installation ........................................................................................
Test and operation
Test operation......................................................................................................
Attachment
Pipe expanding method.......................................................................................3
1
Precautions
Warning
Ɣ 'RQRWFRQQHFWDLUFRQGLWLRQHUWRPXOWLSXUSRVHVRFNHW2WKHUZLVHLWPD\
FDXVH¿UHKD]DUG
Ɣ 'LVFRQQHFWSRZHUVXSSO\ZKHQFOHDQLQJDLUFRQGLWLRQHU2WKHUZLVHLWPD\
cause electric shock.
Ɣ 'RQRWVSUD\ZDWHURQLQGRRUXQLW,WPD\FDXVHHOHFWULFVKRFNRUPDOIXQFWLRQ
Ɣ 'RQRWVSLOORUVXEPHUJHUHPRWHFRQWUROOHULQOLTXLGVUHPRWHPD\
PDOIXQFWLRQRUQRORQJHURSHUDWH
Ɣ 'RQRWUHSDLUDLUFRQGLWLRQHUE\\RXUVHOI,WPD\FDXVHHOHFWULFVKRFNRU
damage. Please contact dealer when you need to repair air conditioner.
Ɣ 'RQRWEORFNDLURXWOHWRUDLULQOHW,WPD\FDXVHPDOIXQFWLRQ
Ɣ ,I\RXQHHGWRUHORFDWLRQRIDLUFRQGLWLRQHULVUHTXLUHGSOHDVHFRQWDFW
OLFHQVHGDXWKRUL]HVHUYLFHRUFRQWDFWGHDOHUIRUPRUHLQIRUPDWLRQ. Otherwise
personal injury ordamageFDQRFFXU.
Ɣ 'RQRWVWHSRQWRSSDQHORIRXWGRRUXQLWRUSXWKHDY\REMHFWV,WPD\FDXVH
damage or personal injury.
Ɣ 'RQRWH[WHQG¿QJHUVRUREMHFWVLQWRDLULQOHWRUDLURXWOHW,WPD\FDXVH
personal injury or damage.
Ɣ $LU&RQGLWLRQHUVKRXOGEHSURSHUO\JURXQGHG,QFRUUHFWJURXQGLQJPD\FDXVH
electricshock.
Ɣ 'RLQVWDOOWKHGLFRQQHFW,IQRWLWPD\FDXVHPDOIXQFWLRQ
Ɣ ,QVWDOODWLRQDQGPDLQWHQDQFHPXVWEHSHUIRUPHGE\TXDOL¿HGSURIHVVLRQDOV
Otherwise, it may cause personal injury or damage.
Working temperature range
NOTICE:
Indoor side DB/WB(ć/°F) Outdoor side DB/WB(ć/°F)
Maximum cooling 27/19(80.6/66.2) 46/24(114.8/75.2)
Maximum heating 27/-(80.6/-) 24/18(75.2/64.4)
ƔThe operating temperature range (outdoor temperature) for cooling only unit is
-15ć~ 46ć(5 ~ 114.8°F) ; for heat pump unit is -20ć~ 46ć(-4 ~ 114.8°F).
2
Parts name
Indoor Unit
Outdoor Unit
air inlet panel
display
¿OWHU
horizontal louver
air outlet
aux.button
heating indicator
temp. indicator
cooling indicator
power indicator
receiver window
aux.button
drying indicator
display
remote control
air inlet
handle
handle
air outlet
Notice:
Actual product may be different from above graphics, please refer to actual
products.
MODE
(AUTO/COOL/DRY/FAN/HEAT).
setting.
: Press to decrease temperature
setting.
FAN
Press it set swing angle.
TIMER ON
CLOCK
TEMP
TIMER OFF
Press to set auto-off timer
TURBO
SLEEP
LIGHT
Press it to set auto-on timer.
Press WR set clock.
1
6
7
5
3
2
4
11
10
14
9
12
13
15
Operation of Remote Controller
3
9
10
13
12
5
4
11
8
7
21
6
8
Press to turn on/off the light.
Press to start or stop operation.
: Press to increase temperature
Press to set fan speed.
Press to select operation mode
SENSOR
AIR SWEEP
EXTEND
AUTO
15
14
START / STOP
DIGITAL display:
This area will show the set tempe-
rature.
LOCK icon:
is displayed by pressing "+"
and “-” buttons simultaneously. Press
them again to clear the display.
LIGHT icon:
is displayed by pressing the
LIGHT button. Press LIGHT button
again to clear the display.
22
MODE icon:
If MODE button is pressed,
current operation mode icon
(AUTO), ( COOL),
(DRY), (FAN) or (HEAT
only for heat pump models) will show.
18
is displayed when pressing
display.
After pressing TIMER button, ON or
OFF will blink.This area will show
the set time.
SET TIME display:
Pressing TEMP button,
(set temperature),
ambient temperature)
(outdoor ambient temperature)
and blank is displayed circularly.
(indoor
TEMP icon:
SLEEP icon :
is displayed by pressing
the SLEEP button. Press this
button again to clear the display.
19
is displayed when pressing the
nottubsihtsserP.nottubOBRUT
again to clear the display.
TURBO icon:
Operation of Remote Controller
icon:
AIR SWEEP
16
17
21
20
23
24
16
1
718 19 20 21
22
23
24
the button.
AIR SWEEP
Press this button again to clear the
27 26
25
is displayed when pressing the
again to clear the display.
Press FAN button to select the
desired fan speed setting (AUTO-
Low-Med-High).Your selection will
be displayed in the LCD windows,
except the AUTO fan speed.
FAN SPEED display:
is displayed when pressing the
to clear the display.
Operation of Remote Controller
icon:
SENSOR
icon:
EXTEND
EXTEND
button. Press this button
26
25 27
16
1
718 19 20 21
22
23
24
27 26
25
SENSOR
button. Press this button
again
Pressing CLOCK button, blinks. Within 5 seconds, pressing + or - button adjusts the
CLOCK :
present time. Holding down either button above 2 seconds increases or decreases the
time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During
blinking after setting, press CLOCK button again to confirm the setting, and then
will be constantly displayed.
7
Remote Controller Description
:
This button is used for setting Fan Speed in the sequence that goes from AUTO,
to then back to Auto.
,,,
FAN :
6
MODE :
5
Each time you press this button, a mode is selected in a sequence that goes from AUTO,
COOL,DRY, FAN,and HEAT *, as the following:
AUTO COOL DRY FAN HEAT *
*Note: Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not
be displayed on the LCD, and the unit will automatically select the suitable operation
mode in accordance with the room temperature to make indoor room comfortable.
1
3
2
4
Press this button to turn on the unit .Press this button again to turn off the unit.
Press this button to decrease set temperature. Hold it down for 2 secondsRUPRUH
to rapidly decrease set temperature. In AUTO mode, set temperature is not
adjustable.
Press this button to increase set temperature. Hold it down for 2 secondsRUPRUH
to rapidly increase set temperature. In AUTO mode, set temperature is not
adjustable.
Aut o
Low speed Medium speed High speed
Remote Control Instructions
6(16256$9(
3UHVVWKLVEXWWRQWRWXUQRQ6(16256$9(IXQFWLRQ6DYHVURRPDPELHQWWHPSHUDWXUH
DQGDXWRPDWLFDOO\DGMXVWVPDLQWDLQLQJWKDWURRPDPELHQWXQWLOSUHVVHGDJDLQZKLFK
FDQFHOVWKH6(16256$9(IXQFWLRQ
START / STOP:
AUTO
13
TEMP:
ambient temperature, 5s later or within 5s, it receives other remote control signal that will
return to display the setting temperature. if the users haven't set up the temperature
displaying status,that will display the setting temperature.(This function is not applicable
for some models).
TIMER ON :
TIMER OFF :
11
10
TURBO:
12
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply
press this button again.
After pressing this button, disappears and "ON "blinks. 00:00 is displayed for ON time
setting. Within 5 seconds, press + or - button to adjust the time value. Every press of either
button changes the time setting by 1 minute. Holding down either button rapidly changes the
time setting by 1 minute and then 10 minutes. Within 5 seconds after setting, press TIMER
ON button to confirm.
Press this button to set up & down swing angle, which circularly changes as below:
OFF
This remote controller is universal. If any command , or is sent out,
the unit will carry out the command as
indicates the guide louver swings as:
fan will continue operation for 10 min utes in order to dry the indoor unit even though you
have turned off the unit.
HEAT mode.
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in the shortest time. In COOL mode, the unit will blow strong
cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air
at super high fan speed. (This function is not applicable for some models).
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply
press the button again.TIMER OFF setting is the same as TIMER ON.
9
8
$,56:((3:
(;7(1''5<:
Pressing button in COOL or DRY mode, the icon is displayed and the indoor
After energization, OFF is defaulted. is not available in AUTO,FAN or
EXTEND
EXTEND EXTEND
Remote Control Instructions
the indoor setting temperature or indoor ambient
By pressing this button you can display
temperature.When the indoor unit it will display the setting temperature,
is first powered on
if the temperature's display status is changed from other status to" ",displays the
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere Friedrich Klimaanlage Handbücher
Friedrich
Friedrich M21DYF Kurzanleitung zur Einrichtung
Friedrich
Friedrich KCS12 Bedienungsanleitung
Friedrich
Friedrich WALLMASTER WS12 Bedienungsanleitung
Friedrich
Friedrich MR09Y3H Bedienungsanleitung
Friedrich
Friedrich MWM09Y1J Bedienungsanleitung
Friedrich
Friedrich MD24Y3J Bedienungsanleitung
Friedrich
Friedrich Kuhl KCL36 Bedienungsanleitung
Friedrich
Friedrich C24YF Bedienungsanleitung
Friedrich
Friedrich Wallmaster WET10A33A Leitfaden
Friedrich
Friedrich CP15F10 Bauanleitung
Friedrich
Friedrich Floating Air Pro-Premiere FPHW091 Bedienungsanleitung
Friedrich
Friedrich MS24Y3F Bedienungsanleitung
Friedrich
Friedrich Vert-I-Pak A-Series Bedienungsanleitung
Friedrich
Friedrich WallMaster WCT08 Bedienungsanleitung
Friedrich
Friedrich SH15 Bedienungsanleitung
Friedrich
Friedrich HEAT PUMPS Betriebsanleitung
Friedrich
Friedrich 9315342973 Bedienungsanleitung
Friedrich
Friedrich P09B-A Bedienungsanleitung
Friedrich
Friedrich M30CF Bedienungsanleitung
Friedrich
Friedrich P/N9359944072-01 Bedienungsanleitung
