Frigidaire FRT21HS6AW3 Bedienungsanleitung

P/N 240400108 (0212)

Welcome & Congratulations

Congratulationsonyourpurchaseofanewrefrigerator!We

here at Electrolux Home Products, Inc. are very proud of

our product and we are completly committed to providing

you with the best service possible. Your satisfaction is our

#1priority.

PleasereadthisUse&CareManualverycarefully.Itcontains

valuable information on how to properly maintain your new

refrigerator.

We know you’ll enjoy your new refrigerator and ThankYou

forchoosing ourproduct.Wehopeyouconsiderus forfuture

purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual provides specific operating

instructions for your model. Use your refrigerator only as

instructed in this manual. These instructions are not meant

to cover every possible condition and situation that may

occur. Common sense and cautionmust be practiced when

installing,operatingandmaintaininganyappliance.

Please record your model and serial numbers below for

futurereference. Thisinformation is foundon yourserial

plate located inside the refrigerator compartment.

NOTE: Useonly soap and water toclean serialplate.

ModelNumber:

SerialNumber:

PurchaseDate:

Questions?

1-800-944-9044

(UnitedStates)

1-866-213-9397

(Canada)

Please complete and mail in the Product

Registration Card included with your

refrigerator.

Please attach sales receipt

hereforfuturereference.

ExtendYourWarranty Protection

With An

Extended Service Contract

CALL 1-800-944-9044

To Enjoy These Benefits:

• Total freedom from repair bills so

unexpected repairs won’t upset your

budget.

• Fast, convenient toll-free service is just

a phone call away.

• Top-quality repairs by factory-trained

experts.

• Quick access to genuine replacement

parts so you can rest assured your

refrigerator is repaired with the proper

components.

Important Safety Instructions

WARNING: Please ReadAll Instructions Before Using This Refrigerator.

FOR YOUR SAFETY

• Donotstoreorusegasoline,orotherflammableliquids

in the vicinity of this or any other appliance. Read pro-

ductlabelsforwarningsregardingflammabilityand other

hazards.

• Donotoperate the refrigerator in the presense of

explosive fumes.

• Avoid contact with any moving parts of automatic ice

maker.

• Remove all stables from the carton. Staples can cause

severe cuts, and also destroy finishes if they come in

contactwithother appliances or furniture.

CHILD SAFETY

Destroyorrecyclethecarton,plasticbags,andanyexterior

wrapping material immediately after the refrigerator is

unpacked.ChildrenshouldNEVER usetheseitemstoplay.

Cartons covered with rugs, bedspreads, plastic sheets or

stretchwrap maybecomeairtight chambers,andcan quickly

causesuffocation.

These Guidelines Must Be Followed To Ensure That Safety Mechanisms In This Refrigerator

Will Operate Properly.

PROPER DISPOSAL OF YOUR REFRIGERATOR

OR FREEZER

Risk of child entrapment

Child entrapment and

suffocation are not problems of

thepast.Junked or abondoned

refrigeratorsorfreezersarestill

dangerous – even if they will sit

for “just a few days.” If you are

gettingridofyouroldrefrigerator

or freezer, please follow the

instructions below to help

preventaccidents.

Before you throw away your old refrigerator/ freezer:

• Removedoors.

• Leaveshelvesinplacesochildrenmaynoteasilyclimb

inside.

• Haverefrigerantremovedby a qualified service

technician.

ELECTRICAL INFORMATION

•The refrigerator must be plugged into its own

dedicated 115 Volt, 60 Hz.,AC only electric outlet.

The power cord of the appliance is equipped with a

three-pronggroundingplug for your protection against

electrical shock hazards. It must be plugged directly

intoa properly groundedthree-prongreceptacle.The

receptacle must be installed in accordance with local

codesandordinances.Consultaqualifiedelectrician.

Do not use an extension cord or adapter plug.

• Ifthepowercordisdamaged,itshouldbereplacedbythe

manufacturer, servicetechnicianora qualifiedpersonto

prevent any risk.

• Neverunplugtherefrigeratorbypullingonthepower

cord.Always grip the plug firmly, and pull straight out

fromthereceptacletopreventdamagingthepowercord.

• Unplugtherefrigerator before cleaning andbefore

replacing a light bulb to avoid electrical shock.

• Performance may be affected if the voltage varies by

10%ormore.Operating the refrigerator with insufficient

powercandamagethecompressor. Such damage is

notcoveredunderyourwarranty.

• Do not plug the unit into an outlet controlled by a wall

switchorpullcordtopreventtherefrigeratorfrombeing

turned off accidentally.

• AvoidconnectingrefrigeratortoaGroundFaultInterruptor

(GFI)circuit.

IMPORTANT: Turning the Freezer and Fresh Food

Controlsto“0”turnsoffthe compressor and prevents

yourrefrigerator fromcooling,butdoes notdisconnect

the power to the light bulb and other electrical

components.Toturnoffpowertoyourrefrigerator you

must unplug the power cord from the wall outlet.

This Use & Care Manual provides specific operating

instructions for your model. Use the refrigerator only as

instructed in this Use & Care Manual. Before starting the

refrigerator, follow these important first steps.

LOCATION

• Chooseaplace that is near agroundedelectricaloutlet.

Do Not use an extension cord or an adapter plug.

• If possible, place the refrigerator out of direct sunlight

andawayfromtherange, dishwasher or other heat

sources.

• Therefrigeratormust be installed on a floorthat is level

andstrongenoughto support a fully loaded refrigerator.

• Considerwatersupplyavailabilityformodelsequipped

with an automatic ice maker.

INSTALLATION

Do Not install the refrigerator where

thetemperaturewilldropbelow55°F(13°C)orriseabove

110°F(43°C).Thecompressorwillnotbeabletomaintain

propertemperaturesinside the refrigerator.

Do Not block the toe grille on the

lower front of your refrigerator. Sufficient air

circulation is essential for the proper operation of

yourrefrigerator.

InstallationClearances

• Allow the following clearances for ease of installation,

properaircirculation,andplumbingandelectrical

connections:

Sides&Top --------------- 3/8”

Back------------------------ 1”

NOTE: Ifyousee black coils/tubing on the backof your

refrigerator(air-cooled condenser) leave3”clearanceat

topofrefrigerator.

DOOR OPENING

NOTE: If your refrigerator is placed with the door hinge

side against a wall, you may have to allow additional

spaceso the door can be openedwider.

Your refrigeratorshould be positioned toallow easy access

toacounter when removing food.Tomakethis possible, the

directionin which thedoorsopen can bereversed.SeeDoor

Removal&Reversal Instructions onpage6.

Installation

LEVELING

All four corners of your refrigerator must rest firmly on a

solidfloor.Yourrefrigerator is equipped with adjustablefront

rollers to help level your unit.

To LevelYour Refrigerator:

1. Removetoegrille.

2. Useflat-bladescrewdriveror3/8”socketwrench

to adjust front rollers.

NOTE: Raisethefrontoftherefrigerator enough so the

doorsclosefreelywhen openedhalfway.Therefrigerator

shouldslope¼”to½”from front-to-back.Thenlevelthe

refrigeratorfrom side to side.

Installation - Connecting Optional Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the

refrigerator from electrical power before connecting a water supply line to the refrigerator.

ToAvoid Property Damage:

•Copper tubing is recommended for the water supply line. Water supply tubing made of ¼” plastic is not

recommendedsince it greatly increasesthe potential forwater leaks. Manufacturer willnot be responsiblefor

any damage if plastic tubing is used for supply line.

• DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft

water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

NOTE: Waterlinekitnumber 5303917950, availablefromyourappliance dealer atadditionalcost,contains25 feet (7.6

meters)of¼inch ODcoppertubing,asaddletypeshutoffvalve(nonpiercing),(2)¼inchbrasscompressionnuts,(2)

ferrules/sleeves, and instructions for installing a water supply line.

Before Installing The Water Supply Line,You Will Need

•Basic Tools: adjustablewrench, flat-blade screwdriver,andPhillipsTM screwdriver

• Access to a household cold water line with water pressure between 20 and 120 psi.

• Awater supply line made of ¼ inch (6.4 mm) OD, copper tubing.To determine the length of copper tubing needed,

you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water

pipe.Then add approximately 7 feet(2.1 meters), so therefrigerator can bemoved out for cleaning(as shown).

• Ashutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type

shutoff valve.

• A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may

causeice maker tocycletwoor three timesbeforemakinga full trayofice.New plumbing maycauseiceto bediscolored

or have poorflavor. Discard icemade during the first24 hours.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnectrefrigeratorfromelectricpowersource.

2. Place end of water supply line into sink or bucket. Turn ON water supply

and flush supply line until water is clear. Turn OFF water supply at shut

off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,

asshown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch).

Slide ferrule (sleeve) into valve inlet and finger tighten compression nut

ontovalve.Tightenanother half turn with a wrench;DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of

refrigeratorasshown.

7. Coilexcesswatersupply line (about 2½ turns) behind refrigeratoras shown

and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that

leak.

9. Reconnectrefrigeratortoelectricalpowersource.

10. Toturn ice makeron, lower wire signalarm (see icemaker front cover forON/

OFF position of arm).

Door Removal and Reversal Instructions

NOTE: Ifyouhave stainless steel doors --gototheRemoving Stainless

Steel Doorsand Handles Sectiononpage9.

NOTE:The direction inwhichyourrefrigeratordoorsopen(doorswing)

can be reversed, from left to right or right to left, by moving the door

hinges from one side to the other. Reversing the door swing should be

performedbyaqualifiedperson.

IMPORTANT: Before youbegin,turn therefrigeratortemperaturecontrol

to“0”and remove theelectricalpowercord from the walloutlet.Remove

any food from door shelves.

1. Removetoegrille and top hinge cover.

2. Remove top hinge with 3/8” hex driver and lift freezer door off of

centerhingepin. Set door aside.

3. Unscrewcenterhingepin using adjustable wrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and

loosening two outside screws enough to allow hinge and shim to

slideout.Tightenscrews.

6. Loosentwooutsidescrews on opposite side of refrigerator,remove

insidescrewand install center hinge.

7. Removebottomhingewith3/8” hexdriver.Reinsert twooutsidescrews

inholes and tighten. Inside screw will go to opposite side in step 8.

8. Removetwooutside screwsonoppositesideof refrigerator andinstall

bottom hinge. Insert and tighten screw saved from step 7.

9. Unscrewbottomhingepinusingadjustablewrench.Movehinge pin

toother hole in hinge and tighten withadjustable wrench.

10. Reverse doorhandles (see instructions on nextpage).

11. Move freezerand refrigerator door stops toopposite side. Before

starting screws, use an awl to puncture the foam.

12. Positionrefrigeratordoorontobottomhingepinandscrewcenter

hingepinthrough center hinge into top ofdoor.Closerefrigeratordoor

tohelp align hinge hole.

13. Tightencenterhingepinwithadjustablewrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lowerfreezerdoorontocenterhingepin.

16. Close freezer door. Have an assistant lift up on opposite side of door

while tightening screws to install top hinge.

17. Replace toegrille and top hingecover.

18. Pluginelectricalpowercordandturnrefrigeratortemperaturecontrol

to center position.Adjust setting as necessary.

DOOR REMOVAL AND REVERSAL INSTRUCTIONS:

Door Removal and Reversal Instructions (continued)

NOTE: Somemodelshave“pocket”handles,whicharerecessedintothesidesofthedoor. On these models, only the

hingeswill need to bereversed.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwoscrewsattachinghandle to bottom of freezer door.

2. Remove short trim piece by sliding trim straight up and off of handle

bracket.

3. Remove screw attaching top of handle to door.

4. MagneticNameplate Models:Gently prymagneticnameplate framefrom

door. Remove nameplate from its frame, turn frame upsidedown and

install in old handle holes. Insert magnetic nameplate into frame.

Self-Adhesive Nameplate Models: Gentlypeel off nameplate from door

andreapplyoveroldhandleholes.

TO ATTACH FREEZER HANDLE:

1. Reinstall handle on opposite side, using same hole as nameplate.

2. Attach handle to bottom of door.

3. Slide trim piece straight down onto handle bracket.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwoscrewsattachinghandle to bottom of freezer door.

2. Swing bottom of handle away from the door and slide handle straight up

and off of dovetail button.

3. Remove screw and dovetail button and install on other side, using the

same holes as nameplate.

4. Magnetic Nameplate Models: Use putty knife to gently pry magnetic

nameplateframefromdoor. Remove nameplate from its frame, turn frame

upside down and install in old handle holes. Insert magnetic nameplate

intoframe.

Self-AdhesiveNameplate Models: Useputtyknifeto gentlypeeloffname

platefromdoorand reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door. Place top of handle over dovetail

button,swing handle into an uprightposition and pulldownward, locking it

into place.

2. Securebottomofhandle with two screws removed earlier.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwoscrewsattachinghandle to bottom of freezer door.

2. Remove button plug using edge of putty knife.

3. Removescrewonsideof freezer door and remove handle.

TO ATTACH FREEZER HANDLE:

1. Secure side of handle to door and replace button plug.

2. Securehandleto bottom of door.

NOTE:To remove freezer handle, refer to figure 3on page 9.

Door Removal and Reversal Instructions (continued)

TRIM REMOVAL(FULL-LENGTH TRIM MODELS ONLY)

In some models, the refrigerator door has a full length trim piece which

continuesfromthebottomofthe handle to the bottom of the door.The top

ofthetrimattaches to the handle bracket (Figure 1) orfitsaroundthebase

ofthe handle(Figure2). Anadhesive“trim lock”ispositionedabouthalfway

down.Thebottomof the trimisheldin place byeitheranadhesive trim lock,

or a trim lock with two prongs inserted into a hole on the face of the door.

TO REMOVE TRIM:

1. Remove trim by gently pulling trim lock areas out and away from door.

2. When trim is free from door, slide the trim straight down and away

from base of handle.

NOTE:Formodelswithshorthandletrim,removebyslidingtrimstraight

down and off of handle bracket.

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

Figure 1 Style Handles

1. Removetwoscrewsattachinghandleto top of refrigerator door.

2. Removescrewattaching bottom of handleto door.

3. Remove two hole plugs and hinge pin plug on top of door and install

on opposite side. Use Phillips head screwdriver to remove plastic

screw plug from front of door and install on opposite side

Figure 2 Style Handles

1. Removetwoscrewsattachinghandle to top of refrigerator door.

2. Swingtopof handle away from doorand slidehandle downand off of

dovetailbutton.

3. Remove screw and dovetail button and install on other side, moving

holeplugsfrom corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

Figure 1 Style Handles

1. Securebottomof handle with screws.

2. Secure top of handle with screws.

Figure 2 Style Handles

1. Start with handle offset away from door. Place bottom of handle over

dovetailbutton,swinghandle into an upright position and pull upward,

locking it into place.

2. Secure top of handle with screws.

TO ATTACH TRIM:

1. Slide both trim locks out of trim.

2. Insert new adhesive trim locks contained in your literature pack.

NOTE: Trim lock must be removed and installed by sliding over the

twodonutshapedareas.

3. Install trim to handle by sliding under base of handle. Carefully align

trimand press down at trim lock locations.

4. Use rubbing alcohol to remove any adhesive residue from old trim

lock locations.

Figure 1

Figure 2

Door Removal and Reversal Instructions (continued)

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwoscrewsattachinghandleto top of refrigerator door.

2. Remove button plug using edge of putty knife.

3. Removescrewonsideofrefrigeratordoorandremove handle.

4. Reversefreezerandrefrigeratorhandlesas shown in figure 3.

TO ATTACH REFRIGERATOR HANDLE:

1. Secure side of handle to door and replace plug button.

2. Secure handle to top of door.

REMOVING STAINLESS STEEL DOORS AND HANDLES

Use care when using tools near surface of stainless steel doors to avoid scratching.

To Remove Doors

Stainlesssteeldoorsarenot reversible. Follow these steps to remove doors.

1. Removetoegrille and top hinge cover.

2. Remove top hinge and lift freezer door off of center hinge pin. Set door

aside.

3. Unscrewcenterhingepin using adjustable wrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Removecenterhingeandshim by removing inside screw and loosening

two outside screws enough to allow hinge to slide out.

6. Remove bottom hinge. Reinserttwooutsidescrewsinholesandtighten.

7. Reverse steps 1 - 6 to reinstall doors

To Remove Handles

1. Firmlyholdfreezerhandlewhile loosening set screws with 3/32” allen

wrench.Remove freezer handle.

2. Repeatstep1forrefrigeratordoor.

Figure 3 - Handle Reversal

Refrigerator Door Without Trim

Typical Handle

Features At A Glance

Features may vary according to model

Inhaltsverzeichnis

Andere Frigidaire Kühlschrank Handbücher

Frigidaire

Frigidaire FFHS2311LB Betriebsanleitung

Frigidaire

Frigidaire FRS6LE4F Bedienungsanleitung

Frigidaire

Frigidaire FRT21B4J Bedienungsanleitung

Frigidaire

Frigidaire MRS20WRGW Bedienungsanleitung

Frigidaire

Frigidaire FRS6R5EM Bedienungsanleitung

Frigidaire

Frigidaire FRT21G3C Bedienungsanleitung

Frigidaire

Frigidaire FRS6R3J Bedienungsanleitung

Frigidaire

Frigidaire FRT21KG4E Bedienungsanleitung

Frigidaire

Frigidaire FRT8WR6EZ9 Bedienungsanleitung

Frigidaire

Frigidaire FRC331GM Bedienungsanleitung

Frigidaire

Frigidaire FRT18IL6D Bedienungsanleitung

Frigidaire

Frigidaire FRT22QRG Bedienungsanleitung

Frigidaire

Frigidaire FRT13CRH Bedienungsanleitung

Frigidaire

Frigidaire FRT21NGJ Bedienungsanleitung

Frigidaire

Frigidaire FRT17B3A Bedienungsanleitung

Frigidaire

Frigidaire FGHC2399K Bedienungsanleitung

Frigidaire

Frigidaire PLHS68EES Bedienungsanleitung

Frigidaire

Frigidaire FRT21LRG Bedienungsanleitung

Frigidaire

Frigidaire FRT21G3H Bedienungsanleitung

Frigidaire

Frigidaire PHS69EJSS - 26.0 cu. Ft. Refrigerator Benutzerhandbuch

Frigidaire

Frigidaire FRS26W2A Bedienungsanleitung

Frigidaire

Frigidaire FRT21NNG Bedienungsanleitung

Frigidaire

Frigidaire FRT185BS Bedienungsanleitung

Frigidaire

Frigidaire FRT18G6JW - 18.2 cu. Ft. Top-Freezer... Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung