Frigidaire FRT21S6AW2 Bedienungsanleitung

P/N 240400104 (0107)

Welcome & Congratulations

Congratulationsonyourpurchaseofanewrefrigerator!We

here at Electrolux Home Products are very proud of our

product and we are completly committed to providing you

with the best service possible. Your satisfaction is our #1

priority.

PleasereadthisUse&CareManualverycarefully.Itcontains

valuable information on how to properly maintain your new

refrigerator.

Weknowyou’ll enjoy your new refrigerator andThankYou

forchoosingour product.Wehopeyou considerusforfuture

purchases.

PLEASE READ AND SAVE THESE INSTRUCTIONS

This Use & Care Manual provides specific operating

instructions for your model. Use your refrigerator only as

instructed in this manual. These instructions are not meant

to cover every possible condition and situation that may

occur.Commonsenseandcautionmustbepracticedwhen

installing,operatingandmaintaininganyappliance.

Please record your model and serial numbers below for

futurereference. This informationis foundon your serial

plate located inside the refrigerator compartment.

NOTE: Use only soap and water to clean serial plate.

ModelNumber:

SerialNumber:

PurchaseDate:

Questions?

1-800-944-9044

(UnitedStates)

1-866-213-9397

(Canada)

Please complete and mail in the Product

Registration Card included with your

refrigerator.

Please attach sales receipt

hereforfuturereference.

ExtendYour WarrantyProtection

With An

Extended Service Contract

CALL 1-800-944-9044

To Enjoy These Benefits:

• Total freedom from repair bills so

unexpected repairs won’t upset your

budget.

• Fast, convenient toll-free service is just

a phone call away.

• Top-quality repairs by factory-trained

experts.

• Quick access to genuine replacement

parts so you can rest assured your

refrigerator is repaired with the proper

components.

Important Safety Instructions

WARNING: Please Read All Instructions Before Using This Refrigerator.

FOR YOUR SAFETY

•Donotstoreorusegasoline,orotherflammableliquids

in the vicinity of this or any other appliance. Read pro-

ductlabels forwarningsregarding flammabilityandother

hazards.

•Donotoperate the refrigerator in the presense of

explosive fumes.

•Avoid contact with any moving parts of automatic ice

maker.

•Remove all stables from the carton. Staples can cause

severe cuts, and also destroy finishes if they come in

contactwithother appliances or furniture.

CHILD SAFETY

Destroyorrecyclethecarton,plasticbags,andanyexterior

wrapping material immediately after the refrigerator is

unpacked.ChildrenshouldNEVER use these items toplay.

Cartons covered with rugs, bedspreads, plastic sheets or

stretchwrap maybecomeairtightchambers, andcanquickly

causesuffocation.

These Guidelines Must Be Followed To Ensure That Safety Mechanisms In This Refrigerator

Will Operate Properly.

PROPER DISPOSAL OF YOUR REFRIGERATOR

OR FREEZER

Risk of child entrapment

Child entrapment and

suffocation are not problems of

thepast.Junked or abondoned

refrigeratorsorfreezersarestill

dangerous –even if they will sit

for “just a few days.”If you are

gettingridofyouroldrefrigerator

or freezer, please follow the

instructions below to help

preventaccidents.

Before you throw away your old refrigerator/ freezer:

•Removedoors.

•Leaveshelvesinplacesochildrenmaynoteasilyclimb

inside.

•Haverefrigerantremoved by a qualified service

technician.

ELECTRICAL INFORMATION

•The refrigerator must be plugged into its own

dedicated 115 Volt, 60 Hz.,AC only electric outlet.

The power cord of the appliance is equipped with a

three-pronggroundingplugfor your protection against

electrical shock hazards. It must be plugged directly

intoaproperly grounded three-prongreceptacle.The

receptacle must be installed in accordance with local

codesandordinances.Consultaqualifiedelectrician.

Do not use an extension cord or adapter plug.

•Immediatelyrepairor replace any power cord that

becomesfrayedordamaged.

•Neverunplugtherefrigeratorbypullingonthepower

cord.Always grip the plug firmly, and pull straight out

fromthe receptacletopreventdamagingthepowercord.

•Unplugtherefrigeratorbefore cleaning and before

replacing a light bulb to avoid electrical shock.

•Performance may be affected if the voltage varies by

10%ormore.Operatingthe refrigerator with insufficient

powercandamagethecompressor.Suchdamageis

notcoveredunderyourwarranty.

•Do not plug the unit into an outlet controlled by a wall

switchorpullcordtopreventtherefrigeratorfrombeing

turnedoffaccidentally.

•AvoidconnectingrefrigeratortoaGroundFault

Interruptor(GFI)circuit.

NOTE:Turningtherefrigerator temperaturecontrolto“0”

turns off the compressor, but does not disconnect

electrical power to the light bulb or other electrical

components.

This Use & Care Manual provides specific operating

instructions for your model. Use the refrigerator only as

instructed in this Use & Care Manual. Before starting the

refrigerator, follow these important first steps.

LOCATION

•Chooseaplacethat is near a groundedelectricaloutlet.

Do Not use an extension cord or an adapter plug.

•If possible, place the refrigerator out of direct sunlight

andawayfromthe range, dishwasher or other heat

sources.

•Therefrigeratormust be installed on a floorthatis level

andstrongenoughto support a fully loadedrefrigerator.

•Considerwatersupplyavailabilityformodelsequipped

with an automatic ice maker.

INSTALLATION

•Do Not installtherefrigeratorwherethetemperature

willdropbelow55°F(13°C)orriseabove110°F(43°C).

Thecompressor will not be abletomaintain proper

temperaturesinsidethe refrigerator.

Do Not block the toe grille on the

lower front of your refrigerator. Sufficient air

circulation is essential for the proper operation of

yourrefrigerator.

InstallationClearances

•Allow the following clearances for ease of installation,

properaircirculation,andplumbingandelectrical

connections:

Sides&Top --------------- 3/8”

Back------------------------ 1”

NOTE: Ifyou see black coils/tubing onthe back of your

refrigerator(air-cooledcondenser) leave3”clearanceat

topofrefrigerator.

DOOR OPENING

NOTE: If your refrigerator is placed with the door hinge

side against a wall, you may have to allow additional

spacesothe door can be opened wider.

Yourrefrigeratorshouldbepositioned to allow easy access

toacounter when removing food.To make this possible,the

directioninwhich thedoorsopencan be reversed.See Door

Removal&Reversal Instructions on page 6.

Installation

LEVELING

All four corners of your refrigerator must rest firmly on a

solidfloor.Yourrefrigeratorisequippedwithadjustablefront

rollers to help level your unit.

ToLevelYourRefrigerator:

1. Removetoe grille.

2. Useflat-blade screwdriver or 3/8”socket wrench

to adjust front rollers.

NOTE: Raisethefrontof the refrigerator enough so the

doorsclosefreelywhen openedhalfway.Therefrigerator

shouldslope¼”to½”fromfront-to-back.Then level the

refrigeratorfrom side to side.

Installation - Connecting Optional Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the

refrigerator from electrical power before connecting a water supply line to the refrigerator.

ToAvoidProperty Damage:

•Copper tubing is recommended for the water supply line. Water supply tubing made of ¼” plastic is not

recommendedsince it greatly increasesthe potential for waterleaks. Manufacturer will notbe responsible for

any damage if plastic tubing is used for supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft

water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

NOTE: Waterline kitnumber5303917950,availablefrom your appliancedealeratadditionalcost,contains 25 feet(7.6

meters)of¼inch ODcoppertubing,asaddletypeshutoffvalve(nonpiercing),(2)¼inchbrasscompressionnuts,(2)

ferrules/sleeves, and instructions for installing a water supply line.

Before Installing The Water SupplyLine, You Will Need

•Basic Tools: adjustablewrench, flat-blade screwdriver,andPhillipsTM screwdriver

•Access to a household cold water line with water pressure between 20 and 120 psi.

•Awatersupply line made of ¼inch(6.4 mm) OD, copper tubing.To determine thelength of copper tubing needed,

you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water

pipe.Then add approximately 7feet(2.1 meters), so the refrigerator canbe moved out for cleaning (asshown).

•Ashutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type

shutoff valve.

•A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may

causeicemaker to cycletwoorthreetimes beforemakingafulltray of ice.Newplumbingmaycause ice tobediscolored

orhavepoorflavor.Discardicemadeduringthefirst24hours.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnectrefrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply

and flush supply line until water is clear. Turn OFF water supply at shut

off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,

asshown.

5. Push water supply line into water valve inlet as far as it will go (¼inch).

Slide ferrule(sleeve) into valve inlet and finger tighten compression nut

ontovalve.Tighten another half turnwithawrench;DO NOT overtighten.

6. With steel clamp and screw, secure water supply line to rear panel of

refrigeratorasshown.

7. Coilexcess water supplyline(about 2½turns) behind refrigerator as shown

and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that

leak.

9. Reconnectrefrigerator to electrical power source.

10. Toturnicemakeron,lowerwire signal arm (see ice maker front coverforON/

OFF position of arm).

Door Removal and Reversal Instructions

NOTE: Ifyou have stainless steel doors--gototheRemovingStainless

SteelDoorsandHandlesSection on page 9.

NOTE:The direction in which your refrigerator doors open (door swing)

can be reversed, from left to right or right to left, by moving the door

hinges from one side to the other. Reversing the door swing should be

performedbyaqualifiedperson.

IMPORTANT: Before youbegin,turn therefrigeratortemperature control

to“0”andremovetheelectricalpower cord from thewalloutlet.Remove

any food from door shelves.

1. Removetoe grille andtophingecover.

2. Remove top hinge with 3/8”hex driver and lift freezer door off of

centerhingepin. Set door aside.

3. Unscrewcenter hinge pinusingadjustablewrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and

loosening two outside screws enough to allow hinge and shim to

slideout.Tighten screws.

6. Loosentwo outside screwsonoppositeside of refrigerator, remove

insidescrewand install center hinge.

7. Removebottom hingewith3/8”hexdriver.Reinserttwooutsidescrews

inholes and tighten. Inside screw will go to opposite side in step 8.

8. Removetwo outside screwsonoppositeside of refrigeratorandinstall

bottom hinge. Insert and tighten screw saved from step 7.

9. Unscrewbottom hinge pin using adjustable wrench.Movehingepin

toother hole in hinge and tightenwith adjustable wrench.

10. Reversedoorhandles(seeinstructionson next page).

11. Movefreezerandrefrigeratordoorstops to opposite side. Before

starting screws, use an awl to puncture the foam.

12. Positionrefrigeratordoorontobottomhingepinandscrewcenter

hingepinthroughcenter hinge into topofdoor.Closerefrigeratordoor

tohelp align hinge hole.

13. Tightencenterhingepinwithadjustablewrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lowerfreezerdoorontocenterhingepin.

16. Close freezer door. Have an assistant lift up on opposite side of door

while tightening screws to install top hinge.

17. Replacetoegrilleandtophingecover.

18. Pluginelectricalpowercordandturnrefrigeratortemperaturecontrol

to center position.Adjust setting as necessary.

DOOR REMOVAL AND REVERSAL INSTRUCTIONS:

Door Removal and Reversal Instructions (continued)

NOTE:Some models have “pocket”handles,whicharerecessed into the sides of the door. On these models, only the

hingeswill need to be reversed.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwo screws attachinghandletobottom of freezer door.

2. Remove short trim piece by sliding trim straight up and off of handle

bracket.

3. Removescrew attaching topofhandle to door.

4. MagneticNameplate Models: Gentlypry magneticnameplateframe from

door.Removenameplatefromitsframe, turn frame upside down and

install in old handle holes. Insert magnetic nameplate into frame.

Self-Adhesive Nameplate Models: Gentlypeel off nameplate from door

andreapplyoveroldhandle holes.

TO ATTACH FREEZER HANDLE:

1. Reinstall handle on opposite side, using same hole as nameplate.

2. Attach handle to bottom of door.

3. Slide trim piece straight down onto handle bracket.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwo screws attachinghandletobottom of freezer door.

2. Swing bottom of handle away from the door and slide handle straight up

and off of dovetail button.

3. Remove screw and dovetail button and install on other side, using the

same holes as nameplate.

4. Magnetic Nameplate Models: Use putty knife to gently pry magnetic

nameplateframefromdoor.Removenameplatefromitsframe,turnframe

upside down and install in old handle holes. Insert magnetic nameplate

intoframe.

Self-AdhesiveNameplateModels: Useputtyknife togentlypeeloffname

platefromdoor and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door.Place top of handle over dovetail

button,swing handle into an uprightposition and pull downward, lockingit

into place.

2. Securebottom of handlewithtwoscrews removed earlier.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwo screws attachinghandletobottom of freezer door.

2. Remove button plug using edge of putty knife.

3. Removescrew on sideoffreezer door and remove handle.

TO ATTACH FREEZER HANDLE:

1. Secure side of handle to door and replace button plug.

2. Securehandle to bottomofdoor.

NOTE:To remove freezer handle, refer to figure 3 on page 9.

Door Removal and Reversal Instructions (continued)

TRIM REMOVAL(FULL-LENGTH TRIM MODELS ONLY)

In some models, the refrigerator door has a full length trim piece which

continuesfromthebottomofthe handle to the bottom of the door.Thetop

ofthetrimattachestothe handle bracket (Figure 1) or fits around the base

ofthe handle(Figure2).An adhesive“trimlock”ispositionedabouthalfway

down.The bottom ofthetrimisheld in placebyeitheranadhesive trim lock,

or a trim lock with two prongs inserted into a hole on the face of the door.

TO REMOVE TRIM:

1. Removetrim by gently pulling trim lock areasout and away from door.

2. When trim is free from door, slide the trim straight down and away

from base of handle.

NOTE:Formodelswithshorthandletrim,removebyslidingtrimstraight

down and off of handle bracket.

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

Figure 1 Style Handles

1. Removetwo screws attaching handle totopofrefrigeratordoor.

2. Removescrew attaching bottomofhandle to door.

3. Remove two hole plugs and hinge pin plug on top of door and install

on opposite side. Use Phillips head screwdriver to remove plastic

screw plug from front of door and install on opposite side

Figure 2 Style Handles

1. Removetwo screws attaching handletotopof refrigerator door.

2. Swingtop ofhandle away from doorand slide handle down andoff of

dovetailbutton.

3. Remove screw and dovetail button and install on other side, moving

holeplugs from corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

Figure 1 Style Handles

1. Securebottom ofhandlewith screws.

2. Secure top of handle with screws.

Figure 2 Style Handles

1. Start with handle offset away from door.Place bottom of handle over

dovetailbutton,swinghandleintoan upright position and pull upward,

locking it into place.

2. Secure top of handle with screws.

TO ATTACH TRIM:

1. Slide both trim locks out of trim.

2. Insert new adhesive trim locks contained in your literature pack.

NOTE: Trim lock must be removed and installed by sliding over the

twodonutshapedareas.

3. Install trim to handle by sliding under base of handle. Carefully align

trimand press down at trim lock locations.

4. Use rubbing alcohol to remove any adhesive residue from old trim

lock locations.

Figure 1

Figure 2

Door Removal and Reversal Instructions (continued)

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Removetwo screws attaching handle totopofrefrigeratordoor.

2. Remove button plug using edge of putty knife.

3. Removescrew on side of refrigeratordoorandremovehandle.

4. Reversefreezer and refrigerator handlesasshowninfigure3.

TO ATTACH REFRIGERATOR HANDLE:

1. Secure side of handle to door and replace plug button.

2. Securehandle to topofdoor.

REMOVING STAINLESS STEEL DOORS AND HANDLES

Use care when using tools near surface of stainless steel doors to avoid scratching.

To Remove Doors

Stainlesssteeldoorsare not reversible. Follow these steps to remove doors.

1. Removetoe grille andtophingecover.

2. Remove top hinge and lift freezer door off of center hinge pin. Set door

aside.

3. Unscrewcenter hinge pinusingadjustablewrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Removecenter hinge andshimby removing inside screw and loosening

two outside screws enough to allow hinge to slide out.

6. Remove bottom hinge. Reinserttwooutsidescrewsinholesandtighten.

7. Reverse steps 1 - 6 to reinstall doors

To Remove Handles

1. Firmlyhold freezer handlewhileloosening set screws with 3/32”allen

wrench.Removefreezer handle.

2. Repeatstep 1 for refrigerator door.

Figure 3 - Handle Reversal

Refrigerator Door Without Trim

Typical Handle

Features At A Glance

Features may vary according to model

Andere Handbücher für FRT21S6AW2

Inhaltsverzeichnis

Sprachen:

Andere Frigidaire Kühlschrank Handbücher

Frigidaire

Frigidaire GLHS68EEPB0 Benutzerhandbuch

Frigidaire

Frigidaire FRT18S6A Bedienungsanleitung

Frigidaire

Frigidaire FRS23KF5D Bedienungsanleitung

Frigidaire

Frigidaire EFR840 Bedienungsanleitung

Frigidaire

Frigidaire FRT18G4A Bedienungsanleitung

Frigidaire

Frigidaire FRFG1723AV Bedienungsanleitung

Frigidaire

Frigidaire FRS6HR5JMB - FRS6HR5H 26 cu. Ft.... Benutzerhandbuch

Frigidaire

Frigidaire FRS26KR4A Bedienungsanleitung

Frigidaire

Frigidaire FRU17B2JW5 Bedienungsanleitung

Frigidaire

Frigidaire FRS26HF7B Bedienungsanleitung

Frigidaire

Frigidaire FRS26WGHW0 Bedienungsanleitung

Frigidaire

Frigidaire FRS20ZGJ Bedienungsanleitung

Frigidaire

Frigidaire FRS6B5EE Bedienungsanleitung

Frigidaire

Frigidaire FRT18G5A Bedienungsanleitung

Frigidaire

Frigidaire FRU17G4JW - Broan : 16.7 cu. Ft. All... Stücklistenhandbuch

Frigidaire

Frigidaire FGUS2632LE Montageanleitung

Frigidaire

Frigidaire FRT22QGJ Bedienungsanleitung

Frigidaire

Frigidaire GLHS36EFS Bedienungsanleitung

Frigidaire

Frigidaire FGHS2644K - Gallery 26.0 cu. Ft.... Bedienungsanleitung

Frigidaire

Frigidaire FRTB7B4EMB1 Bedienungsanleitung

Frigidaire

Frigidaire FRT21INLH Bedienungsanleitung

Frigidaire

Frigidaire FRT18B4A Bedienungsanleitung

Frigidaire

Frigidaire Gallery GRMC2273BF Bedienungsanleitung

Frigidaire

Frigidaire FGHT2146KE Montageanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung