Frigidaire FSC23F7HB8 Bedienungsanleitung

Local

[] Electro|ux

Solutions Hotline

(United States)

1-800-944-9044

(Canada)

1-800-668-4606

Resolve many service issues over the

phone at your convenience!

if we can't resolve your service issue,

we'll schedule a reputable local

service technician for you!

Order Genuine Electrolux Parts &

Accessories

qPurchase Extended Warranty

Protection

important Safety instructions ............. 2

installation ............................................ 3

Connecting Water Supply .................... 4

Door Removal instructions .................. 5

Temperature Controls ......................... 6

Automatic ice & Water Dispenser ....... 8

Replacing Air Filter .............................. 13

Normal Operating Sounds & Sights ... 14

Care and Cleaning ................................ 15

Warranty ................................................ 16

Before you Call ..................................... 17

Features at a Glance ............................ 21

READ AND SAVE THESE INSTRUCTIONS PN:241857500(April2007)

FOR YOUR SAFETY

,, Do not store or use gasoline, or other flammable liquids in

the vicinity of this or any other appliance. Read product

labels for warnings regarding flammability and other

hazards.

,, Do not operate the refrigerator in the presence of

explosive fumes.

,, Avoid contact with any moving parts of automatic ice

maker.

,, Remove all staples from the carton. Staples can cause

severe cuts, and also destroy finishes if they come in

contact with other appliances or furniture.

CHILD SAFETY

Destroy or recycle the carton, plastic bags, and any exterior

wrapping material immediately after the refrigerator is

unpacked. Children should NEVER use these items to play.

Cartons covered with rugs, bedspreads, plastic sheets or

stretch wrap may become airtight chambers, and can quickly

cause suffocation.

electrical shock hazards. It must be plugged directly into a

properly grounded three prong receptacle. The receptacle

must be installed in accordance with local codes and

ordinances. Consult a qualified electrician. Avoid

connecting refrigerator to a Ground Fault Interruptor (GFI)

circuit. Do not use an extension cord or adapter plug.

,, If the power cord is damaged, it should be replaced by an

authorized service technician to prevent any risk.

,, Never unplug the refrigerator by pulling on the power

cord. Always grip the plug firmly, and pull straight out

from the receptacle to prevent damaging the power cord.

,, Unplug the refrigerator before cleaning and before

replacing a light bulb to avoid electrical shock.

,, Performance may be affected if the voltage varies by

10% or more. Operating the refrigerator with insufficient

power can damage the compressor. Such damage is

not covered under your warranty.

,, Do not plug the unit into an electrical outlet controlled by a

wall switch or pull cord to prevent the refrigerator from

being turned off accidentally.

PROPER DISPOSAL OFYOUR REFRIGERATOR OR

FREEZER

Risk of child entrapment

Child entrapment and suffocation

are not problems of the past.

Junked or abandoned refrigerators

or freezers are still dangerous -

even if they will sit for "just a few

days." If you are getting rid of your

old refrigerator or freezer, please

follow the instructions below to

help prevent accidents.

Before you throw away your old refrigerator/freezer:

,, Remove doors.

,, Leave shelves in place so children may not easily climb

inside.

,, Have refrigerant removed by a qualified service

technician.

ELECTRICAL iNFORMATION

,, The refrigerator must be plugged into its own

dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical

outlet, The power cord of the appliance is equipped with a

three-prong grounding plug for your protection against

ThisUse&CareManualprovidesgeneraloperating

instructionsforyourmodel.Usetherefrigeratoronlyas

instructedinthisUse&CareManual.Beforestartingthe

refrigerator, follow these important first steps.

LOCATION

oChoose a place that is near a grounded electrical outlet.

Do Not use an extension cord or an adapter plug.

o If possible, place the refrigerator out of direct sunlight

and away from the range, dishwasher or other heat

sources.

o The refrigerator must be installed on a floor that is level

and strong enough to support a fully loaded refrigerator.

Consider water supply availability for models equipped

with an automatic ice maker.

iNSTALLATiON

LEVELING

All four corners of your refrigerator must rest firmly on a solid floor.

Your refrigerator is equipped with adjustable front rollers to help level

your unit.Toensure proper door seal and assist door closing, the

refrigerator should be tilted 1/4" (6 mm), front to back.

ToLevel Your Refrigerator:

1. Remove toe grille. (See 'To Remove ToeGrille".)

2. Use flat-blade screwdriver or 3/8" socket wrench to adjust

front rollers.

Raise

Installation Clearances

o Allow the following clearances for ease of installation,

proper air circulation, and plumbing and electrical

connections:

Sides & Top 3/8"

Back 1"

DOOR OPENING

3, Check both doors to be sure seals touch cabinet on all four

sides.

iii i

Your refrigerator should be positioned to allow easy access to a

counter when removing food. For best use of drawers and freezer

baskets, the refrigerator should be in a position where both the

refrigerator and freezer doors can be fully opened.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON

water supply and flush supply line until water is clear. Turn

OFF water supply at shutoff valve.

3. Unscrew plastic cap from water valve inlet and discard

cap.

4. Slide brass compression nut, then ferrule (sleeve) onto

water supply line, as shown.

5. Push water supply line into water valve inlet as far as it will

go (¼ inch). Slide ferrule (sleeve) into valve inlet and

finger tighten compression nut onto valve. Tighten another

half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to

rear panel of refrigerator as shown.

7. Coil excess water supply line (about 2Y2turns) behind

refrigerator as shown and arrange coils so they do not

vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any

connections that leak.

9. Reconnect refrigerator to electrical power source.

10. To turn ice maker on, lower wire signal arm (side mounted)

or set the ice maker's On/Off power switch to the "r'

position _rear mounted).

Plastic Water Tubing

to Ice Makel

Fill Tube Clamp

Brass

ComF "ess_en

Before Installing The Water Supply Line, You Will Need:

, Basic Tools: adjustable wrench, flat-blade screwdriver,

and Phillips TM screwdriver

,, Access to a household cold water line with water pressure

between 30 and 100 psi.

,, A water supply line made of ¼ inch (6.4 ram) OD, copper

tubing. To determine the length of copper tubing needed,

you will need to measure the distance from the ice maker

inlet valve at the back of the refrigerator to your cold water

pipe. Then add approximately 7 feet (2.1 meters), so the

refrigerator can be moved out for cleaning (as shown).

,, A shutoff valve to connect the water supply line to your

household water system. DO NOT use a self-piercing type

shutoff valve.

,, A compression nut and ferrule (sleeve) for connecting the

water supply line to the ice maker inlet valve.

water line

\ Valve Inlet

falve

Copper water line

from nousenola water supply

Include enougn tUeleg In loop to allO_

moving refrigerator out for cleaningj

fTootsNecessary:

---D0or

Lower

Hinge

DOOR REMOVAL iNSTRUCTiONS:

if it is necessary to move the refrigerator through narrow doorways, follow these

steps to remove the doors.

Before you start:

1 Make sure the electrical power cord is unplugged from the wall outlet.

2 Remove any food from the door shelves.

3 Close the doors.

To remove the hinge cover: (some models)

1 Remove the three screws from the cover over the top door hinges.

2 Pull the cover forward about a half inch and lift it off.

To remove the refrigerator door:

1 Remove top hinge cover screw on refrigerator door and remove cover. (some models)

2 Trace lightly around the door's top hinge with a pencil. This makes reinstallation easier.

3 Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it

aside.

4 Remove the three bottom hinge screws and hinge, if necessary.

To remove the freezer door:

1 Detach the multi-wire cable connector located above the top hinge. Grasp both sides of

the connector firmly and pull apart.

2 Remove top hinge cover screw on freezer door and remove cover. (some models)

3 Trace lightly around the door's top hinge with a pencil. This makes reinstallation easier.

4 Detach the water tube from the connector located below the freezer door. The connector

releases when you press its outer sleeve inward.

5 Remove the screws from the top hinge and pull the multi-wire cable through it.

6 Lift the door off of the bottom hinge. Lay the door on its side to avoid damage to the

Remove the three bottom hinge screws and hinge, if necessary.

To reinstall the refrigerator and freezer doors, reverse the above steps.

r ,,

"toD SCO..ECT

1. Press outer rir_g against face

push until mark touches face of fitting

Hinge

Mu t -W re

=Top

ALLOWING COOLINGTIME BEFORE USE

To ensure safe food storage, allow your refrigerator to operate with

the doors closed for at least 8to 12 hours before placing food inside.

During this cooling period, you do not need to adjust the controls,

which are preset at the factory.

SETTING COOLINGTEMPERATURES

Your refrigerator comes with a state-of-the-art electronic digital

control system. The system's control panel is located at the top ofthe

the fresh food compartment.

The two digital displays on the left half of the control panel indicate

the current settings or temperatures of your freezer and fresh food

compartments. The models with a 2-digit temperature display are for

reference only, and do not display the current accurate compartment

temperature. Should you desire to see what the current accurate

temperature is, place a separate thermometer inside the freezer or

fresh food compartment in the desired location.

TEMPERATURE ADJUSTMENT

After 24 hours, adjust the controls as needed. Make your

adjustments small and gradual; allowing time for temperatures

to change and stabilize. Refer to the adjacent guidelines for

temperature settings.

To adjust the temperature to a higher or lower setting, press the

Up or Down button closest to the display. The first time you

press the button, the display shows the last setting you entered.

Each press of the button after that increments the setting by

one degree.

The display shows your new setting momentarily, then changes

back to the current temperature.

Temperature Adjustment Guide

Warm / Adjust Fresh Food control one degree

If Fresh Food compartment is too hcolder by pressing Down (Colder) button.

If Fresh Food compartment istoo cold / Adjust Fresh Food control one degree

Lwarmer by pressing the Up (Cold) button

Freeze!-compa_ent is too warm [ Adjust Freezer control one degree colder

If [by pressing Down (Colder) button.

[ Adjust Freezer control one degree warmer

If Freezer compartment is too cold Lby pressing the Up (Cold) button

IFTEMPERATURE DISPLAYS FLASH...

if ever you see both temperature displays continously flashing,

it may indicate that the control system has detected a

performance problem. Call your service representative, who

can interpret the flashing message.

To maintain temperatures, a fan circulates air in the refrigerator

and freezer compartments. For good circulation, do not block

cold air vents with food items.

iii

Temperature Display (2-Digit)

Freezer Fresh Food

AIR FILTER iNDiCATOR & STATUS LIGHTS

Your refrigerator's air filter needs to be replaced from time to

time. You can monitor the need for replacement by referring to

the status light while the air filter is "ON". To turn on the air filter,

press the "Air Filter" button. Toturn off the air filter, press the

"Air Filter" button. To RESET the air filter, press the "Air Filter"

button and hold for 3 seconds.

Air Filter Status Light (not available on all models)

Green Filter OK.

Yellow Air filter is about 80 percent used. Please order new one.

Red Air filter is 100 percent used. Please change now.

Cooling System On/Off Button Alarm Reset Button Indicator Lights

TURNING THE COOLING SYSTEM ON AND OFF

You can disable the cooling system in your refrigerator by pressing the On/Off button located on the left side of the temperature

control panel. To ensure that you do not accidentally turn off the cooling system, the button does not work unless you press and

hold it for three seconds. Once you disable the cooling system, all refrigeration to the freezer and fresh food compartments stops.

To turn the cooling system back on, you must again press and holdthe On/Off button for three more seconds.

SYSTEM MONITORING ALARMS (Select Models)

The electronic control system continuously monitors your

refrigerator/freezer for temperature consistency, doors

left ajar, and power failures, Variances from normal

operating conditions are communicated by audible tones

and a set of four status indicator lights,

USING THE ALARM RESET BUTTON

You can disable or activate the alarm system by pressing

and holding the Reset button for three seconds. Use it,

for example, to turn off audible tones and/or flashing

indicator lights.

Once you disable the alarm system, you must again

press and hold the Alarm Reset button for three more

seconds to reset (activate) the alarm system.

The On indicator light remains off while the freezer and

refrigerator compartments cool toward the current

cooling settings, When temperature settings are reached,

the On light displays green to indicate an active alarm

system,

RESPONDING TO ALARMS (AudibleTones &indicator

Lights)

Your refrigerator's control system can convey the

following information through audible tones and the alarm

indicator lights.

Alarm Light

On (light is

off)

Tone Condition How To Respond

Alarm system is Iffreezer and refrigerator

notactivewhile

freezerand

refrigerator

compartments

arecooling

towardthe

current

temperature

settings.

compartments do not match

your temperature settings in

three hours, expect the

control system to signal other

conditions. Ifcooling does

not stabilize toward your

current settings call for

assistance, using the phone

number on the back page of

this Use & Care Guide.

Steady Alarm system is No response required.

Green active.

Door Flashing _ Freezer or Close door to disable and reset

Ajar Green refrigerator alarm.

door has been

open for over

five minutes.

High Flashing _ Freezer or Press Alarm Reset button to

Temp Amber refrigerator turn off alarm. If

compartment temperatures do not

has been too improve, call for assistance,

warm (7.2° C using the phone number on

or higher) for the back page of this Use &

over an hour. Care Guide.

Power Flashing

Failure Amber A power outage Press Alarm Reset button to

was detected, turn off alarm and press

again to reset. Check if the

power failure lasted tong

enough to affect stored food

temperatures.

AUTOMATIC iCE & WATER DISPENSER OPERATING iNSTRUCTiONS

Oeeee e

E_,_mol..... _oi_ Cube Crush [ighf F,i__,_i lo_k

EXTREME

FREEZE

EXTRA

ICE

CUBE

CRUSH

LIGHT

FILTER

STATUS

LOCK

WATE R

To freeze food at a faster rate to preserve freshness, push the Touch Pad O for 3-5 seconds to

activate this feature. A green light will appear above the Touch Pad. Push the Touch Pad I_again

for 3-5 seconds to deactivate.

To increase ice production for special occasions, such as parties, push the Touch Pad Oor

3-5 seconds to activate this feature. A green light will appear above the Touch Pad. Push the

Touch Pad O again for 3-5 seconds to deactivate. Extra Ice should produce 25% to 50% more ice

every 24 hours.

Press the CUBE Touch Pad O to get cubed ice. A green light will appear above the Touch Pad.

Press glass against ICE dispensing paddle O as far up as possible to catch all ice.

Press the CRUSH Touch Pad O to get crushed ice. A green light will appear above the Touch Pad.

Press glass against ICE dispensing paddle Oas far up as possible to catch all ice.

Press the LIGHT Touch Pad O to turn on dispenser light. Press O again to turn the light off.

The light also turns on automatically when ice and/or water is dispensed. Replace light bulb with

an appliance bulb of the same wattage.

The FILTER STATUS indicator light above the Touch Pad _vill light up each time the dispenser

is used. The following filter light indications are:

Green The filter is still operating within its specified life cycle.

Amber The filter has reached approximately 80% of its useful life. This is the recommended time

to purchase a replacement filter.

Red The filter is 100% used up. Change the filter as soon as possible.

After the filter cartridge has been changed, press and hold the FILTER RESET Touch Pad Qfor

10-15 seconds.

NOTE: The Green, Red and Amber lights Will flash When reset is completed.

The Ice & Water Dispenser can be locked out to prevent unwanted use.

To Lock Out Press the LOCK Touch Pad _ for 3-5 seconds. A Red light will appear above

the Touch Pad.

To Unlock Press the LOCK Touch Pad O for 3-5 seconds until the Red light above the

Touch Pad qoes out.

To operate the water dispenser, press a glass against the WATER disp_nsing paddle 0. To

stop dispensing water, pull the glass away from the dispensing paddle _. Dispensed water is not

cold. For colder water, add crushed ice or cubes before dispensing water. A drip tray located at

the base of the dispenser catches small spills and allows them to evaporate. This drip tray is

removable and dishwasher safe. Do not pour water and excess ice in this area because there

is no drain.

AUTOMATIC ICE &WATER DISPENSER OPERATING iNSTRUCTiONS

0000

o o ® _ !

UC_ L_ht " •

Features may vary according to model.

Crush Press the Crush Touch Pad Oto get crushed ice. A red indicator will appear above the Touch Pad. Press glass against

ICE dispensing paddle O asTar up as possible to catch all ice.

Cube Press the Cube Tou£ch Pad O to get cubed ice. A red indicator will appear above the Touch Pad. Press glass against ICE

dispensing paddle Q as far up as possible to catch all ice.

Light On Press the Light On Touch Pad O to turn on dispenser light. A red indicator will appear above the Touch Pad.

Light Oft Press the Light Off Touch Pad O to turn off dispenser light. A red indicator will appear above the Touch Pad.

WATER To operate the water dispenser, press a glass against the WATER dispensing paddle _l_. To stop dispensing water, pull

the glass away from the dispensing paddle O . Dispensed water is not cold. For c_der water, add crushed ice or

cubes before dispensing water. A drip trayq-ocated at the base of the dispenser catches small spills and allows them to

evaporate. This drip tray is removable and dishwasher safe. Do not pour water and excess ice in this area because there

is no drain.

HOW TO PRIME THE WATER SUPPLY SYSTEM

Your refrigerator's water supply system includes several

tubing lines, a water filter, a water valve and a water tank. To

ensure that your water dispenser works properly, this

system must be completely filled with water when your

refrigerator is first connected to the household water

supply line and whenever you replace the water filter.

TO PRIME THE WATER SUPPLY SYSTEM:

Begin filling the tank by pressing and holding a drinking

glass against the water dispenser paddle.

Keep the glass in this position until water comes out of

the dispenser. There will be noticeable spurts and

sputters as the system pushes air out through the

system and dispenser nozzle. This is normal. This may

take about 1'/2 minutes.

Continue dispensing water for about 3 minutes to flush

the system of any air and impurities. Empty glass as

needed.

HOW THE ICE MAKER WORKS

The ice maker and container are located in the top of the

freezer compartment. After the refrigerator is installed properly

and has cooled for several hours, the ice maker can begin

making ice within 24 hours. Air in new plumbing lines may

cause the ice maker to cycle two or three times before making

a full tray of ice. With no usage, it will take approximately two

days to fill the ice container.

Because of new plumbing connections, the first production of

ice cubes may be discolored or have an odd flavor. Discard

ice made during the first 24 hours.

TURNING YOUR SIDE MOUNTED ICE MAKER ON/OFF

To begin ice production, lower the wire signal arm to the

DOWN or ON position. The ice maker turns off automatically

when the ice container becomes full. To stop the ice maker,

raise the wire signal arm until it clicks and locks in the UP or

OFF position (see Figure 1).

TURNING YOUR REAR MOUNTED ICE MAKER ON/OFF

ICE PRODUCTION: WHAT TO EXPECT

How Much Ice Will a Side Mounted Ice Maker

Produce in 24 Hours?

A side mounted ice maker will produce 4 to 4.5 pounds of

ice every 24 hours, depending on usage conditions. Ice is

produced at a rate of 8 cubes every 75 to 90 minutes.

How Much ice Will a Rear Mounted ice Maker

Produce in 24 Hours?

A rear mounted ice maker will produce 3 to 4 pounds of ice

every 24 hours, depending on usage conditions. Ice is

produced at a rate of 8 cubes every 75 to 90 minutes.

Ice production is controlled by the ice maker's ON/OFF power

switch. To gain access to the ice maker, pull the ice cream

shelf out. Press the switch to the "O" position to turn it Off and

press it to the 'T' position to turn it On (see Figure 2). The ice

maker also has a built-in wire signal arm, which automatically

stops ice production when the ice bin is full. DO NOT use this

signal arm to manually stop the ice maker.

Figure 1Figure 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Frigidaire Kühlschrank Handbücher

Frigidaire

Frigidaire FRT18P5A Bedienungsanleitung

Frigidaire

Frigidaire FRT18KG4D Bedienungsanleitung

Frigidaire

Frigidaire FRT16CNH Bedienungsanleitung

Frigidaire

Frigidaire GLHT216TA Bedienungsanleitung

Frigidaire

Frigidaire PLHS238ZC Bedienungsanleitung

Frigidaire

Frigidaire FRS3R2F Bedienungsanleitung

Frigidaire

Frigidaire GLHS38EGW6 Leitfaden

Frigidaire

Frigidaire FRS23H7CS Bedienungsanleitung

Frigidaire

Frigidaire FGTR1837TD Betriebsanleitung

Frigidaire

Frigidaire EFMIS351 Bedienungsanleitung

Frigidaire

Frigidaire FRT18G5F Bedienungsanleitung

Frigidaire

Frigidaire FRT21S6A Bedienungsanleitung

Frigidaire

Frigidaire FPHT2097VF Betriebsanleitung

Frigidaire

Frigidaire FRS26KF6D Bedienungsanleitung

Frigidaire

Frigidaire PLRH1779GS Bedienungsanleitung

Frigidaire

Frigidaire Gallery FGHC2335LE Montageanleitung

Frigidaire

Frigidaire GLRT214RA Bedienungsanleitung

Frigidaire

Frigidaire FRT22QGJ Bedienungsanleitung

Frigidaire

Frigidaire FGRU19F6QFA Betriebsanleitung

Frigidaire

Frigidaire GLRT188WD Bedienungsanleitung

Frigidaire

Frigidaire PLRU1777DS0 Bedienungsanleitung

Frigidaire

Frigidaire FRT22IRSHK5 Bedienungsanleitung

Frigidaire

Frigidaire FSC23F7H Bedienungsanleitung

Frigidaire

Frigidaire FRT18KD3A Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung