Fritz! Fritz!Repeater 1200 Bedienungsanleitung
Quick Start Guide
Repeater
1200
3
Package Contents
Part Illustration
1 FRITZ!Repeater1200
1 network cable
Security
• Operate the FRITZ! Repeater 1200 in a dry place that is free of dust and
protected from direct sunlight, and provide for sucient ventilation.
• The FRITZ!Repeater 1200 is intended for indoor use only. Never let liquids
get inside the housing.
• Insert the FRITZ!Repeater1200 into an electrical outlet that is easy to reach.
• Do not open the FRITZ!Repeater 1200 housing. Opening and/or repairing the
device can present a hazard.
• Unplug the FRITZ!Repeater 1200 from the outlet before cleaning. Clean the
device using a moist cloth.
4
LED
Meaning Function
“Connect”
button
Press for 1 second:
Start connecting
Press for 6 seconds:
Connect with other
access point
Press for 15 seconds:
Factory settings
LED
on connected with FRITZ!Box, good connection
ashing
• slowly (every 2 seconds): not connected with
FRITZ!Box, no Wi-Fi connection set up
• fast (twice per second): WPS, restart or up-
date in progress
on weak connection to FRITZ!Box
ashing connection to FRITZ!Box interrupted
o • Wi-Fi disabled
• schedule enabled (wireless bridge)
“LAN” socket Connect network devices or internet router via cable
5
Access Modes
The FRITZ!Repeater 1200 can work in two dierent access modes:
Wireless Bridge (preset)
In “wireless bridge” access mode, the
FRITZ!Repeater and your FRITZ!Box
(router) are connected via Wi-Fi. The
FRITZ!Repeater can expand the
network by oering connections to
computers and other network devices
via Wi-Fi or LAN cable. Continue read-
ing on page 6.
LAN
Wi-Fi
Wi-Fi
Power/DSL
WLAN
Fon/DECT
Connect/WPS
Info
LAN Bridge
In “LAN bridge” access mode, the
FRITZ!Repeater and your FRITZ!Box
(router) are connected by LAN cable.
The FRITZ!Repeater can expand the
network by oering Wi-Fi connections
to computers and other network
devices.
If you would like to connect the
repeater with your FRITZ!Box by cable,
congure “LAN bridge” access mode in
the user interface of the FRITZ!Repeat-
er. Continue reading on page 10.
LAN
Wi-Fi
Power/DSL
WLAN
Fon/DECT
Connect/WPS
Info
6
Connecting the FRITZ!Repeater to the Wireless
Router at the Touch of a Button (WPS)
1. Plug the FRITZ!Repeater into an
outlet near your FRITZ!Box. The
FRITZ!Repeater starts operation.
2. Wait until the LED starts slowly
ashing green. As soon as the
LED slowly ashes green, the
FRITZ!Repeater is ready for a
connection.
3. Press the “Connect” button. The
LED ashes green more rapidly.
4. Within 2 minutes, start WPS on
your FRITZ!Box:
• FRITZ!Box with “WPS” or “Con-
nect/WPS” button: Press button
briey
• FRITZ!Boxes with “WLAN” or
“WLAN/WPS” button: Press
button for about 6 seconds until
the “WLAN” LED ashes.
• When the LED on the FRITZ!Re-
peater lights up permanently,
the Wi-Fi connection has been
established.
7
Connecting the FRITZ!Repeater to the Wireless
Router at the Touch of a Button (WPS)
If the LED starts ashing slow-
ly green again, the connection
was not established. Repeat
the connection instructions
starting from step 3.
5. Insert the FRITZ!Repeater into
an outlet located about halfway
between the FRITZ!Box and
the wireless devices to be
added to the Wi-Fi network.
The FRITZ!Repeater and your
FRITZ!Box connect once more.
The LED lights up once the con-
nection has been established.
Power/DSL
WLAN
Fon/DECT
Connect/WPS
Info
Wi-Fi
Wi-Fi
LED lights up green: the
FRITZ!Repeater has a good Wi-Fi
connection and is ready for operation.
LED lights up orange: the
FRITZ!Repeater has a weak Wi-Fi
connection. Plug the FRITZ!Re-
peater into an outlet closer to your
FRITZ!Box.
LED continuously ashes
orange: cannot connect via Wi-Fi.
Plug the FRITZ!Repeater into an
outlet closer to your FRITZ!Box.
With the FRITZ!App WLAN you
can determine the optimum
position for your
FRITZ!Repeater in the home
network of your FRITZ!Box;
see page 13.
8
Connecting the FRITZ!Repeater to the
Wireless Router Using the Wizard
If your wireless router does not support setup at the touch of a button (WPS),
use the wizard to connect the FRITZ!Repeater with the wireless router.
1
Establishing a Connection to the Computer
1. Plug the FRITZ!Repeater into an outlet near your wireless router. The
FRITZ!Repeater starts operation.
2. Wait until the LED starts slowly ashing green.
3. Select the Wi-Fi network of your FRITZ!Repeater on the computer, and start
the connection process.
4. Enter the network key of the FRITZ!Repeater. The precongured unique
network key is printed on the back of this guide and on the back of the
device housing.
The computer establishes a connection to the FRITZ!Repeater.
9
Connecting the FRITZ!Repeater to the
Wireless Router Using the Wizard
If your wireless router does not support setup at the touch of a button (WPS),
use the wizard to connect the FRITZ!Repeater with the wireless router.
2
Running the Wizard
1. Open the web browser on your computer and enter http://fritz.repeater in
the address bar.
2. The conguration wizard appears and guides you through setup of the Wi-Fi
connection between the FRITZ!Repeater and your wireless router.
3. Insert the FRITZ!Repeater into an outlet located about halfway between the
wireless router and the wireless devices to be added to the Wi-Fi network.
The FRITZ!Repeater and the wireless router connect once more.
LED lights up green: the FRITZ!Repeater has a good Wi-Fi connection
and is ready for operation.
LED lights up orange: the FRITZ!Repeater has a weak Wi-Fi connection.
Insert the the FRITZ!Repeater into an outlet closer to the wireless router.
LED continuously ashes orange: cannot connect via Wi-Fi. Insert the
the FRITZ!Repeater into an outlet closer to the wireless router.
10
Connecting the FRITZ!Repeater to the
Router via LAN
If you would like to connect the FRITZ!Repeater with your FRITZ!Box (router)
by cable, congure “LAN bridge” access mode in the user interface of the
FRITZ!Repeater.
Conguring LAN Bridge
1. Connect the FRITZ!Repeater with your computer via LAN cable.
2. Plug the FRITZ!Repeater into a power outlet and wait about 1 minute until
the FRITZ!Repeater has started and the LED ashes slower.
3. Open a web browser an enter http://fritz.repeater.
The user interface appears.
4. Assign a password and click on “OK".
5. Enter the password again and click on “Log In” and “Next”.
6. Enable the “LAN bridge” access mode and click on “Next”.
7. Follow the wizard’s instructions.
8. After the nal conguration step, disconnect the LAN cable from the com-
puter and connect the FRITZ!Repeater with your FRITZ!Box (router).
Andere Handbücher für Fritz!Repeater 1200
2
Inhaltsverzeichnis
Sprachen:
Andere Fritz! Repeater Handbücher
Fritz!
Fritz! 1200 AX Bedienungsanleitung
Fritz!
Fritz! AC430 MU-MIMO Kurzanleitung
Fritz!
Fritz! 1750E Kurzanleitung
Fritz!
Fritz! Fritz!Repeater 600 Kurzanleitung
Fritz!
Fritz! 1160 Betriebsanleitung
Fritz!
Fritz! 310 Betriebsanleitung
Fritz!
Fritz! 450E Bedienungsanleitung
Fritz!
Fritz! 310 Bedienungsanleitung
Fritz!
Fritz! 3000 AX Bedienungsanleitung
Fritz!
Fritz! FRITZ!WLAN Repeater 300E Leitfaden
Fritz!
Fritz! 310 Betriebsanleitung
Fritz!
Fritz! Repeater 6000 Bedienungsanleitung
Fritz!
Fritz! FRITZ!WLAN Repeater 300E Bedienungsanleitung
Fritz!
Fritz! DVB-C Betriebsanleitung
Fritz!
Fritz! DVB-C Betriebsanleitung
Fritz!
Fritz! Dect 100 Bedienungsanleitung
Fritz!
Fritz! Powerline 1220E Betriebsanleitung
Fritz!
Fritz! FRITZ!WLAN 310 Betriebsanleitung
Fritz!
Fritz! 450E Betriebsanleitung
Fritz!
Fritz! Fritz!Repeater 600 Kurzanleitung
