FTE Maximal XS-IFT002B Bedienungsanleitung
1. Introduction of IR thermometer
This is a non-contact infrared thermometer suitable for measurement on
the forehead. The thermometer measures the body temperature by
detecting the heat radiation emitted from the forehead. It is easy to use,
reliable and highly accurate. The user can get a precise reading within one
second by touching it. This thermometer is widely used in families, schools
and offices.
1. BASIC SETTINGS
Before each setting, press the measurement trigger to turn
the thermometer on.
2. Press "-" button for 2 seconds to switch between body and object
temperature.
3. Press "+" and "-" keys to check the stored temperatures;
4. press "Set" key for 2 sec. The screen will display "F1", now press
"+""-" buttons to choose between Celsius (C) and Fahrenheit (F);
5. SET ALARM TEMPERATURE
Press "Set" button for 2 sec. The screen will display "F1", press the
"Set" button repeatedly until "F2" is displayed on the screen, then
press the "+" "-" buttons to set the alarm temperature. Default setting
is "37.5 °C";
6. SET ALARM TONE
Press the "Set" key for 2 sec. The screen will display "F1", press "Set"
key repeatedly until "F3" is displayed on the screen, and then press
"+" "-" keys to set the alarm tone, default setting is "on";
7. OFFSET / DEVIATION SETTINGS
Press "Set" button for 2 seconds, the display will show "F1", press
"Set" button several times until "F4" is shown in the display, then
press "+" "-" buttons to set any deviation. Default setting "0.0";
Tip: The offset can be set from -3.0°C~+3.0°C in the normal
measurement distance and environment. For example, the body
temperature in a special environment is measured as 35.9°C, but the
actual body temperature is 36.6°C, in this case, the offset
temperature can be set to "0.7" by "F4").
8. FACTORY RESET
Press the "Set" key for 2 seconds, the screen will display
will show "F1", press the "Set" key several times until "F5" and "dEF"
are shown on the display, now press the "+" key three times and the
"-" key three times to perform a factory reset. All stored values and
settings will be lost.
9. SAVE
If you press the measurement trigger key in the "Settings" menu , all
settings are saved and the menu is closed.
6. Settings
1. Insert the batteries as described in point 7.
2. Press the colored measuring trigger to switch on the thermometer, the
display is then illuminated.
3. check the setting on the display, when measuring the temperature of a
human being, the display must show "Body temp" in the upper right
corner and in the upper right corner you will see either °C or °F for the
measuring unit. If necessary, adjust the setting as described in point 7
"Settings".
4. Hold the thermometer with the infrared sensor facing forwards at a
distance of 1-5 cm in the center of your forehead and then briefly press
the measurement trigger. The thermometer confirms the measurement
with a tone and the display shows the measured body temperature.
5. if the temperature is too low, the screen will show "Lo" and the
background will be illuminated orange, if the temperature is too high, the
screen will show "Hi" and the background of the display will be
illuminated red.
10. Disposal
Scope of delivery
7KHUPRPHWHU pcs.
6SHcLILcDWLRQs
7HPSHUDWXUe range
Measurement accuracy
Measuring distance
Measuring time
%DWWHUies
Memory
Automatic switch off
Measuring unit
Humitity
AP
7HPSHUDWXUefortransport
and storage
Weight
& a &
&（&a&）
&（&a&
and &a&）
FP
6
pcs$$$baWWHULHs（9'&）
for0Hasurements
afterseconds
&)
％a％
aN3D
&a&
&～&
Ambient temperature
4. Thermometer illustration
1U 6WDWXV
2EMHFWWHPS0HPRU\
Object temp Memory
Body temp
meassured7HPSHUDWXU
%RG\WHPS
&HOVLXV&
)DKUHQKHLW)
$ODUPWRQe
%DWWHUy charge
Infrarot Sensor
LCD Display
Down key
Battery compartment
Measurement trigger
Set - Settings
Up key
5. Display illustration
Make sure that the sensor and probe cavity are clean, otherwise
accuracy will be affected.
•
•
Probe cleaning method: Use a cotton swab or soft cloth with
water or alcohol to wipe the housing;
Use a cotton swab or soft cloth with alcohol to gently wipe the
sensor surface or probe cavity.
•Do not use the thermometer until the alcohol has
evaporated.
Instruction manual pcs
Dimension
PP
User Manual
Thermometer
XS-IFT002B
9. Technical data
Jwithout Batteries
Control keys Description of the function
Navigate in the menu and check last
measurments - up
Open Settings
Navigate in the menu and check last
measurments - down
8. Operation
Open the battery cover and take out the used batteries; insert 2 pieces of
AAA batteries according to the positive and negative poles (see the
following picture), close the battery cover.
Read these instructions carefully before using
the thermometer!
•You are required by law to dispose of batteries.
You will find these signs on batteries containing
harmful substances:
Pb = battery contains lead,
Cd = battery contains cadmium,
Hg = battery contains mercuryQuecksilber
•
•
Remove the batteries from the thermometer if it will not be used for an
extended period of time.
Do not disassemble this thermometer yourself. Keep the thermometer
out of the reach of children.
•Do not immerse the thermometer in liquids or expose it to strong
sunlight or extremely low temperatures.
•Strong shocks or impacts acting on the thermometer will damage it.
•
•
•
No special maintenance of this thermometer is required. Please contact
the dealer or manufacturer in case of malfunction.
Do not use the thermometer under the conditions of strong
electromagnetic radiation.
The measurement results are likely to fluctuate due to improper
measurement methods. Please practice appropriate measurements to
improve your skills.
•The measurement results cannot replace the diagnosis of a doctor;
•This infrared thermometer can not be used for medical purposes, but
only as a reference for temperature measurement.
Battery disposal
•Discharged batteries must be disposed of via specially marked
collection containers, special waste collection points or via an electrical
dealer.
11. Important notes
Packaging disposal
•The packaging of your device consists exclusively of recyclable
materials. Please return them to the "Dual System" sorted
accordingly.
Equipment disposal
•At the end of its service life, this product must not be disposed of
with normal household waste, but must be taken to a collection
point for the recycling of electrical and electronic equipment.
•The adjacent symbol on the product, the
Instructions for use or the packaging indicates this.
The materials are recyclable according to their
labeling. By reusing the materials or other forms of
recycling old devices, you are making an important
contribution to protecting our environment. Please
ask your local authority for the responsible disposal
point.
12. Cleaning instructions
Model name: XS-IFT002B
Brand: Ftemaximal
Art.-No.: 0040008, EAN Code: 44260105917177
Hereby, Intelligent Digital Services GmbH declares that the XS-IFT002B
thermometer is in compliance with the Medical Device Regulation (MDR)
(EU) 2017/745, and the EU Directive 2014/30/EU (standards IEC
60601-1-2:2015 and IEC 60601-1-2:2014). The full text of the EU
Declaration of Conformity is available at the following web address:
https://www.ids-digital.de/content_ids/1_fte_maximal/products/
health/0040008/0040008__CE_Konformitaet_DE.pdf
The use of the product is subject to special precautions regarding
electromagnetic compatibility.
Notes on electromagnetic compatibility
•The device is suitable for operation in all environments that are in
listed in these instructions for use, including the home
environment.
•
•
•
The device may only be usable to a limited extent in the presence
of electromagnetic interference. As a result, error messages or a
failure of the display device may occur, for example.
Use of this device in the immediate vicinity of other devices should
be avoided, as this could result in incorrect operation. If use in the
above manner is nevertheless necessary, the thermometer and
other equipment should be observed to make sure that they are
operating properly.
The use of accessories that have not been expressly approved for
use by the manufacturer or the distributor may result in increased
electromagnetic emissions or decreased electromagnetic immunity
of the instrument and may lead to improper operation.
•Non-observance can lead to a reduction in the performance
characteristics of the device
13. declaration of conformity
14. further details
Address of the manufacturer/ distributor:
Intelligent Digital Services GmbH
Maria-Goeppert-Strasse 5
23562 Lübeck
Commercial register entry: Local Court Lübeck HRB 12799
Technical changes and errors reserved.
Subject to changes and printing errors. Status 01/21
Made in China
5
1. Brand new & patented sensor technology ensures high accuracy: ±0.2°C.
2. It only takes 1-2 seconds to measure body temperature;
3. Excellent adjustment to the ambient temperature,
Accurate and reliable.
4. Three background colors for instant indication of temperature range:
green - normal; orange - mild fever; red - high fever;
5. Avoids touching the skin, measures from a distance of 1-5 cm. So you can
also take baby's temperature while sleeping without disturbing it;
6. Momory for the last 32 measurements;
7. large LCD with backlight;
8. Automatic power off.
7. Insert batteries
1. Features
2. Control elements
Dieses Handbuch passt für folgende Modelle
1
Andere FTE Maximal Thermometer Handbücher
