Fujitsu Siemens Computers PRIMERGY Econel 50 Bedienungsanleitung

PRIMERGY Econel 50

Operating manual

Introduction

Important notes

Preparing for use

Operation

Troubleshooting and tips

Technical data

Index

October 2004 edition

Microsoft, MS, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft

Corporation.

VESA and DPMS are trademarks of Video Electronics Standards Association.

PS/2 is a registered trademark of International Business Machines, Inc.

Pentium is a registered trademark of Intel Corporation, USA.

Kensington Lock and MicroSaver are registered trademarks of ACCO World Corporation.

All other trademarks referenced are trademarks or registered trademarks of their respective

owners, whose protected rights are acknowledged.

All rights, including rights of translation, reproduction by printing, copying or similar methods,

in part or in whole, are reserved.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design,

are reserved.

Delivery subject to availability. Right of technical modification reserved.

This manual was produced by

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

A26361-K831-Z502-1-7619

Contents

Your PRIMERGY Econel 50... ............................................................................................................ 1

Features ............................................................................................................................................... 2

Notational conventions......................................................................................................................... 3

Target group......................................................................................................................................... 3

Important notes .................................................................................................................................. 5

Safety ................................................................................................................................................... 5

Energy saving, disposal and recycling ......................................................................................... 5

CE marking................................................................................................................................... 5

FCC Class B Compliance Statement ........................................................................................... 6

Transporting the server ........................................................................................................................ 6

Cleaning the server .............................................................................................................................. 6

Preparing for use................................................................................................................................ 7

Unpacking and checking the delivery................................................................................................... 7

Steps for initial setup............................................................................................................................ 7

Setting up the server ............................................................................................................................ 8

Connect the monitor, mouse and keyboard.......................................................................................... 8

Connecting the monitor ................................................................................................................ 8

Connecting the mouse.................................................................................................................. 9

Connecting a keyboard................................................................................................................. 9

Connecting the server to the mains voltage....................................................................................... 10

Initial switch-on: Software will be installed.......................................................................................... 11

Switching on monitor and server................................................................................................ 11

Configuring the server........................................................................................................................ 13

Configuring the SATA RAID controller ....................................................................................... 13

Configuration with ServerStart.................................................................................................... 13

Configuration without ServerStart...............................................................................................14

Connecting external devices .............................................................................................................. 14

Ports on the server..................................................................................................................... 15

Connecting external devices to the serial port............................................................................ 16

Connecting external devices to the parallel port......................................................................... 16

Connecting external devices to the USB ports........................................................................... 17

Operation........................................................................................................................................... 19

Switching the server on.............................................................................................................. 19

Switching the server off.............................................................................................................. 19

Indicators on the server...................................................................................................................... 20

Keyboard............................................................................................................................................ 21

Important keys and key combinations........................................................................................ 22

Working with floppy disks................................................................................................................... 23

Property and data protection.............................................................................................................. 24

Anti-theft protection and lead-sealing......................................................................................... 24

BIOS setup security functions .................................................................................................... 25

Troubleshooting and tips................................................................................................................. 27

Installing new software....................................................................................................................... 27

Power-on indicator remains unlit after you have switched on your device......................................... 27

The screen stays blank....................................................................................................................... 28

No mouse pointer displayed on the screen........................................................................................29

The floppy disk cannot be read or written........................................................................................... 29

Time and/or date is not correct........................................................................................................... 30

Error messages on the screen............................................................................................................ 30

Tips .................................................................................................................................................... 30

Contents

A26361-K831-Z502-1-7619

Technical data...................................................................................................................................31

Index...................................................................................................................................................33

A26361-K831-Z502-1-7619 1

Your PRIMERGY Econel 50...

...is available with various configuration levels with different hardware and software. In addition, you

can install accessible drives (e.g. DVD drive), hard disk drives and other boards.

This operating manual tells you how to put your server into operation and how to operate it in daily

use. This description applies for all configuration levels. Depending on the configuration level chosen

some of the hardware components described may not be available on your server. Please observe

the notes on your operating system.

Your server has a number of security features to ensure that no unauthorized persons can access

your data. The security functions in the BIOS Setup also allow you to protect your data by means of

passwords. In addition, you can also mechanically lock your server.

ServerStart allows you under some operating systems to easily and quickly install the latest drivers

and operating system extensions with a few mouse clicks.

Further information on this server is provided:

in the "Quick Start Hardware - PRIMERGY Econel 50" poster

in the "Quick Start Software - PRIMERGY ServerView Suite" poster

in the "Warranty" manual

in the "Safety" manual

in the "Helpdesk" poster

in the technical manual for the D1859 system board

in the "D1859 Setup Utility for Econel 50" manual

in the "ServerView Suite" (includes the ServerStart CD, the ServerBooks CD and the ServerSupport

CDs, as well as the print version of the PRIMERGY "ServerView Suite – ServerStart" manual)

in the "LSI SATA Software RAID User’s Guide"

in the "Econel 50 Options Guide"

in the operating manual for the monitor

in your operating system documentation

in the information files (e.g. *.TXT,*.DOC,*.WRI,*.HLP)

Some of the manuals listed can be found on the ServerBooks CD provided with your server.

These manuals can be read and printed with Acrobat Reader, also contained on the CD. A

spare ServerBooks CD may be ordered via the following email address, specifying your

system data: [email protected]

Keep this operating manual together with your device. If you pass on the device to third parties, you

should include this manual.

Your PRIMERGY Econel 50... Features

2A26361-K831-Z502-1-7619

Features

PRIMERGY

Econel 50

Mechanical access protection

Device for "Kensington Lock" X

Eye for padlock or for sealing X

BIOS-based access protection

System passwords X

Activating and deactivating interfaces, including USB X

Boot and write protection for floppy disk and hard disk drives X

Virus protection in the BIOS X

Write protection for flash EPROM X

Casing access monitoring X

System lock, including support for hard disk password X

Software access protection

LAN alarm with heartbeat function X

Virus protection

F-Secure virus scanner X

Administration functions

Desktop management: local administration with ServerView X

Desktop management: remote administration with RemoteView X

Power supply with monitor output -

Power supply with switched monitor output X

System Monitoring X

Temperature monitoring X

Cover monitoring X

System status display X

Notational conventions Your PRIMERGY Econel 50...

A26361-K831-Z502-1-7619 3

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

!CAUTION!

indicates information which is important for your health or for preventing

physical damage.

indicates important information which is required to use the system

properly.

ÊText which follows this symbol describes activities that must be

performed in the order shown.

Italics indicates commands or menu items

"Quotation marks" indicate names of chapters and terms that are being emphasized.

Target group

This operating manual is intended for those responsible for installing the hardware and ensuring that

the system runs smoothly. The operating manual contains all the information required for installing

your PRIMERGY Econel 50.

To understand the different expansion options, you need a knowledge of hardware and data

transmission, as well as basic knowledge of the operating system used.

A26361-K831-Z502-1-7619 5

Important notes

In this chapter you will find information regarding safety which it is essential to take note of when

working with your server.

Safety

!CAUTION!

Pay attention to the information provided in the "Safety" manual and in the following safety

notes.

During installation and before operating the device, please observe the instructions on

environmental conditions in the "Technical data" chapter as well as the instructions in the

"Preparing for use" chapter.

You may only operate the device, if the rated voltage for the device matches the local

mains voltage. Check the rated voltage set for this device (see the "Preparing for use"

chapter).

The main switch and the ON/OFF button do not disconnect the server from the mains

voltage. To completely disconnect the mains voltage, remove the power plug from the

grounded mains outlet.

Remove the power plug before opening the unit.

Caution, components in the system can get very hot.

Energy saving, disposal and recycling

Further information can be found on the CD provided with your computer.

CE marking

The shipped version of this device complies with the requirements of the EEC directives

89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".

Important notes Transporting the server

6A26361-K831-Z502-1-7619

FCC Class B Compliance Statement

The following statement applies to the products covered in this manual, unless otherwise specified

herein. The statement for other products will appear in the accompanying documentation.

NOTE:

This equipment has been tested and found to comply with the limits for a "Class B" digital device,

pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-

Causing Equipment Regulations. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in strict accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused

by unauthorized modifications of this equipment or the substitution or attachment of connecting

cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The

correction of interference caused by such unauthorized modification, substitution or attachment will

be the responsibility of the user.

The use of shielded I/O cables is required when connecting this equipment to any and all optional

peripheral or host devices. Failure to do so may violate FCC rules.

Transporting the server

!CAUTION!

Transport all parts separately in their original packaging or in a packaging which protects

them from knocks and jolts, to the new site. Do not unpack them until all transportation

maneuvers are completed.

Cleaning the server

!CAUTION!

Turn off all power and equipment switches and pull the power plug out of the grounded

mains outlets.

Do not clean any interior parts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic.

Ensure that no liquid enters the system.

Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild

domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and

the mouse.

Inhaltsverzeichnis

Andere Fujitsu Siemens Computers Server Handbücher

Fujitsu Siemens Computers

Fujitsu Siemens Computers Primergy RX330 S1 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY R450 Benutzerhandbuch

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY TX120 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers Primergy Econel 100 Series Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY econel 20 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY 400 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY RX600 S3 Technisches Handbuch

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY Econel 200 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY RX100 S4 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers Primergy TX200 S3 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY BX600 S2 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers SPARC Enterprise M8000 Service-Handbuch

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY ECONEL 10 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY TX200 S4 Betriebsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY TX150 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers Primergy RX200 S2 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers Primergy BX620 S2 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY TX200 S4 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY TX120 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers SCENIC C Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY TX200 S4 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers Primergy TX200 S3 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY TX120 Bedienungsanleitung

Fujitsu Siemens Computers

Fujitsu Siemens Computers PRIMERGY B120 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung