Fujitsu MDG3230UB Bedienungsanleitung
MDG3230UB
OPTICAL DISK DRIVES
MAINTENANCE MANUAL
C156-F047-01EN
C156-F047-01EN
FOR SAFE OPERATION
Handling of This Manual
This manual contains important information for using this product. Read thoroughly before using
the product. Use this product only after thoroughly reading and understanding especially the
section "Important Alert Items" in this manual. Keep this manual handy, and keep it carefully.
FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering
damage to their property. Use the product according to this manual.
This product is designed and manufactured for use in standard applications such as office work,
personal devices and household appliances. This product is not intended for special uses (atomic
controls, aeronautic or space systems, mass transport vehicle operating controls, medical devices for
life support, or weapons firing controls) where particularly high reliability requirements exist,
where the pertinent levels of safety are not guaranteed, or where a failure or operational error could
threaten a life or cause a physical injury (hereafter referred to as "mission-critical" use). Customers
considering the use of these products for mission-critical applications must have safety-assurance
measures in place beforehand. Moreover, they are requested to consult our sales representative
before embarking on such specialized use.
First Edition April 2002
The contents of this manual may be revised without prior notice.
The contents of this manual shall not be disclosed in any way or reproduced in any media without
the express written permission of Fujitsu Limited.
All Rights Reserved, Copyright FUJITSU LIMITED 2002
C156-F047-01EN
Revision History
(1/1)
Edition Date Revised section (*1)
(Added/Deleted/Altered) Details
01 2002-4-25 — —
*1 Section(s) with asterisk (*) refer to the previous edition when those were deleted.
This page is intentionally left blank.
C156-F047-01EN i
Preface
This document describes procedures for maintenance of the MDG3230UB (DynaMO
2300U2), a 3.5-inch magneto-optical diskdrive. The MDG3230UB (referred toas "the
product" hereafter) is provided with the MCJ3230UB 3.5-inch magneto-optical disk drive
unit (referred to as "MO drive" hereafter). The components are built in a case designed
specifically for the product.
Refer to related manuals for operations other than maintenance and for explanation about
an MO drive.
The organization of this manual, related reference manual and conventions for alert
messages follow.
Overview of Manual
This manual consists of the following six chapters, glossary, and abbreviation:
Chapter 1 Overview
This chapter introduces the MDG3230UB MO disk drive. The chapter describes the
system features and outline of maintenance.
Chapter 2 Diagnosis and Maintenance
This chapter describes maintenance conditions, diagnosis methods, failure analysis
procedures, and system updating procedures of the MDG3230UB MO disk drive.
Chapter 3 Troubleshooting
This chapter describes troubleshooting of a system connected to a Macintosh G3 and
Windows computer.
Chapter 4 Returning Repaired Unit
This section describes procedures for unpacking, packing, transporting, and storing the
MDG3230UB MO disk drive.
Chapter 5 Cleaning
Preface
ii C156-F047-01EN
CONVENTIONS USED IN THIS MANUAL
Conventions for Alert Messages
This manual uses the following conventions to show the alert messages. An alert message
consists of an alert signal and alert statements. The alert signal consists of an alert symbol
and a signal word or just a signal word.
The following are the alert signals and their meanings:
This indicates a hazardous situation likely to result in
serious personal injury if the user does not perform the
procedure correctly.
This indicates a hazardous situation could result in serious
personal injury if the user does not perform the procedure
correctly.
This indicates a hazardous situation could result in minor
or moderate personal injury if the user does not perform
the procedure correctly. This alert signal also indicates
that damages to the product or other property, may occur if
the user does not perform the product correctly.
This indicates information that could help the user use the
product more efficiently.
In the text, the alert signal is centered, followed below by the indented message. A wider
line space precedes and follows the alert message to show where the alert message begins
and ends. The following is an example:
Preface
C156-F047-01EN iii
(Example)
IMPORTANT
Fujitsu issues a Change Request/Notification regarding post-factory-shipment revision
number changes. When the user changes the version number, the revision-number label
should be updated as described above after the change is applied.The main alert messages
in the text are also listed in the “Important Alert Items.”
Attention
Please forward any comments you may have regarding this manual.
To make this manual easier for users to understand, opinions from readers are needed.
Please write your opinions or requests on the Comment at the back of this manual and
forward it to the address described in the sheet.
This page is intentionally left blank.
C156-F047-01EN v
Important Alert Items
Important Alert Messages
The important alert messages in this manual are as follows:
A hazardous situation could result in minor or moderate personal injury if the
user does not perform the procedure correctly. Also, damage to the product
or other property, may occur if the user does not perform the procedure
correctly.
Task Alert message Page
Device Damage Be sure to use the dedicated head cleaner described above. 5-1
Device damage Use the cleaner and cleaning cloth specified in Table 5.2. If other
than the specified items is used, disk media surface may be
damaged.
5-5
Device damage Do not use this cleaning kit for the floppy disk or the optical disk
cartridge used for other optical disk drive. 5-5
Disk media damage Clean the cartridge at clean place. Put a disposable groves at
cleaning so that the fingerprint does not put on the disk media
(recommendation).
5-5
Device Damage When setting the optical disk cartridge in the setting case, neither
apply strong shock nor push it forcibly. 5-6
Damage for data medium In case of contact, immediately flush eyes with water. 5-7
This page is intentionally left blank.
Inhaltsverzeichnis
Andere Fujitsu CD/CDR-Laufwerk Handbücher
Fujitsu
Fujitsu Modular Optical Drive Bedienungsanleitung
Fujitsu
Fujitsu MCM3064AP Bedienungsanleitung
Fujitsu
Fujitsu MCE3064SS Bedienungsanleitung
Fujitsu
Fujitsu MCJ3230SS Bedienungsanleitung
Fujitsu
Fujitsu MCM3064SS Bedienungsanleitung
Fujitsu
Fujitsu MBA3300 NP SERIES Bedienungsanleitung
Fujitsu
Fujitsu MCJ3230AP Bedienungsanleitung
Fujitsu
Fujitsu MCE3064AP Bedienungsanleitung
Beliebte CD/CDR-Laufwerk Handbücher anderer Marken
SmartDisk
SmartDisk Firewire CD-R/W Bedienungsanleitung
Axis
Axis CD-ROM SERVER Bedienungsanleitung
LG
LG CRD-8322B Bedienungsanleitung
Memorex
Memorex 32023234 - 52x32x52x External USB2.0 CD... Montageanleitung
Yamaha
Yamaha CD Recordable/Rewritable Drive CRW3200 Bedienungsanleitung
Sony
Sony CRX230AE Bedienungsanleitung
