Fujitsu DYNA MO Bedienungsanleitung
USB User’s Guide
Copyright ©2000 Fujitsu Computer Products of America, Inc.
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited.
DynaMO is a registered trademark of Fujitsu Computer Products of America, Inc.
All other trademarks herein are the property of their respective owners.
Getting Started
For SCSI operation, refer to the SCSI User's Guide on the
DynaMO CD.
Precision. We’ve designed the DynaMO SF+USB for precision
and durability — ideal for backing up and securing your most
critical work.
Compatibility. The DynaMO SF+USB is fully compatible with
128-, 230-, 540- and 640-megabyte MO disks. In addition, you
can use Direct OverWrite (OW) disks, which enable even faster
data processing.
Minimum System Requirements.
PC
■Intel Pentium processor or equivalent and 16MB memory
■USB version 1.1
■Windows 98 or higher; Windows 2000
Mac
■Any USB enabled Macintosh with USB version 1.1 or 1.1
upgrade
■OS 8.6 or higher
Support. Before using your DynaMO SF+USB, check that all the
components in the packing list are included in the box. If any
components are missing, please contact the place of purchase.
This guide will help you set-up and use your DynaMO drive
successfully. If you need further assistance, call our customer
service center at 1-800-626-4686.
1
Installing your DynaMO Software
PC
1 Insert the DynaMO CD into your CD-ROM drive and
double click on the CD-ROM icon.
2 Double click on “setup.exe”.
3 Follow the instructions to install your software.
4 Remove the CD.
Mac
1 Insert the Disk Drive Tune Up CD into your CD-ROM drive.
2 Double click on “Disk Drive Tune Up SE Installer”.
3 Follow the instructions to install your software.
4 Remove the CD.
DynaMO Companion Software CD
The DynaMO Companion Software CD contains a variety of
useful applications to further enhance your DynaMO experience.
You are responsible for the installation, management and
operation of these applications. Fujitsu Computer Products of
America makes no representations or warranties for the software
included on the CD. All warranties, representations or support are
provided by third parties and are described in the end user license
agreement(s) included on the CD.
Install the DynaMO software before connecting hardware.
DynaMO CD
CONNECTING HARDWARE 2
Connecting your DynaMO Hardware
4 Plug the USB cable into your computer.
Your DynaMO SF+USB is now ready to use.
1 Connect USB cable to either port on your DynaMO drive.
2 Connect AC adapter
AC ADAPTER
POWER ON SWITCH
POWER ON
INDICATOR
POWER ON
SWITCH
3 Power on the DynaMO drive
Removable disks are formatted differently for different operating
systems. The MO disk included in this package is not formatted.
You must format the MO disk before using.
3 FORMATTING MO DISKS
Formatting your MO Disks
Warning: Formatting, reformatting, or changing partitions on an MO disk
will erase all data on the disk. Back up data if necessary before
proceeding.
PC
1 Insert an MO disk into the DynaMO drive.
2 From “My Computer”, right click the removable disk icon
and select “format”.
3 Format the MO disk.
4 When formatting is complete, the MO disk is ready to use.
Mac
1 Insert an MO disk into the DynaMO drive.
2 Initialize the disk.
3 Double click on “Disk Drive Tune Up SE” icon.
4 Ensure that the USB bus is selected.
5 Select the Fujitsu drive from the numerical list of USB
devices.
6 Select partition options, if desired, or use default options and
click “install”.
7 When formatting is complete, the MO disk is ready to use.
For optimum portability and usage of your DynaMO drive and disks, it is
recommended to use the Disk Driver Tune Up drivers provided.
USING DYNAMO 4
Using your MO Disks
Inserting an MO Disk
Gently insert the MO disk with the label side up, as shown
above, until the disk clicks into place. Never force the disk into
the drive or insert the MO disk upside down as this may damage
Ejecting an MO
Emergency Eject
If the MO disk cannot be ejected as described above, or appears to
be jammed in the drive, the disk can be ejected using Emergency
Eject.
1 Turn off the DynaMO drive.
2 Straighten one end of a large paper clip.
3 Insert the straightened end of the paper clip into the hole just
below the shutter door, and push gently but firmly until the
MO disk is ejected.
Warning: Never transport your DynaMO with a disk inside. Eject the
MO disk before disconnecting the DynaMO from your system. Never
eject an MO disk while the busy indicator light is on. Damage to, or
loss of, data may result.
PC User Click the removable disk
icon with the right mouse
button and select “Eject”
from the pull-down menu.
Press the eject button of
the DynaMO drive.
Drag and drop the MO disk
icon into the trash can.
Mac User
EJECT FROM SOFTWARE MANUAL EJECT
EJECT BUTTON/
EMERGENCY EJECT
BUSY INDICATOR
5 USING DYNAMO
WRITE PROTECT
RITE ENABLE
WR
WR
Write protection
Your MO disk has Write Protect capability. Enabling the write
protection on the MO disk prevents data from being lost or
altered accidentally. Move switch up for Write Enable or down for
Write Protect.
Cleaning the MO disk
In normal office environments, cleaning the MO disk is not
required. In some cases, however, dust may build up on the
surface of the disk and cleaning may be required. Please contact
your place of purchase for information on the MO disk cleaning
kit.
Cleaning your DynaMO SF+USB drive
In normal office environments, cleaning your DynaMO drive is
not required. In some cases, however, dust may build up on the
objective lens of the drive and cleaning may be necessary. To clean
the objective lens you will need an optical lens cleaning kit (part
number CA90002-C980). Please contact your place of purchase
for information on where to purchase a lens cleaning kit.
Use care when handling your MO disk as dirt, fingerprints, and
moisture may degrade the disk performance.
USING DYNAMO 6
DIP Switch Settings
The DIP switch settings on your DynaMO are the recommended
settings for the USB configuration.
DP1 – Device type mode (Default Setting:off)
This switch configures the DynaMO as either an optical storage
device or a removable hard disk drive device.
DP2 – Automatic spindle stop mode (Default Setting: on)
When this setting is on, the drive automatically stops the disk to
save power when not in use.
DP3 – Write cache mode (Default Setting: on)
The DynaMO has 2 MB internal cache. Best write performance
can be achieved by the default setting (on). If you use your
DynaMO drive in harsh areas, or areas with large amounts of
dust, this switch can be set to (off).
DP4 – SCSI Terminator mode (Default Setting: on)
For USB, this switch should always be on.
For Windows® 2000, you must set the SCSI ID setting to zero.
Dos and Don’ts
■ Never turn your DynaMO over while in use.
■ Always ensure that the busy indicator light is off before turning
the power off.
■ Remove the MO disk before transporting your DynaMO.
■ Never force a disk into the drive or insert an MO disk upside
down as this may damage the drive.
■ Since a floppy disk is about the same size as an MO disk, be
careful to never insert a floppy disk into the DynaMO drive.
■ Use only ISO-compliant or GIGAMO 3.5-inch MO disks.
■ Do not use your DynaMO in areas where dust, dirt, extreme
temperatures or moisture is present.
■ Do not connect any additional devices to the DynaMO drive.
■ Never connect or disconnect the USB cable from the back of
the DynaMO while the drive power is on.
DIP SWITCH
SETTINGS 1
SCSI ID SETTING
7
Q & A
Q Can I create multiple partitions on an MO disk?
A PC
No. Windows 98 will allow only one partition on an MO disk.
Mac
Yes. Disk Drive Tune Up SE allows up to 15 partitions on a single
disk. See the electronic Disk Drive Tune Up SE manual for details.
Q Can I use my DynaMO SF+USB with Windows 95 OSR2.1?
A While the DynaMO drive may function using Windows 95
OSR2.1, you may encounter problems and not achieve optimum
performance.
Q Can I use my DynaMO SF+USB with my Mac running OS 8.5?
A While the DynaMO drive may function using OS 8.5, you may
encounter problems and not achieve optimum performance. We
recommend that you upgrade to OS 8.6.
Q Is the DynaMO SF+USB hot-pluggable?
A Yes. You may plug the DynaMO in at any time without having to
reboot your system. Be sure to hot-plug at the USB port on your
computer only and not from the back of the DynaMO.
Q Is the DynaMO SF+USB hot-unpluggable?
A Yes, but make sure to eject your MO disk from the DynaMO
before unplugging the drive.
Q If I power off and on my DynaMO while it’s connected to my
computer, will the system still recognize the drive?
A PC
Yes. However some PCs will not recognize the drive unless a disk
is inserted. If you encounter this, insert an MO disk and power
the DynaMO off then on again.
Mac
Yes.
Q Can I connect my DynaMO to a USB hub?
A We recommend that you connect the DynaMO SF+USB to a
USB port on your computer only.
PRODUCT TYPE Optical Disk Drive
MODEL NUMBER MDG3130SS, MDG3064SS
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) this device must accept
any interference received, including interference that may cause undesired operation.
RESPONSIBLE PARTY
NAME Fujitsu Computer Products of America, Inc.
ADDRESS 2904 Orchard Parkway, San Jose, CA 95134-2009
Telephone: (408) 432-6333
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a par
ticular installation. If this e
q
ui
p
ment does cause ha
r
mf
u
l in
te
rf
e
r
e
n
ce
to
r
ad
i
o
o
r
te
l
e
vision rece
p
tion
,
whi
c
h
ca
n
be
determined by tur
nin
g
the equipment off and on
,
y
to co
r
followin
g
measures: 1)Reorient or relocate the receivin
g
antenna
,
,
dealer or an experienced radio
/
TV technician for help
.
Technical Specifications
This pr
o
du
ct is a class 1 laser
product
to EN 6082
5
/IEC 82
5
.Th
e
label sho
wn to the ri
g
ht is affixe
d
to
the product.
USING DYNAMO 8
FCC Declaration of
C
l
ass
1 L
ase
r
128MB 230MB 540MB 640MB 1.3GB
90mm 3.5"MO
ISO 10090 ISO 13963 ISO 15041 ISO 15041 Gigamo
USB
1.1 MB/s 1.3-2.1 MB/s 2.3-3.9MB/s 3.4-5.9.MB/s
12 Mbits/s
23ms (typ.)
8.3ms
3,600rpm/4300rpm 3000rpm
2MB
100-120VAC.60Hz
45mm x 126mm x 215mm
4.9W 5.3W
1.5W
5 – 35∞C
0 – 50∞C
max. 3000m
10 – 85%
D
ata
t
r
a
n
s
f
er
r
ate
Disk capacity
Disk format
A
A
verage latency time
A
A
Rotational s
p
ee
d
Buffer
Input power
Dimensions
Power
requirements
Temperature
Altitude operating
Humidity
Acoustics
non-operating
operating
idle
operating
Driv
e
23dBA
Inhaltsverzeichnis
