Fujitsu D1031 Bedienungsanleitung
SYSTEMBAUGRUPPE D1031
SYSTEMBAUGRUPPE D1031SYSTEMBAUGRUPPE D1031
SYSTEMBAUGRUPPE D1031
SYSTEM BOARD D1031
SYSTEM BOARD D1031SYSTEM BOARD D1031
SYSTEM BOARD D1031
TECHNISCHES HANDBUCH
TECHNISCHES HANDBUCHTECHNISCHES HANDBUCH
TECHNISCHES HANDBUCH
TECHNICAL MANUAL
TECHNICAL MANUALTECHNICAL MANUAL
TECHNICAL MANUAL
Sie haben ...
... technische Fragen oder Probleme?
Wenden Sie sich bitte an:
• einen unserer Servicepartne
r
• Ihren zuständigen Vertriebspartne
r
• Ihre Verkaufsstelle
Die Adressen Ihrer Servicepartner finden Sie im Garantieheft oder im Service-Adressenheft.
Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet:
http://www.fujitsu-siemens.com
Is there ...
... any technical problem or other
question you need clarified?
Please contact:
• one of our service partners
• your sales partne
r
• your sales outlet
The addresses of your service partners are contained in the guarantee booklet or in the service
address booklet.
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.: A26361-D1031-Z120-1-7419
A26361-D1031-Z120-1-7419A26361-D1031-Z120-1-7419
A26361-D1031-Z120-1-7419
Printed in the Federal Republic of Germany
AG 0100 01/00
A26361-D1031-Z120-1-7419
SYSTEMBAUGRUPPE D1031
SYSTEM BOARD D1031 TECHNISCHES HANDBUCH
TECHNICAL MANUAL
Systembaugruppe
D1031
System board D1031
Technisches Handbuch
Technical Manual
Deutsch
En
g
lish
Ausgabe Januar 2000
January 2000 edition
Copyright ãFujitsu Siemens Computers GmbH 2000
Intel und Pentium sind eingetragene Warenzeichen und MMX und OverDrive sind
Warenzeichen der Intel Corporation, USA.
Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft
Corporation.
PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines,
Inc.
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen
der jeweiligen Inhaber und werden als geschützt anerkannt.
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Intel and Pentium are registered trademarks and MMX and OverDrive are trademarks of Intel
Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
A26361-D1031-Z120-10-7419
Contents
Introduction........................................................................................................................................1
Notational conventions ..............................................................................................................1
Important notes..........................................................................................................................1
Information on boards................................................................................................................2
Features............................................................................................................................................3
Interfaces and connectors .........................................................................................................4
Possible screen resolution.........................................................................................................5
Interrupt table ............................................................................................................................5
SCSI bus termination.................................................................................................................6
Settings on the system board ............................................................................................................7
Recovering System BIOS - switch 1..........................................................................................8
Write protection for System BIOS - switch 3..............................................................................8
Write protection for floppy disk drive - switch 4..........................................................................8
Clock speed - switch 5, 6, 7 and 8.............................................................................................9
Add-on modules..............................................................................................................................10
Upgrading main memory..........................................................................................................11
Replacing the processor..........................................................................................................11
Replacing the lithium battery....................................................................................................13
Glossary..........................................................................................................................................14
A26361-D1031-Z120-10-7419 English - 1
Introduction
i
This system board is available in different configuration levels. Depending on the
hardware configuration of your device, it may be that you cannot find several options in
your version of the system board, even though they are described.
You may find further information in the description "BIOS Setup".
Further information to drivers is provided in the readme files on hard disk or on the supplied drivers
diskettes or on the "Drivers & Utilities" or "ServerStart" CD.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!Pay particular attention to texts marked with this symbol. Failure to observe this
warning endangers your life, destroys the system, or may lead to loss of data.
i
Supplementary information, remarks and tips follow this symbol.
Ê Texts which follow this symbol describe activities that must be performed in the order shown.
ËThis symbol means that you must enter a blank space at this point.
Ú
ÚÚ
ÚThis symbol means that you must press the Enter key.
Texts in this typeface are screen outputs.
Texts in this bold typeface are the entries you make via the keyboard.
Texts in italics indicate commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being emphasized.
Important notes
Store this manual close to the device. If you pass on the device to third parties, you should also
pass on this manual.
!Be sure to read this page carefully and note the information before you open the device.
You cannot access the components of the system board without first opening the device.
How to dismantle and reassemble the device is described in the Operating Manual
accompanying the device.
Please note the information provided in the chapter "Safety" in the Operating Manual of
the device.
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the chapter „Add-on modules“-„Replacing the
lithium battery“.
Introduction
2 - English A26361-D1031-Z120-10-7419
The shipped version of this board complies with the requirements of the EEC
directive 89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installing the board, refer to the specific installation information in the
Operating Manual or Technical Manual of the receiving device.
Connecting cables for peripherals must be adequately insulated to avoid interference.
!Components can become very hot during operation. Make sure you do not touch
components when making extensions to the system board. There is a danger of burns!
i
The warranty is invalidated if the device is damaged during the installation or
replacement of system expansions. Information on which system expansions you can
use is available from your sales outlet or the customer service center.
Information on boards
To prevent damage to the system board or the components and conductors on it, please take great
care when you insert or remove boards. Take care above all to ensure that extension boards are
slotted in straight without damaging components or conductors on the system board, or any other
components, for example EMI spring contacts.
Be especially careful with the locking mechanisms (catches, centering pins etc.) when you replace
the system board or components on it, for example memory modules or processors.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the
label shown.
When you handle boards fitted with ESDs, you must observe the following
points under all circumstances:
• You must always discharge yourself (e.g. by touching a grounded
object) before working.
• The equipment and tools you use must be free of static charges.
• Pull out the power plug before inserting or pulling out boards containing
ESDs.
• Always hold boards with ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.
Inhaltsverzeichnis
Andere Fujitsu Hauptplatine Handbücher
Fujitsu
Fujitsu FLASH-CAN-48P Bedienungsanleitung
Fujitsu
Fujitsu D1919 Bedienungsanleitung
Fujitsu
Fujitsu D1567 Bedienungsanleitung
Fujitsu
Fujitsu D3598 Bedienungsanleitung
Fujitsu
Fujitsu CPU369-Module Bedienerhandbuch
Fujitsu
Fujitsu D2109 Bedienungsanleitung
Fujitsu
Fujitsu GA-8SGXL P4 Titan DDR Bedienungsanleitung
Fujitsu
Fujitsu D2671 Bedienungsanleitung
Fujitsu
Fujitsu P4 Titan-DDR GA-8STXC Bedienungsanleitung
Fujitsu
Fujitsu D2679 Bedienungsanleitung
Fujitsu
Fujitsu D3034 Bedienungsanleitung
Fujitsu
Fujitsu D2779 Bedienungsanleitung
Fujitsu
Fujitsu SK-MB91590-208M04 Bedienungsanleitung
Fujitsu
Fujitsu F2MC-8FX Series Bedienungsanleitung
Fujitsu
Fujitsu D2811 Bedienungsanleitung
Fujitsu
Fujitsu D3049 Bedienungsanleitung
Fujitsu
Fujitsu MB39C026 Bedienungsanleitung
Fujitsu
Fujitsu D3220 Bedienungsanleitung
Fujitsu
Fujitsu MB96300 series Bedienungsanleitung
Fujitsu
Fujitsu D2608 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
