Fujitsu DL Series Montageanleitung

Rev.01: April 12, 2010

Fujitsu Dot Matrix Printer

DL Series

Printer Driver Installation Guide

- Windows 7

- Windows Server 2008 R2

IMPORTANT NOTE TO USERS

For Windows 7 / Windows Server 2008 R2, install the printer driver before

connecting the printer to your personal computer.

Either of the following messages is displayed in the setup program: Printer is

ready for installation.or Printer driver installation has been completed.After

the message is displayed, connect the printer to your PC.

If the printer is already connected to your PC before the printer driver

installation, see the section Troubleshooting in Setup in this manual.

Do not use this printer driver in other printers (other than Fujitsu DL7600).

Do not use Fujitsu DL7600 printer with any printer driver from other

manufacturers.

When printing in Windows 7 / Windows Server 2008 R2, set the printer

function setting to its default factory configurations.

If any other setting is used, the desired printing results will not be provided.

After inserting the Setup Disk into your PC’s CD-ROM drive, the FUJITSU

DL Series Software setup window is displayed. If your operating system is

Windows 7 / Windows Server 2008 R2, click the OK button. For any other

Windows operating system, click the EXIT button.

For some versions of Windows 7 / Windows Server 2008 R2, the installation

procedure or display contents may vary. If so, follow the recommended

onscreen instructions.

For setup, always log on using an administrator account.

During setup, in the User Account Control dialog box, you may be asked, Do

you want to allow the following program from an unknown publisher to make

changes to this computer ? Select Yes.

When using 64-bit Windows 7, follow the above procedure also.

If a different-version printer driver has been installed, delete it first and

proceed with set up.

The contents of this manual are subject to change without notice for its

improvement.

Fujitsu Isotec bears no responsibility for any infringement of any third-party’s

patent right or any other rights resulted from the usage of data provided in this

document.

2 / 24

3 / 24

ABBREVIATIONS USED IN THIS MANUAL

Windows® 7 Ultimate

Windows® 7 Ultimate x64 Edition

Windows® 7 Enterprise

Windows® 7 Enterprise x64 Edition

Windows® 7 Professional

Windows® 7 Professional x64 Edition

Windows® 7 Home Premium

Windows® 7 Home Premium x64 Edition

Windows® 7 Starter

referred to as Windows 7

Microsoft® Windows Server® 2008 R2 Enterprise

Microsoft® Windows Server® 2008 R2 Standard referred to as

Windows Server 2008 R2

ABOUT THE TRADEMARK

Company names and product names mentioned above are registered trademarks

or trademarks of each company.

INSTALLING

PRINTER DRIVER

In this section, Windows 7 Professional is used as an

example of how to install the printer driver on a PC using

Windows 7 / Windows Server 2008 R2 operating system.

In the following procedure, the Fujitsu DL7600 printer

driver is set up.

When using another printer or another printer driver,

change it to your current printer or printer driver name to

follow the procedure.

Setup using Plug & Play

1. Log on as an administrator of the computer.

2. Insert the Setup Disk into your PC’s CD-ROM drive.

The Auto Play window will be displayed.

Click Run DLSELECT.EXE.

If the Auto Play window is not displayed, use Explorer

or another application to open CD-ROM.

and double click the DLSELECT.EXE file.

3. The FUJITSU DL Series Software Setup window is

displayed.

From the printer driver list, select DL7600 and click the

OK button.

Note:

When using the latest printer driver downloaded

from our web site, double click the executable

program (a file whose extension is EXE) in the

downloaded driver data folder.

4 / 24

4. When the dialog box, Do you want to allow the

following program from an unknown publisher

to make changes to this computer ? is displayed,

click Yes.

5. The FUJITSU DL Series Printer Driver Package

window is displayed.

Click the OK button.

6. Select a printer driver to add will be displayed.

To use a network port, check mark the option “Use a

network port.”

Note:

Depending on the printer driver selected in the

FUJITSU DL Series Software Setup Window,

the window composition may vary. In this manual,

Fujitsu DL7600 has been used as reference.

5 / 24

7. Follow the display menu and select a printer driver

to install.

Then, click the OK button.

Note:

▪If selecting Use a network port, go to step a.

▪If you do not wish to install the printer driver,

select Cancel. When the procedure is ended

without any printer driver installation, double click

each executable program of FUJITSU DL Series

Software Setup or FUJITSU DL Series Printer

Driver Package again or install the printer driver

through Setup method using Add a Printer Wizard.

▪About “Use a network port”…

(1) For creation or setup method of a network

port, read the manual or setup guide of an

optional LAN board or LAN adapter or see

the Help topic in Windows 7 or Windows

Server 2008 R2.

(2) When using a network port created through

an optional LAN board or LAN adapter or

using Windows Standard TCP/IP port, select

this item.

(3) Do not select this item when using a parallel

port or a USB port.

8. In Windows Security dialog box the dialog, Windows

can’t verify the publisher of this driver software is

displayed.

Select Install this driver software anyway.

9. A file copy starts.

Note:

Wait until the message Printer driver is ready for

installation.

6 / 24

10. Once the message, Printer driver is ready for

installation, is displayed - Click the OK button.

11. Connect the printer to your PC and turn on the

printer power.

12. Installing device driver software is displayed in the

taskbar notification area.

After a while, the message Fujitsu DL7600 Device

driver software installed successfully is displayed.

Note:

When a USB interface is used for connection – the

message Your device is ready to use is displayed

instead.

13. Select Start, and then select Devices and Printers.

7 / 24

14. Make sure that the printer driver icon is added to

Printers and Faxes section.

15. Restart Windows.

This completes the printer driver setup.

When Use a network port is selected:

a. The following message is displayed: Use a network

port is selected.

Read the instructions carefully and click the OK

button.

8 / 24

b. In the Windows Security dialog box, the message,

Windows can't verify the publisher of this driver

software is displayed, select Install this driver

software anyway.

c. A file copy starts.

Note:

Wait until the window of Procedure D. is displayed.

d. The Add Printer Wizard is displayed.

Select Add a local printer.

e. Specify a port to connect the printer and click Next.

9 / 24

Note:

If a port is not available, for example, in cases where

a network port to use is not present in the list of Use

an existing port, select a temporary port such as

LPT1:(Printer Port).

f. The dialog Install the printer driver is displayed.

From Manufacturer, select FUJITSU. From the list of

Printers, choose a model to use and click the Next

button.

g. The dialog Type a printer name is displayed.

Type the printer name and click the Next button.

Note:

When changing the printer name, key-in the

changed printer name.

h. A file copy starts.

Note:

Wait until the window of Procedure I. or Procedure

J. is displayed.

i. The Printer Sharing Window is displayed.

Select according to your computer environment and

click the Next button.

Note:

The Printer Sharing Window may not be displayed

for some computer environments.

When the Printer Sharing Window is displayed,

select according to your computer environment.

(1) Not sharing : Select Do not share this printer.

(2) Sharing : Select Share this printer so

that others on your network

can find and use it and enter

Share name, Location, and

Comment.

j. Make sure that the message, You've successfully

added Fujitsu DL7600, is displayed, and click the

Finish button to terminate the wizard.

Note:

▪When multiple printer drivers have been installed,

Set as the default printer is displayed. Select as

needed.

▪In this window, the Print a test page button is

displayed. If required print a test page.

▪Notes on test page printing…

(1) When a temporary port is selected in

Procedure E., do not print any test page.

(2) Make sure that the printer is online when

printing test pages.

(3) Test pages are printed according to the printer

driver settings at that point. In the printer

driver default, Paper Source: Automatically

Select and Paper Size: Letter are configured.

Print test pages with Letter-sized cut sheet.

(4) To use a non-default feed method or paper

size, change the setting first and then print

test pages.

10 / 24

Inhaltsverzeichnis

Andere Fujitsu Drucker Handbücher

Fujitsu

Fujitsu FTP-638MCL101 Bedienungsanleitung

Fujitsu

Fujitsu FTP-638WSL Bedienungsanleitung

Fujitsu

Fujitsu FTP-641MCL351 Bedienungsanleitung

Fujitsu

Fujitsu FTP-639MCL354 Betriebsanleitung

Fujitsu

Fujitsu DL6600PRO - DL 6600 Pro B/W Dot-matrix... Bedienungsanleitung

Fujitsu

Fujitsu DL-3750+ Bedienungsanleitung

Fujitsu

Fujitsu DL6400PRO Bedienungsanleitung

Fujitsu

Fujitsu fi-4x20 SERIES Konfigurationshandbuch

Fujitsu

Fujitsu FTP-627 Series Bedienungsanleitung

Fujitsu

Fujitsu DL4400 Bedienungsanleitung

Fujitsu

Fujitsu fi-7480 Bedienungsanleitung

Fujitsu

Fujitsu DL7400Pro Bedienungsanleitung

Fujitsu

Fujitsu fi-4530C Konfigurationshandbuch

Fujitsu

Fujitsu Impact 3650 Bedienungsanleitung

Fujitsu

Fujitsu FTP-631MCL301 Bedienungsanleitung

Fujitsu

Fujitsu DL7600Pro Bedienungsanleitung

Fujitsu

Fujitsu DX2300 Bedienungsanleitung

Fujitsu

Fujitsu N7100E Bedienungsanleitung

Fujitsu

Fujitsu DL3300 Bedienungsanleitung

Fujitsu

Fujitsu Breeze 100 Bedienungsanleitung

Fujitsu

Fujitsu FTP-628MCL053 Bedienungsanleitung

Fujitsu

Fujitsu FTP-628WSL210A Bedienungsanleitung

Fujitsu

Fujitsu fi-453PR Handbuch

Fujitsu

Fujitsu DL-3800 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung