Fujitsu FP-1000 Bedienungsanleitung
FP-1000
Thermal Printer User’s Manual
Standard Model FP-1000
Built-in Power Supply Model FP-1000PW
Fujitsu Isotec Limited.
KA02066-Y900-04
All the company names and product names mentioned in this document are the
trademarks or registered trademarks of their respective companies.
This document is subject to change without notice.
Unauthorized reproduction or copying of this document, whether in part or in
whole is prohibited.
Please be aware that we cannot be held liable in any way for the effects of
operating this product in accordance with this document or damages caused due to
negligence.
Although we have made every effort to ensure accuracy in creating this document,
if you find any discrepancies such as unclear locations or wrong/missing
descriptions, please make inquiries with the sales company where you purchased
the product.
- i -
How to Use This Product Safely
Using This Document
This document contains important information for using the product safely.
Carefully read and understand this manual before using the product.
After reading this manual, store it with care at a place where it can be found at
any time, such as near the product.
Using Recycled Parts
In consideration of the environment, some recycled parts have been used in
this product.
Warning
This is a class A product of Electromagnetic Interference (EMI)
standard. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.
For United States Users
Federal Communications Commission
Radio Frequency Interference Statement
Warning
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
- ii -
在中国使用时的注意
警告
此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户
对干扰采取切实可行的措施。
电子信息产品安全使用期限
这标记是按照 2006 年 2 月 28 日公布的[电子信息产品污染控制管理办法]
以及 SJ/T11364-2006[电子信息产品污染控制标识要求]在中国销售的电
子信息产品的环保使用期限。如遵守关于这产品的安全或使用上的注意，
在这期限内(从生产日期起算)不会因产品中的有害物质漏到外部、或发生
突然变异，而引起环境污染和对人体或财产的重大影响。
产品中有毒有害物质或元素的名称及含量
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
机械单元 × ○ ○ ○ ○ ○
电源适配器 × ○ ○ ○ ○ ○
印刷电路组件 PCA* × ○ ○ ○ ○ ○
*：* 印刷电路组件包括所有印刷电路板 (PCB) 及其各自的离散组件、IC 和连接器。
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363－2006规定的限量
要求以下。
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363－2006规定的
限量要求。
Notice
The contents of this manual may be revised without prior notice.
No part of this manual may be reproduced in any form without permission.
All Rights Reserved, Copyright2013 Fujitsu Isotec Limited
- iii -
Safety Precautions
Warning Marks
This document uses the following warning marks in order to ensure safe
and correct use of the product and to prevent any harm or damage to you or
to others.
Warning Caution
Used for instructions intended
to alert the user to the risk of
death or severe injury should
the product be used improperly
without paying attention to this
mark.
Used for instructions intended to
alert the user to the risk of injury
or material damage should the
product be used improperly without
paying attention to this mark.
Graphic Symbols Used and their Meanings, with Examples
The symbol alerts the user to warnings and
cautions. The specific meaning of the symbol is
determined by the design contained within the
triangle (in this example, caution for electric
shock).
The symbol alerts the user to actions that must
never be carried out (prohibited action). The
specific action that is prohibited is indicated inside
or to the side of the circle (in this example,
disassembly is prohibited).
The symbol alerts the user to actions that
must necessarily be performed. The specific action
is indicated by the design contained within the
circle (in this example, the power plug must be
removed from the outlet).
Warning
Only the AC adapter specified by Fujitsu Isotec may be used
with this printer. Using any other AC adapter carries the risk
of fire and electric shock.
When connecting the drawer kick cable, do not use any
method not specified in the instruction manual. This may
result in fire or electric shock.
Do not place metals or vessels containing water, such as a
vase, flower pot or cup on the top of, or near the product, or
pour water on it.
This may result in electric shock or fire.
- iv -
Do not place this product in places with high humidity, dust,
smoke or bad ventilation, or in places with fire hazards. This
may result in electric shock or fire.
When connecting the AC adapter, do not use voltages
outside the range indicated on the adapter. In addition, avoid
using multiple cords connected to one outlet. This may
result in electric shock or fire.
Do not insert or remove the power plug using wet hands.
This may result in electric shock or fire.
Do not scratch or tamper with the power cable.
Placing heavy objects on the power cable, pulling it, bending
it forcibly, twisting it, or tampering with it can damage the
power cable and result in fire or electric shock. Do not insert
or drop foreign matter, such as metals or combustible
materials, into the product from its aperture. This may result
in fire or electric shock.
- v -
- vi -
In case of emergency involving heat, smoke or acrid fumes
occurring, immediately turn off the power switch, and
remove the power plug from the outlet. Request the sales
company (or maintenance service center) for repair after
confirming the smoke has gone. Users must under no
circumstances whatsoever try to repair the product due to
the dangers involved. Using the product in the abnormal
state without taking any corrective action may result in fire
or electric shock.
If any foreign matter (such as a piece of metal or water or
other liquids) enters the product, immediately turn off the
power switch and remove the power plug from the outlet.
Afterwards, contact the sales company (or maintenance
service center). This may result in fire or electric shock if no
action is taken. When the product is dropped, or if the cover
or some other part is damaged, turn off the power switch,
and remove the power plug from the outlet. Afterwards,
contact the sales company (or maintenance service center).
Using the product without take any corrective action may
result in fire or electric shock.
When inserting the power cable into the AC adapter to
connect the product, be sure to confirm that the product power
switch has been turned off. Also, when inserting it into the
outlet, confirm that the AC adapter is properly connected to
the product. Not doing so result in electric shock.
In order to prevent any hazards from the vinyl bag that
packages this product, please place it out of the reach of
children.
In case of any accident with the bag, please consult a doctor
immediately.
If any dirt is found on or around the metal pins of the power
plug, wipe it off using a dry cloth. Not doing so may result in
fire.
Do not alter the product in any way. For internal check or
repair, please request the sales company (or maintenance
service center). There are high voltage parts and sharp
parts inside which can cause electric shock or injury.
Caution
Do not place heavy objects on the product.
This may destroy the balance and cause the product to fall
over or down, resulting in injuries.
Do not locate the product on a place with severe vibration, or
on an unstable or inclined surface. The product may fall over
or down, resulting in injuries.
Do not leave the product in high-temperature locations, such
as directly under the sun or near a heater, for long periods of
time. High temperature may cause the cover or other parts to
be heated, deformed, or melted, and the temperature inside
the product may also rise, resulting in fire.
Do not open the cover of the print section of the device and
insert any objects including your fingers during or
immediately after use. This may result in injury or burns.
Do not touch the print head or motor during or immediately
after printing.
This may result in burns.
During printer operation, do not touch the movable parts, such
as gears or cutters. Touching movable parts may result in
injury.
Do not touch the cutter blade.
As there is a cutter at the paper exit, do not attempt to insert
your hands inside it at any time, whether or not the printer is in
operation.
Do not open the cover of the print section of the device and
touch the print head during or immediately after use., This
may result in injury or burns.
- vii -
When shifting the product, be sure to remove the power plug
from the outlet. In addition, also remove the connection
cable, etc. Pay adequate attention to your feet while
performing the operation.
Scratching the power cable may result in electric shock
or fire, and injuries may also be caused if the product
falls over or down.
When removing the power plug, instead of pulling the
electric cord, be sure to remove it by gripping the power
plug.
If the power
cable is pulled, the core of the electric cord may
become exposed or broken, resulting in fire or electric
shock.
When the weather conditions indicate a chance of a lighting
strike, be sure to remove the power plug from the outlet for
safety.
Not doing so may result in fire.
When not using the device for a long time, be sure to remove
the power plug from the outlet for safety.
Not doing so may result in fire.
Firmly insert the power plug into the outlet.
An improper connection may result in fire or electric
shock.
- viii -
Andere Handbücher für FP-1000
3
Inhaltsverzeichnis
Andere Fujitsu Drucker Handbücher
Fujitsu
Fujitsu DL4400 Bedienungsanleitung
Fujitsu
Fujitsu DL700 Bedienungsanleitung
Fujitsu
Fujitsu PrintPartner 20W Bedienungsanleitung
Fujitsu
Fujitsu DL7400Pro Bedienungsanleitung
Fujitsu
Fujitsu DL7400 Bedienungsanleitung
Fujitsu
Fujitsu PrintPartner 8000 Bedienungsanleitung
Fujitsu
Fujitsu M304X series Installations- und Betriebshandbuch
Fujitsu
Fujitsu PrintPartner 16ADV Installationshandbuch
Fujitsu
Fujitsu FP-1000 Bedienungsanleitung
Fujitsu
Fujitsu FTP-641MCL101/102 Installationsanleitung
Fujitsu
Fujitsu DL9300 Bedienungsanleitung
Fujitsu
Fujitsu PrintPartner 10W Bedienungsanleitung
Fujitsu
Fujitsu ApeosPrint C4030 Bedienungsanleitung
Fujitsu
Fujitsu Fi-718PR Handbuch
Fujitsu
Fujitsu FTP-651MCL101 Bedienungsanleitung
Fujitsu
Fujitsu DL6400PRO Bedienungsanleitung
Fujitsu
Fujitsu FP-410 Bedienungsanleitung
Fujitsu
Fujitsu fi-4530C Konfigurationshandbuch
Fujitsu
Fujitsu FTP-631MCL351 Bedienungsanleitung
Fujitsu
Fujitsu fi-7480 Bedienungsanleitung
