Fujitsu BS2000 SE Series Bedienungsanleitung

Edition April 2017

English

SE700 / SE500

Server Unit /390

FUJITSU Server BS2000

Operating Manual

Valid for:

SE700 / SE500 / SE300 (basic software V6.1A and higher)

SE700B / SE500B / SE300B (basic software V6.2A and higher)

Comments…Suggestions…Corrections…

The User Documentation Department would like to know your

opinion on this manual. Your feedback helps us to optimize our

documentation to suit your individual needs.

Feel free to send us your comments by e-mail to:

manuals@ts.fujitsu.com

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system which

complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

This manual is printed

on paper treated with

chlorine-free bleach.

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source

community. The Xen® mark is registered with the U.S. Patent and Trademark Office, and may also be registered in

other countries.

Novell and SUSE are registered brands of Novell, Inc. in the USA and other countries.

Linux is a registered brand of Linus Torvalds.

Windows® is a registered trademark of Microsoft Corporation.

The Linux-based basic software M2000, X2000, and HNC which is installed on the Management Unit,

Server Unit x86, and HNC contains Open Source Software. The licenses for this can be found in the LICENSES

directory on the relevant installation DVD

U41859-J-Z126-2-76

Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

19. April 2017 Stand 18:05.02 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.ivz

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Server Unit SU700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 CPU box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.2 Channel box (CHE box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3 Server Unit SU500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.1 CPU box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.2 Channel box (CHE box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4 Operating the service processor . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4.1 Opening the SVP console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.2 General SVP frame structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4.2.1 System status messages in line 22 . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4.2.2 System status messages in line 23 . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.2.3 Hardware status display in line 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.2.4 Status displays in line 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.3 Using SVP frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.1 SVP functions (function keys) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.3.2 Switching between SVP frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.3.3 Options for switching between frames . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.4 SVP frames and subframes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.4.1 (ML) MODE SELECTION FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.4.2 (LD) PROGRAM LOAD FRAME: BASIC . . . . . . . . . . . . . . . . . . . . . . . . 27

4.4.2.1 (LD) PROGRAM LOAD FRAME: DETAIL-1 . . . . . . . . . . . . . . . . . . . . 28

Contents

U41859-J-Z126-2-76

4.4.2.2 (LD) PROGRAM LOAD FRAME: DETAIL-2 . . . . . . . . . . . . . . . . . . . . 32

4.4.3 (ST) STATUS DISPLAY FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.4.4 (MA) MANUAL OPERATION FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4.4.5 (AD) ALTER/DISPLAY FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

4.4.6 (ME) MESSAGE FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

4.4.7 (CH) CH/SUBCH STATUS DISPLAY FRAME: CHANNEL . . . . . . . . . . . . . . . 42

4.4.8 (AU) AUXILIARY FRAME: MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

4.4.8.1 (AU1) AUXILIARY FRAME: REAL CLOCK . . . . . . . . . . . . . . . . . . . . . 45

4.4.8.2 (AU2) AUXILIARY FRAME: IORSF CONTROL . . . . . . . . . . . . . . . . . . 46

4.4.8.3 (AU3) AUXILIARY FRAME: RELATED SCB’S . . . . . . . . . . . . . . . . . . . 48

4.4.8.4 (AU4) AUXILIARY FRAME: POWER STAND-BY/IMPL . . . . . . . . . . . . . . 49

4.4.8.5 (AU5) AUXILIARY FRAME: LOAD PRESET1 . . . . . . . . . . . . . . . . . . . 50

4.4.9 (MF) MSF FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

4.4.10 (PA) PERFORMANCE ANALYZER FRAME . . . . . . . . . . . . . . . . . . . . . . 54

4.5 Examples of SVP operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

4.5.1 Selecting IORSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

4.5.2 Activating IORSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

4.5.3 Setting up PROGRAM LOAD FRAME PRESET1 . . . . . . . . . . . . . . . . . . . 59

4.5.4 Setting up PROGRAM LOAD FRAME PRESET2 . . . . . . . . . . . . . . . . . . . 61

4.5.5 Executing IPL in PROGRAM LOAD FRAME: DETAIL-1 . . . . . . . . . . . . . . . . 62

4.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2 . . . . . . . . . . . 66

5 HNC (High Speed Net Connect) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

5.1 Front of the HNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

5.2 Rear of the HNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

6 What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

6.1 Indicators when a hardware fault occurs . . . . . . . . . . . . . . . . . . . . . . 81

6.2 Performing a system dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

U41859-J-Z126-2-76 5

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

19. April 2017 Stand 18:05.02 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k01

1 Introduction

The FUJITSU Server BS2000 SE Series unites the existing server lines S servers and SQ

servers in the server line SE servers.

Depending on requirements, the SE server contains all the system components needed for

operation as an overall application:

– /390-based BS2000 Server Unit

– x86-based Server Units with BS2000, Linux or Windows guest systems

– x86-based Application Units for operation under Linux, Windows or VMware

– Shareable tape and disk periphery

– A high-speed, server-internal infrastructure to connect the components with each other

and with the customer LAN or SAN.

Information on the hardware lifecycle of the FUJITSU Server BS2000 SE Series

(Changes since the last edition of the manual)

With the hardware lifecycle of the SE series, the hardware basis for the Server Unit x86, the

Management Unit and the HNC has been renewed. These new generation versions are

called SU300 M2, MU M2 and HNC M2. They are supported from basic software V6.2A

onwards.

The FUJITSU BS2000 servers of the SE series that are equipped with this hardware

generation are called SE300B, SE500B and SE700B.

The changes in the manuals are mainly due to these new hardware lifecycle generation

models. Any differences to the previous models regarding structure and operation are

described in detail.

Information on using the manual

The SE700 / SE500 / SE300 Operating Manual, which consists of a number of modules,

describes the features and hardware components of the FUJITSU Server BS2000 of the

SE Series. Users should read the operating manuals carefully in order to obtain optimal

performance from the SE server.

Introduction

6 U41859-J-Z126-2-76

This manual described the hardware component Server Unit /390 (SU700 and SU500) and

complements the Basic Operating Manual [1]. You will find a comprehensive introductory

chapter in the Basic Operating Manual . The chapters "Important notes" chapter on SE

server operation and "Environmental protection and service" are contained only in the Basic

Operating Manual .

U41859-J-Z126-2-76 7

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

13. April 2017 Stand 17:48.54 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k03

2 Server Unit SU700

This section describes the Server Unit SU700. SE700 is equipped with an SU700 as the

first Server Unit.

iComponents and ports which are not used are not described below.

The SU700 enables BS2000 to execute (in Native mode on on BS2000 VMs) on /390 archi-

tecture.

Features

– 10 models with a high performance range are available. Depending on the model, one

or two processor modules are used. The processor module has 8 CPUs. Depending on

the model, 2 to 15 processors are available. Capacity on Demand permits temporary

processor attachment.

– One hot spare processor is available with dynamic activation.

– The main memory is up to 256 GB in size.

– The I/O system has up to 126 Fibre Channels, each with a throughput of 8 Gbit/s.

– The SU supports a 10 Gbps LAN (connection via the HNC).

The Server Unit SU700 consists of the following components:

– a CPU box (see section “CPU box”)

– an AROMA-P (Automatic and Remote Operation Manager)

controls the power supply of the SU and occupies two height units (HUs).

– two to eight channel boxes (see section “Channel box (CHE box)”)

CPU box Server Unit SU700

8 U41859-J-Z126-2-76

2.1 CPU box

Depending on the configuration, the CPU box contains one or two system boards.

Each system board contains a processor chip with the following features:

– depending on the model, up to eight CPU cores with a joint cache

– two IOPs (I/O processors)

– one Mac (Memory Access Controller)

– The processor chip is connected directly to the memory of the system board.

– Processors on different system boards communicate over an Inter Connect Interface.

The CPU box, together with AROMA-P, occupies six height units (HUs) in the rack.

2.2 Channel box (CHE box)

Depending on the configuration level, up to eight channel boxes (#0 through #7) and up to

126 FC channels are possible in an SE700. In the basic configuration, the SU700 has two

channel boxes, channel box #0 and channel box #4.

Up to eight channel modules, each with two FC channels (8 Gbps), can be integrated into

a channel box. Only in the case of the first channel box is the first slot already occupied on

the system side.

A channel box occupies two height units (HUs) in the rack.

U41859-J-Z126-2-76 9

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

13. April 2017 Stand 17:48.54 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303914_BA_SU_390_update_2\prod_e\ba_su390.k04

3 Server Unit SU500

This section describes the Server Unit SU500. SE500 is equipped with an SU500 as the

first Server Unit.

iComponents and ports which are not used are not described below.

The SU500 enables BS2000 to execute (in Native mode on on BS2000 VMs) on /390 archi-

tecture.

Features

– 6 models with a high performance range are available. The processor module has 8

CPUs. Depending on the model, 1 to 3 processors are available. Capacity on Demand

permits temporary processor attachment.

– One hot spare processor is available with dynamic activation.

– The main memory is up to 64 GB in size.

– The I/O system has up to 94 Fibre Channels, each with a throughput of 8 Gbit/s.

– The SU supports a 10 Gbps LAN (connection via the HNC).

The Server Unit SU500 consists of the following components:

– a CPU box (see section “CPU box”)

– an AROMA-P (Automatic and Remote Operation Manager)

controls the power supply of the SU and occupies two height units (HUs).

– two to six channel boxes (see section “Channel box (CHE box)”)

CPU box Server Unit SU500

10 U41859-J-Z126-2-76

3.1 CPU box

The CPU box contains one system board.

The system board contains a processor chip with the following features:

– four CPU cores with a joint cache

– two IOPs (I/O processors)

– one Mac (Memory Access Controller)

The CPU box, together with AROMA-P, occupies six height units (HUs) in the rack.

3.2 Channel box (CHE box)

Depending on the configuration level, up to six channel boxes (#0 through #5) are possible.

In the basic configuration, the SU500 has two channel boxes, channel box #0 and channel

box #5.

Up to eight channel modules, each with two FC channels (8 Gbps), can be integrated into

a channel box. Only in the case of the first channel box is the first slot already occupied on

the system side.

A channel box occupies two height units (HUs) in the rack.

Andere Handbücher für BS2000 SE Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY TX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX25 0 M4 Series Montageanleitung

Fujitsu

Fujitsu SPARC EnterpriseM3000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Installationsanleitung

Fujitsu

Fujitsu SPARC ENTERPRISE T5220 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Leitfaden

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 580A Technisches Handbuch

Fujitsu

Fujitsu SPARC M12-1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S5 Betriebsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M4 Bedienungsanleitung

Fujitsu

Fujitsu M10 Series Technisches Handbuch

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungs- und Montageanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung