Fujitsu PRIMERGY BX900 Bedienungsanleitung

QuickStart Guide

PRIMERGY BX900 Blade Server Systems

Fibre Channel Connection Blade BR5450

English

Brocade 5450 Embedded

Switch Module

QuickStart Guide

For Fujitsu PRIMERGY BX900 Blade Server Series

53-1001265-02

*53-1001265-02*

October 2009

2 of 20 Brocade 5450 Embedded Switch Module QuickStart Guide

PublicationNumber:53-1001265-02

Brocade, the Brocade B weave logo, Fabric OS, File Lifecycle Manager, MyView, Secure Fabric OS, SilkWorm, and StorageX are registered

trademarks and the Brocade B wing logo and Tapestry are trademarks of Brocade Communications Systems, Inc., in the United States and/or in

other countries. FICON is a registered trademark of IBM Corporation in the U.S. and other countries. All other brands, products, or service names

are or may be trademarks or service marks of, and are used to identify, products or services of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment,

equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time,

without notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available.

Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in this document may

require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with respect to any loss,

cost, liability, or damages arising from the information contained in this book or the computer programs that accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other open source

license agreements. To find-out which open source software is included in Brocade products, view the licensing terms applicable to the open

source software, and obtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.

Brocade Communications Systems, Incorporated

Document History

Corporate and Latin American Headquarters

Brocade Communications Systems, Inc.

1745 Technology Drive

San Jose, CA 95110

Tel: 1-408-333-8000

Fax: 1-408-333-8101

E-mail: info@brocade.com

Asia-Pacific Headquarters

Brocade Communications Singapore Pte. Ltd.

30 Cecil Street

#19-01 Prudential Tower

Singapore 049712

Singapore

Tel: +65-6538-4700

Fax: +65-6538-0302

E-mail: apac-info@brocade.com

European Headquarters

Brocade Communications Switzerland Sàrl

Centre Swissair

Tour B - 4ème étage

29, Route de l'Aéroport

Case Postale 105

CH-1215 Genève 15

Switzerland

Tel: +41 22 799 5640

Fax: +41 22 799 5641

E-mail: emea-info@brocade.com

Title Publication number Summary of changes Date

Brocade 5450 Embedded Switch Module

QuickStart Guide

53-1001265-01 New document February 2009

Brocade 5450 Embedded Switch Module

QuickStart Guide

53-1001265-02 Minor updates with new

screen captures

October 2009

Brocade 5450 Embedded Switch Module QuickStart Guide 3of20

Publication Number: 53-1001265-02

Overview

This Quick Start guide is intended as an overview to help experienced installers unpack, install, and configure an

Embedded Switch Module quickly. For more detailed installation and configuration instructions, see the Brocade

5450 Embedded Switch Module Hardware Reference Manual.

NOTE

Throughout this document, the Brocade 5450 Embedded Switch Module is referred to as the Embedded Switch

Module.

Installation and safety considerations

The Embedded Switch Module is designed to work in I/O bays 3 through 6 of the BX900 Blade Server chassis. Refer

to the PRIMERGY BX900 S1 Basic Unit Operating Manual and make sure to comply with installation requirements.

Installing multiple switches

Each Embedded Switch Module must be assigned a unique Ethernet IP address during configuration. Once the

default Ethernet IP address on the Embedded Switch Module has been changed, you may install additional

Embedded Switch Modules in the chassis.

If you do not have a DHCP server, install and configure one Embedded Switch Module at a time. This is required so

that Ethernet IP address conflicts do not occur with duplicate default Ethernet IP addresses.

Refer to the PRIMERGY BX900 S1 Basic Unit Operating Manual for help identifying your specific enclosure setup,

available connections, and power requirements.

Electrical considerations

The Embedded Switch Module requires 35 watts nominal (maximum of 50 watts), provided by the chassis. No other

power requirement or provision exists.

Environmental considerations

Ensure proper cooling and ventilation by verifying the following:

•The air vents on the chassis are not blocked or restricted.

•The ambient air temperature at the front of the enclosure does not exceed 35º C (95º F) while the Embedded

Switch Module is operating.

4 of 20 Brocade 5450 Embedded Switch Module QuickStart Guide

PublicationNumber:53-1001265-02

Unpacking and installing the Embedded Switch Module

If the Embedded Switch Module is installed in the Blade Server chassis as shipped to you, skip this section. This

section applies when installing a new module in an empty bay or replacing an existing Embedded Switch Module.

Perform the following steps to remove the Embedded Switch Module from its shipping package.

1. Open the shipping box and inspect the contents.

Do not insert a damaged Embedded Switch Module into the Blade Server chassis. If the Embedded Switch

Module appears to be damaged, contact your sales representative before proceeding.

2. Remove the cardboard accessory tray from on top of the Embedded Switch Module.

This tray contains the documentation, regulatory statements, product information guide, and Documentation

CD.

3. Remove the Embedded Switch Module from the box.

The protective foam ends will slide out with the Embedded Switch Module.

4. Remove the foam ends from the Embedded Switch Module.

5. Be sure that you have taken the necessary precautions for electrostatic sensitivity; then break the seal warning.

6. Slide the Embedded Switch Module out of the antistatic sleeve and inspect it carefully for any obvious defects or

shipping damage.

7. For complete instructions to install the Embedded Switch Module into the Blade Server chassis, refer to the

section on installing an I/O module in the PRIMERGY BX900 S1 Basic Unit Operating Manual.

Cabling guidelines

After modifying the Embedded Switch Module’s IP address and domain name (if the Embedded Switch Module is in

Fabric OS Native mode), we recommend that you cable all external ports to fabric connections before bringing the

Embedded Switch Module online. Refer to one of the following procedures for steps on modifying the IP address:

•“Using the PRIMERGY BX900 Management Blade CLI to change system settings” on page 10

•“Using the PRIMERGY BX900 Management Blade GUI to set the IP address” on page 12

Begin by cabling ports 19 through 25 and 0. Ports 19 and 20 are licensed at the factory as part of Dynamic Ports On

Demand (DPOD). By cabling these ports first, you will not need to move licenses to other ports you may have cabled.

Brocade 5450 Embedded Switch Module QuickStart Guide 5of20

Publication Number: 53-1001265-02

About Embedded Switch Module configuration

Use procedures in this chapter to configure the Embedded Switch Module to operate on a network and fabric. Also

use steps to change the Embedded Switch Module’s operating mode (Fabric OS Native and Access Gateway modes).

NOTE

Although the Embedded Switch Module is configured at the factory for Fabric OS Native mode, you can enable it for

Access Gateway mode. For more information, refer to “Changing from Fabric OS Native to Access Gateway mode” on

page 17

This chapter provides configuration procedures that use Embedded Switch Module Command Line Interface (CLI)

and the Web Tools application. For details refer to the Web Tools Administrator’s Guide, Access Gateway

Administrator’s Guide, and Fabric OS Command Reference Manual. If the same operation can be performed using

the PRIMERGY BX900 Management Blade application, use that application instead.

Items required for configuration

The following items are required for configuring and connecting the Embedded Switch Module for use in a network

and fabric:

•The Embedded Switch Module installed in a Blade Server chassis. For instructions, refer to the steps on

installing an I/O module in the PRIMERGY BX900 S1 Basic Unit Operating Manual for the Blade Server chassis.

•Access to an FTP server for backing up the Embedded Switch Module configuration.

•Access to these publications:

•PRIMERGY BX900 S1 Basic Unit Operating Manual

•PRIMERGY BX900 S1 Basic Unit Service Supplement

•PRIMERGY BX900 Management Blade User Guide

•Fabric OS Command Reference Manual

•Fabric OS Administrator’s Guide

•Access Gateway Administrator’s Guide

•Web Tools Administrator’s Guide

•SFP transceivers and compatible fiber cables, as required.

•If DHCP is not used to set the Embedded Switch Module IP address, you will need an unused IP address and a

corresponding subnet mask and gateway address. DHCP-enabled is the default.

•If the PRIMERGY BX900 Management Blade GUI or CLI management is not used to change the Embedded

Switch Module IP address, you will need a management workstation (computer) that has a terminal emulator

(such as HyperTerminal) or a keyboard, video, and mouse (KVM) device. You will also need a serial cable to

connect the workstation to the Embedded Switch Module serial console port.

6 of 20 Brocade 5450 Embedded Switch Module QuickStart Guide

PublicationNumber:53-1001265-02

Setting the Embedded Switch Module IP address

IP parameters are stored on the Embedded Switch Module. By default, the IP address for the Embedded Switch

Module is configured as DHCP.

NOTE

It is recommended that you set the IP address using the PRIMERGY BX900 Management Blade ServerView GUI

application because this enables centralized management of the Embedded Switch Module.

You can reset the IP address using one of the following methods:

•Embedded Switch Module Command Line Interface (CLI). See “Using the CLI menu from the serial console” on

page 6 for instructions.

•PRIMERGY BX900 Management Blade ServerView CLI. See “Using the PRIMERGY BX900 Management Blade

CLI to change system settings” on page 10 for instructions.

•PRIMERGY BX900 Management Blade ServerView graphical user interface (GUI). See “Using the PRIMERGY

BX900 Management Blade GUI to set the IP address” on page 12 for instructions.

ATTENTION

Do not connect the Embedded Switch Module to the internal network until the IP address is correctly set for your

Ethernet network requirements.

Using the CLI menu from the serial console

Use the following steps to connect and modify the Embedded Switch Module IP address through the PRIMERGY

BX900 Management Blade (MMB), regardless of whether you know the management IP address.

1. Disable any serial communication programs that are running on the management workstation.

2. Connect a serial cable from a management workstation to the MMB.

3. Open a HyperTerminal on a PC or TERM in a Linux or UNIX environment and establish a terminal session to the

Embedded Switch Module from the management workstation. You will use this connection if you want to reset

the module’s IP address using CLI commands and perform other configuration tasks.

Brocade 5450 Embedded Switch Module QuickStart Guide 7of20

Publication Number: 53-1001265-02

4. Perform the following steps if your workstation uses Windows 95, 98, 2000, XP, or NT. Otherwise, proceed to

step 5.

a. Click Start and select Programs > Accessories > Communications > Hyperterminal.

The Connection Description dialog box displays.

FIGURE 1 Connection Description dialog box

b. Enter a name for the connection in the Connection Description text box, and click OK.

FIGURE 2 Connect To dialog box

8 of 20 Brocade 5450 Embedded Switch Module QuickStart Guide

PublicationNumber:53-1001265-02

c. From the Hyperterminal window, select an available COM port from the Connect using list and click OK.

The Port Settings dialog box displays.

FIGURE 3 COM Properties dialog box

d. From the COM Properties window, select the following configuration values and click OK.

•Bits per second: 115200

•Databits: 8

•Parity: None

•Stop bits: 1

•Flow Control: None

The Hyperterminal is connected and ready to accept text.

FIGURE 4 Hyperterminal

e. Use the MMB default username and password. The default is admin for the username and admin for the

password.

NOTE

The Embedded Switch Module comes direct from the factory with an additional startup process to set the

initial password. If you want to bypass setting the initial password, use Control-C to exit or press Enter to

proceed. The password will not be changed. You will be prompted again at the next login until the password

is changed.

Brocade 5450 Embedded Switch Module QuickStart Guide 9of20

Publication Number: 53-1001265-02

5. Perform the following steps if your workstation uses Linux or UNIX.

a. Enter the following command at the command prompt:

tip /dev/ttyb - 115200

b. When the terminal application stops reporting information, press Enter to display the login prompt.

c. Enter admin for the username and admin for the password.

6. Use the following Telnet menu options to change the IP address of the selected Embedded Switch Module.

a. Select (3) Console Redirection from the following Console Menu.

--------------------------------

Console Menu

--------------------------------

(1) Management Agent

(2) Emergency Management Port

(3) Console Redirection

(4) TFTP update

(5) Logout

(6) Reboot Management Blade

(7) System Information Dump

(8) Command Line Interface

(9) Account Management

Enter selection: 3

b. Select (1) Console Redirect Connection Blade from the following Console Redirection Table.

--------------------------------

Console Redirection Table

--------------------------------

(1) Console Redirect Connection Blade

(2) Set Return Hotkey , Ctrl+(a character) : Q

(3) Set Console Redirection Timeout : 900

Enter selection or type (0) to quit: 1

c. Select the location where the switch is installed from the following menu.

-------------------------------------

Console Redirect Connection Blade

-------------------------------------

(2) Console Redirect Connection Blade-2 (Selected:Backup/Restore)

(3) Console Redirect Connection Blade-3

(4) Console Redirect Connection Blade-4

(5) Console Redirect Connection Blade-5

Enter selection or type (0) to quit: 5

You should now be at the switch login prompt.

7. Verify that you are able to login to the switch:

Password: password

Andere Handbücher für PRIMERGY BX900

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY TX200 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Leitfaden

Fujitsu

Fujitsu SPARC Enterprise M3000 Installations- und Betriebsanleitung

Fujitsu

Fujitsu Primergy TX120 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S6 Bedienungsanleitung

Fujitsu

Fujitsu Server PRIMERGY TX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 400 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX600 Leitfaden

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Montageanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S8 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung