Fujitsu ETERNUS DX Disk Bedienungsanleitung

FUJITSU Storage

ETERNUS DX

Configuration Guide -Server Connection-

(SAS) for Windows®

P3AM-3442-18ENZ0

This page is intentionally left blank.

Preface

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX to a server running Windows® via a SAS interface.

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX, server, OS, SAS cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS DX.

18th Edition

April 2020

The Contents and Structure of this Manual

This manual is composed of the following 11 chapters.

•"Chapter 1 Workflow" (page 6)

This chapter describes the workflow required to connect a server running Windows® to an ETERNUS DX.

•"Chapter 2 Checking the Server Environment" (page 8)

This chapter describes which servers can be connected to ETERNUS DX storage systems.

•"Chapter 3 Notes" (page 9)

This chapter describes issues that should be noted when connecting the ETERNUS DX storage systems and

server.

•"Chapter 4 Setting Up the ETERNUS DX" (page 17)

This chapter describes how to set up the ETERNUS DX storage systems using the ETERNUS Web GUI.

•"Chapter 5 Setting Up the SAS Switches" (page 18)

This chapter describes how to set up the SAS switches.

•"Chapter 6 Installing the OS" (page 20)

This chapter describes how to install an OS when it is not installed on a server.

•"Chapter 7 Installing the Drivers" (page 21)

This chapter describes how to install the SAS cards and drivers.

•"Chapter 8 Checking the Registry Information" (page 25)

This chapter describes how to check the registry information.

•"Chapter 9 Checking the Connected Devices" (page 26)

This chapter describes how to check the connection status between the server and ETERNUS DX.

•"Chapter 10 Creating the Disk Partitions" (page 28)

This chapter describes how to create disk partitions.

•"Chapter 11 Setting Up the Cluster Configuration" (page 29)

This chapter describes issues that should be noted when building a cluster system.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

Table of Contents

Chapter 1 Workflow 6

Chapter 2 Checking the Server Environment 8

2.1 Hardware ....................................................................................................................................... 8

2.2 Operating System (OS)................................................................................................................... 8

2.3 SAS Cards........................................................................................................................................ 8

Chapter 3 Notes 9

3.1 Connection Notes for PRIMERGY ..................................................................................................... 9

3.2 Connection Notes for Other Companies' Industry Standard Servers................................................. 9

3.3 SAS Card Driver Notes................................................................................................................... 10

3.4 Notes about Driver for ETERNUS DX Storage Systems ................................................................... 10

3.5 MSCS and WSFC Notes .................................................................................................................. 10

3.6 ETERNUS VDS Hardware Provider Notes........................................................................................ 11

3.7 Notes about Standard Multipath Driver (msdsm) for Windows Server®........................................ 11

3.8 Server Startup Notes..................................................................................................................... 11

3.9 System Design Sheet Notes.......................................................................................................... 11

3.10 Notes about Connections with a Windows Server®...................................................................... 12

3.11 Notes for Formatting a LUN of the ETERNUS DX from a Windows Server®................................... 16

Chapter 4 Setting Up the ETERNUS DX 17

Chapter 5 Setting Up the SAS Switches 18

Chapter 6 Installing the OS 20

Chapter 7 Installing the Drivers 21

7.1 SAS Card Driver Installation and Settings...................................................................................... 21

7.1.1 For PRIMERGY .....................................................................................................................................................21

7.1.2 Other Companies' Industry Standard Servers.......................................................................................................21

7.2 Multipath Environment Configuration.......................................................................................... 21

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

7.2.1 ETERNUS Multipath Driver...................................................................................................................................21

7.2.2 Standard Multipath Driver (msdsm) for Windows Server®...................................................................................22

7.3 Single-Path Environment Configuration ....................................................................................... 24

Chapter 8 Checking the Registry Information 25

Chapter 9 Checking the Connected Devices 26

9.1 Turning On the Devices ................................................................................................................ 26

9.2 Checking the LUNs ....................................................................................................................... 26

9.3 Checking the ETERNUS DX Storage Systems' Connection Status.................................................... 27

Chapter 10 Creating the Disk Partitions 28

Chapter 11 Setting Up the Cluster Configuration 29

Table of Contents

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

Chapter 1

Workflow

This chapter describes how to connect the ETERNUS DX storage systems to a server. The workflow is shown

below.

Required Documents

•"Server Support Matrix"

•"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX to

be connected

•"ETERNUS Web GUI User's Guide"

Workflow

Setting Up the ETERNUS DX

Set up the ETERNUS DX using ETERNUS Web GUI.

•"Chapter 4 Setting Up the ETERNUS DX" (page 17)

•Checking the setup and maintenance operations

-"ETERNUS Web GUI User's Guide"

•Setting up the ETERNUS DX

-"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the

ETERNUS DX to be connected

Setting Up the SAS Switches

Set up the SAS switch.

•"Chapter 5 Setting Up the SAS Switches" (page 18)

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

Installing the Driver

Install the appropriate driver for the SAS card and Multipath Driver to be used.

•Installing and setting up the card and driver

-"Chapter 7 Installing the Drivers" (page 21)

•Checking the SAS card driver versions

-"Server Support Matrix"

Checking the Connected Devices

Check the ETERNUS DX LUNs and status of the connection to the server.

•"Chapter 9 Checking the Connected Devices" (page 26)

Preparing for Operation

Create disk partitions and set up the cluster configuration as necessary.

•"Chapter 10 Creating the Disk Partitions" (page 28)

•"Chapter 11 Setting Up the Cluster Configuration" (page 29)

Chapter 1 Workflow

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

Chapter 2

Checking the Server Environment

Connection to servers is possible in the following environments.

Check the "Server Support Matrix" for server environment conditions.

2.1 Hardware

Refer to the "Server Support Matrix".

2.2 Operating System (OS)

Refer to the "Server Support Matrix".

2.3 SAS Cards

Refer to the "Server Support Matrix".

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

Chapter 3

Notes

Note the following issues when connecting the ETERNUS DX to a server.

3.1 Connection Notes for PRIMERGY

•To ensure reliable access to the storage systems, the following methods are recommended:

-Connection via multiple paths

-Use of multipath drivers which support path redundancy control

Configure a multipath environment and select a multipath driver that supports path redundancy control

to increase redundancy and reliability of the connection between the ETERNUS DX storage systems and

the server.

•LUN recognition by the Windows® plug and play function cannot be guaranteed.

•The following cluster configuration is supported for Windows®:

-WSFC (Windows Server Failover Cluster) configuration

-MSCS (Microsoft Cluster Service) configuration

For details on servers which support cluster configuration, consult your FUJITSU sales representative.

3.2 Connection Notes for Other Companies' Industry Standard

Servers

•To build a cluster configuration for Windows®, use Microsoft Cluster Service (MSCS), Windows Server Fail-

over Cluster (WSFC), and MSCS- and WSFC-compatible applications. This cluster configuration must also use

only one type of SAS card. Operation cannot be guaranteed if the cluster is configured using multiple types

of SAS cards.

•LUN recognition by the Windows® plug and play function cannot be guaranteed.

•To ensure reliable access to the storage systems, the following methods are recommended:

-Connection via multiple paths

-Use of drivers for ETERNUS DX storage systems which support path redundancy control

Configure a multipath environment and select a driver for ETERNUS DX storage systems that supports

path redundancy control to increase redundancy and reliability of the connection between the ETERNUS

DX storage systems and the server.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

3.3 SAS Card Driver Notes

•When the same type of chip is used for both the SAS card and the server's onboard RAID or RAID card, the

driver installed for the SAS card may also control the onboard RAID or RAID card.

Contact the server vendor for details of how each onboard RAID or RAID card is affected by the SAS card

driver.

•The ETERNUS Multipath Driver supports path redundancy control (path fail-over).

For product information, refer to the following URL:

http://www.fujitsu.com/global/products/computing/storage/software/eternus-mpd/

3.4 Notes about Driver for ETERNUS DX Storage Systems

When connecting the server to the ETERNUS DX with multipath configuration, using the path redundancy

control (path fail-over) function with a driver for ETERNUS DX storage systems, one of the following drivers is

required by the server:

OS Driver

Windows Server® 2019

Windows Server® 2016

Windows Server® 2012 R2

Windows Server® 2012

Windows Server® 2008 R2

Windows Server® 2008

ETERNUS Multipath Driver

For product information, refer to the following URL:

http://www.fujitsu.com/global/products/computing/storage/software/eternus-mpd/

Even when single-path connection is used between the ETERNUS DX and server, an ETERNUS DX compatible

driver (ETERNUS device driver) is not required.

3.5 MSCS and WSFC Notes

•To use MSCS or WSFC configuration, install either the driver for ETERNUS DX storage systems or the stand-

ard multipath driver (msdsm) for Windows Server® 2019, Windows Server® 2016, Windows Server® 2012 R2,

Windows Server® 2012, Windows Server® 2008 R2 or Windows Server® 2008 on each node (server), and

then check the connections before MSCS or WSFC installation.

•Check the registry values by following the instructions in "Chapter 8 Checking the Registry Information"

(page 25), after installing MSCS or WSFC.

•When setting up the MSCS, a reset group must be set for the ETERNUS DX. A reset group does not need to

be set for WSFC.

Chapter 3 Notes

3.3 SAS Card Driver Notes

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows®

P3AM-3442-18ENZ0

Andere Handbücher für ETERNUS DX Disk

Inhaltsverzeichnis

Andere Fujitsu Lagerung Handbücher

Fujitsu

Fujitsu ETERNUS Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX500 S4 Bedienungsanleitung

Fujitsu

Fujitsu Eternus DX80 S2 Bedienungsanleitung

Fujitsu

Fujitsu MAW3073NC/NP Product/ Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S3 Bedienungsanleitung

Fujitsu

Fujitsu Eternus CS800 S2 Bedienungsanleitung

Fujitsu

Fujitsu MBC2073RC SERIES Bedienungsanleitung

Fujitsu

Fujitsu MHW2120BK Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 Bedienungsanleitung

Fujitsu

Fujitsu MAG3182FC SERIES Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT20 S2 Bedienungsanleitung

Fujitsu

Fujitsu MPB3021AT Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX Disk Bedienungsanleitung

Fujitsu

Fujitsu MHW2040AC Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT140 Bedienungsanleitung

Fujitsu

Fujitsu LTO-5 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS CS800 Bedienungsanleitung

Fujitsu

Fujitsu MPF3XXXAH Bedienungsanleitung

Fujitsu

Fujitsu FD-1100MT Bedienungsanleitung

Fujitsu

Fujitsu M2266S Versionshinweis

Fujitsu

Fujitsu DYNAMO 640AI Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S2 Bedienungsanleitung

Fujitsu

Fujitsu MBA3300FD Bedienungsanleitung

Fujitsu

Fujitsu GP5-HD9G3 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung