Fujitsu ETERNUS DX Disk Bedienungsanleitung

FUJITSU Storage

ETERNUS DX

Configuration Guide -Server Connection-

(SAS) for Linux

P3AM-3472-14ENZ0

This page is intentionally left blank.

Preface

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX to a server running Linux via a SAS interface.

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX, server, OS, SAS cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS DX.

14th Edition

April 2018

The Contents and Structure of this Manual

This manual is composed of the following ten chapters.

•"Chapter 1 Workflow" (page 6)

This chapter describes how to connect the ETERNUS DX storage systems to a server running Linux.

•"Chapter 2 Checking the Server Environment" (page 10)

This chapter describes which servers can be connected to ETERNUS DX storage systems.

•"Chapter 3 Notes" (page 11)

This chapter describes issues that should be noted when connecting the ETERNUS DX storage systems and

server.

•"Chapter 4 Setting Up the ETERNUS DX" (page 13)

This chapter describes how to set up the ETERNUS DX storage systems using ETERNUS Web GUI.

•"Chapter 5 Setting Up the SAS Switches" (page 14)

This chapter describes how to set up the SAS switches.

•"Chapter 6 Installing the Driver" (page 16)

This chapter describes how to install the SAS card driver.

•"Chapter 7 Setting Up the Server" (page 17)

This chapter describes how to make the server recognize the SAS card.

•"Chapter 8 LUN Recognition" (page 18)

This chapter describes how to make the server recognize the LUNs of the ETERNUS DX.

•"Chapter 9 Setting Up and Checking the Multipath Driver" (page 21)

This chapter describes how to set multipaths for multipath connection.

•"Chapter 10 Setting a File System" (page 22)

This chapter describes how to create a file system.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

Table of Contents

Chapter 1 Workflow 6

1.1 When the Multipath Driver is not Used........................................................................................... 6

1.2 When the Multipath Driver is Used................................................................................................. 8

Chapter 2 Checking the Server Environment 10

2.1 Hardware ..................................................................................................................................... 10

2.2 Operating System (OS)................................................................................................................. 10

2.3 SAS Cards...................................................................................................................................... 10

2.4 ETERNUS Multipath Driver or device-mapper multipath ............................................................... 10

Chapter 3 Notes 11

3.1 SAS Card Notes ............................................................................................................................. 11

3.2 Server Startup Notes..................................................................................................................... 11

3.3 Red Hat Enterprise Linux Notes.................................................................................................... 11

3.4 SUSE Linux Enterprise Server Notes.............................................................................................. 11

3.5 Notes on Creating and Mounting File Systems ............................................................................. 12

3.6 Notes on Changing the max_sectors_kb Value ............................................................................. 12

Chapter 4 Setting Up the ETERNUS DX 13

Chapter 5 Setting Up the SAS Switches 14

Chapter 6 Installing the Driver 16

6.1 For Fujitsu SAS Cards .................................................................................................................... 16

6.2 For LSI Logic SAS Cards ................................................................................................................. 16

Chapter 7 Setting Up the Server 17

7.1 For Fujitsu SAS Cards .................................................................................................................... 17

7.2 For LSI Logic SAS Cards ................................................................................................................. 17

Chapter 8 LUN Recognition 18

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

8.1 Setting Up the Server to Recognize LUNs...................................................................................... 18

8.2 Displaying the Recognized Logical Units ...................................................................................... 19

8.2.1 For Red Hat Enterprise Linux or Oracle Linux ......................................................................................................19

8.2.2 For SUSE Linux Enterprise Server.........................................................................................................................20

Chapter 9 Setting Up and Checking the Multipath Driver 21

9.1 Setting Up and Checking the ETERNUS Multipath Driver............................................................... 21

9.2 Setting Up and Checking the device-mapper multipath ............................................................... 21

Chapter 10 Setting a File System 22

Table of Contents

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

Chapter 1

Workflow

This chapter describes how to connect the ETERNUS DX to a server running Linux.

Which documents need to be referred to varies with the connection environment. Refer to the workflow that

follows to determine which documents are required.

Required Documents

•"Server Support Matrix"

•"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX to

be connected

•"Configuration Guide -Server Connection- (Fibre Channel/FCoE/iSCSI/SAS) for Linux device-mapper multi-

path"

•"ETERNUS Web GUI User's Guide"

•Manuals supplied with the server, SAS cards, and multipath driver

1.1 When the Multipath Driver is not Used

The documents and workflow required when a multipath driver is not used are as follows.

Workflow

Setting Up the ETERNUS DX

Set the various parameters required to operate the ETERNUS DX.

•Checking the setup and maintenance operations

-"Chapter 2 Checking the Server Environment" (page 10)

-"Chapter 4 Setting Up the ETERNUS DX" (page 13)

-"ETERNUS Web GUI User's Guide"

•Setting up the ETERNUS DX

-"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-

NUS DX to be connected

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

Setting Up the SAS Switches

Set up the SAS switch.

•"Chapter 5 Setting Up the SAS Switches" (page 14)

Installing the Driver

Install the appropriate driver for the SAS card being used.

•Checking the SAS card driver versions

-"Chapter 6 Installing the Driver" (page 16)

-"Server Support Matrix"

Setting Up the Server

Set the parameters required for connection to the ETERNUS DX.

•"7.1 For Fujitsu SAS Cards" (page 17)

•"7.2 For LSI Logic SAS Cards" (page 17)

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.

•"Chapter 8 LUN Recognition" (page 18)

Chapter 1 Workflow

1.1 When the Multipath Driver is not Used

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

1.2 When the Multipath Driver is Used

The documents and workflow required when a multipath driver is used are as follows.

Workflow

Setting Up the ETERNUS DX

Set the various parameters required to operate the ETERNUS DX.

•Checking the setup and maintenance operations

-"Chapter 2 Checking the Server Environment" (page 10)

-"Chapter 4 Setting Up the ETERNUS DX" (page 13)

-"ETERNUS Web GUI User's Guide"

•Setting up the ETERNUS DX

-"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-

NUS DX to be connected

Setting Up the SAS Switches

Set up the SAS switch.

•"Chapter 5 Setting Up the SAS Switches" (page 14)

Installing the Driver

Install the appropriate driver for the SAS card being used.

•Checking the SAS card driver versions

-"Chapter 6 Installing the Driver" (page 16)

-"Server Support Matrix"

Chapter 1 Workflow

1.2 When the Multipath Driver is Used

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

Setting Up the Server

Set the parameters required for connection to the ETERNUS DX.

•"7.1 For Fujitsu SAS Cards" (page 17)

•"7.2 For LSI Logic SAS Cards" (page 17)

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.

•"Chapter 8 LUN Recognition" (page 18)

When the ETERNUS Multipath Driver is used When the device-mapper multipath is used

Setting Up and Checking the ETERNUS Multi-

path Driver

Set up and check the ETERNUS Multipath Driver.

•"9.1 Setting Up and Checking the ETERNUS Mul-

tipath Driver" (page 21)

Setting Up and Checking the device-mapper

multipath

Set up and check the device-mapper multipath.

•"9.2 Setting Up and Checking the device-mapper

multipath" (page 21)

•"Configuration Guide -Server Connection- (Fibre

Channel/FCoE/iSCSI/SAS) for Linux device-map-

per multipath"

Chapter 1 Workflow

1.2 When the Multipath Driver is Used

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

Chapter 2

Checking the Server Environment

Connection to servers is possible in the following environments.

Check the "Server Support Matrix" for server environment conditions.

2.1 Hardware

Refer to the "Server Support Matrix".

2.2 Operating System (OS)

Refer to the "Server Support Matrix".

2.3 SAS Cards

Refer to the "Server Support Matrix".

2.4 ETERNUS Multipath Driver or device-mapper multipath

Refer to the "Server Support Matrix".

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0

Andere Handbücher für ETERNUS DX Disk

Inhaltsverzeichnis

Andere Fujitsu Lagerung Handbücher

Fujitsu

Fujitsu DISK DRIVES MHL2300AT Bedienungsanleitung

Fujitsu

Fujitsu M2488 Bedienungsanleitung

Fujitsu

Fujitsu MBC2036RC SERIES Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 Referenzhandbuch

Fujitsu

Fujitsu MAF3364LC - Enterprise 36.4 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY LTO3 Bedienungsanleitung

Fujitsu

Fujitsu MHY2120BH - Mobile 120 GB Hard Drive Benutzerhandbuch

Fujitsu

Fujitsu MAW3073 SERIES Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS LT270 S2 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS2000 100 Bedienungsanleitung

Fujitsu

Fujitsu GRANPOWER 5000 GP5-HDH461 Bedienungsanleitung

Fujitsu

Fujitsu MBA3073 SERIES Bedienungsanleitung

Fujitsu

Fujitsu MAG3182FC SERIES Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS AX Series Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX Disk Bedienungsanleitung

Fujitsu

Fujitsu MAA3182SC Installations- und Betriebshandbuch

Fujitsu

Fujitsu MBA3300FD Bedienungsanleitung

Fujitsu

Fujitsu PG-HD9G1C Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX S5 Series Installationsanleitung

Fujitsu

Fujitsu ETERNUS DX100 S4 Montageanleitung

Fujitsu

Fujitsu P3AM-5382-03ENZ0 Anleitung zur Verwendung

Fujitsu

Fujitsu PRIMERGY LTO2 Bedienungsanleitung

Fujitsu

Fujitsu eternus af Bedienungsanleitung

Fujitsu

Fujitsu GRANPOWER5000 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung