Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Bedienungsanleitung

FUJITSU Storage

ETERNUS DX, ETERNUS AF

Fibre Channel/

ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3, ETERNUS DX8700 S3 Hybrid Storage Systems,

ETERNUS DX400 S2 series, ETERNUS DX8700 S2 Disk Storage Systems,

ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Settings for BS2000 Connection

P3AM-5672-10ENZ0

Configuration Guide -Server Connection-

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Preface

For better clarity, the following naming conventions are used:

ETERNUS DX S2: ETERNUS DX410 S2/DX440 S2, ETERNUS DX8700 S2

ETERNUS DX S3: ETERNUS DX500 S3/DX600 S3, ETERNUS DX8700 S3

ETERNUS DX S4: ETERNUS DX500 S4/DX600 S4

ETERNUS AF: ETERNUS AF650/AF650 S2

ETERNUS DX/AF: ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF

This document briefly explains the required special settings in order to connect an ETERNUS DX/AF storage

system to a server running BS2000 via a Fibre Channel interface.

This document should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX/AF storage system, server, OS used, Fibre Channel card, drivers, etc.

•FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel)

ETERNUS DX S4/S3 series Hybrid Storage Systems, ETERNUS AF series, ETERNUS DX200F All-Flash Arrays

Settings

•FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)

ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700 S2 Disk Storage

System Settings

•FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)

Fibre Channel Switch Settings

•Web GUI User’s Guide

•ETERNUSmgr Install Guide

•ETERNUSmgr User Guide

•Any manuals supplied with the Fibre Channel card driver and software

•BS2000 specific manuals:

BS2000 System Installation

BS2000 Utility Routines

BS2000 Administration and Operation

You can find further information on the use of ETERNUS DX/AF with BS2000 Servers.

•in the release notices of BS2000 Servers and Operating System at

http://manuals.ts.fujitsu.com/index.php?id=1-4

Replication functions for BS2000 volumes in ETERNUS DX/AF are provided by Fujitsu Software BS2000 SHC-

OSD and StorMan. Information on SHC-OSD can be found in the manual and release notices at

http://manuals.ts.fujitsu.com/index.php?id=1.

Tenth Edition

May 2018

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

About this Manual

Contents and Structure

This document is composed of the following seven chapters:

●Chapter 1 Workflow

This describes the workflow required to set up an ETERNUS DX/AF storage system for BS2000.

●Chapter 2 Notes

This describes issues to be noted when connecting the ETERNUS DX/AF storage system and the BS2000

Server.

●Chapter 3 Checking Prerequisites and Fibre Channel Card Information

This describes software requirements and how to get the Fibre Channel card WWNs of BS2000 Servers.

●Chapter 4 Set Up the ETERNUS DX/AF Storage System for BS2000

This describes special settings required when connecting an ETERNUS DX/AF storage system to a server

with operating system BS2000.

●Chapter 5 Set Up the BS2000 Server for ETERNUS DX/AF Storage Systems

This describes the configuration of ETERNUS DX/AF volumes on SE, S- and SQ-Servers with the

operating system BS2000.

●Chapter 6 Check the LUNs

This describes how to verify installation and configuration by means of X2000 and BS2000.

●Chapter 7 Example

Examples for the setup of ETERNUS DX/AF storage systems and BS2000 Server.

Acknowledgements

•The company names, product names and service names mentioned in this document are registered

trademarks or trademarks of their respective companies.

About this Manual

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Naming Conventions

-Product names

•BS2000 represents the following products:

•BS2000/OSD V9.0

•OSD/BC V10.0

•OSD/BC V11.0

•OSD/XC V9.0

•OSD/XC V9.5

•OSD/XC V10.0

•OSD/XC V11.0

-Other names

•"Channel Adapter" (CA) refers to the Fibre Channel interface module that is used in an ETERNUS DX/

AF storage system to connect to a server.

•"Fibre Channel card" refers to the Fibre Channel interface module that is normally used by the

server. A "Host Bus Adapter" (HBA) or "Channel Adapter" (CA) may be used instead, depending on

the server.

•Italics are used to show variables such as values and characters that appear in command

parameters and output examples.

-ETERNUS disk storage system models

The following naming conventions are used to describe ETERNUS disk storage system models in this

document.

-BS2000 servers:

The following naming conventions are used to describe BS2000 server models in this document.

ETERNUS disk storage system model Naming conventions

ETERNUS DX500 S4/DX600 S4

ETERNUS DX500 S3/DX600 S3

ETERNUS AF650/AF650 S2

ETERNUS DX8700 S3

ETERNUS DX410 S2/DX440 S2

ETERNUS DX8700 S2

ETERNUS DX/AF storage system

ETERNUS DX500 S4/DX600 S4 ETERNUS DX S4 series

ETERNUS DX500 S3/DX600 S3

ETERNUS DX8700 S3 ETERNUS DX S3 series

ETERNUS DX410 S2/DX440 S2

ETERNUS DX8700 S2 ETERNUS DX S2 series

ETERNUS AF650/AF650 S2 ETERNUS AF series

BS2000 server model Naming conventions

SE300, SE500, SE700, SE300B, SE500B, SE700B SE Server series

S175, S210 S-Server series

SQ210 SQ-Server series

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Table of Contents

Chapter 1 Workflow 8

Chapter 2 Notes 10

2.1 Installation Notes ............................................................................................................. 10

2.2 ETERNUS DX/AF Storage System Setup Notes .................................................................... 10

2.3 Server Notes ...................................................................................................................... 11

Chapter 3 Checking Prerequisites and Fibre Channel Card Information 12

3.1 ETERNUS Firmware Prerequisites ...................................................................................... 12

3.2 BS2000 Hardware Prerequisites ........................................................................................ 12

3.3 BS2000 Software Prerequisites ......................................................................................... 13

3.4 Fibre Channel Cards .......................................................................................................... 13

Chapter 4 Set Up the ETERNUS DX/AF Storage System for BS2000 14

4.1 Setting the Host Responses .............................................................................................. 14

4.2 Configuring Settings for the Fibre Channel Ports (CA Parameters) .................................... 15

4.3 Registering the WWNs of the Accessing Fibre Channel Cards ............................................ 17

4.4 Configure the RAID Groups and Create the Logical Volumes ............................................. 18

4.5 Creating the LUN Groups/Affinity Groups ........................................................................... 19

4.6 Configuring the Host Affinity ............................................................................................. 19

4.7 Setting the CA Reset Groups .............................................................................................. 20

4.8 Checking the WWNs .......................................................................................................... 20

Chapter 5 Set Up the BS2000 Server for ETERNUS DX/AF Storage Systems 21

5.1 SE Server (SU /390) ........................................................................................................... 21

5.2 S-Server ............................................................................................................................. 21

5.3 SE Server (SU x86) and SQ-Server ...................................................................................... 22

Table of Contents

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Chapter 6 Check the LUNs 23

6.1 SE Server (SU /390) and S-Server ....................................................................................... 23

6.2 SE Server (SU x86) and SQ-Server ...................................................................................... 23

Chapter 7 Example 24

7.1 Configuration and Generation of an ETERNUS DX8700 S3 for BS2000 (SE Server) ............. 24

7.2 Generation of the ETERNUS DX8700 S3 on the SE Server (SU /390) and S-Server .............. 27

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

List of Tables

Table 4.1 FC-AL connection settings (Host-direct-connection) - not for SE Server (SU /390) and S-Servers,

not for ETERNUS DX8700 S3! ....................................................................................................................... 16

Table 4.2 Fabric connection settings (Host-Fabric-connection) .................................................................................. 16

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Chapter 1

Workflow

Documents required during the workflow:

•FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel)

ETERNUS DX S4/S3 series Hybrid Storage Systems, ETERNUS AF series, ETERNUS DX200F All-Flash Arrays

Settings

•FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)

ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700 S2 Disk Storage

System Settings

•FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)

Fibre Channel Switch Settings

•Web GUI User’s Guide

•ETERNUSmgr Install Guide

•ETERNUSmgr User Guide

•Any manuals supplied with the Fibre Channel card driver and software

•BS2000 specific manuals:

SE Server: System Installation (SE Server)

Utility Routines

S-Server: System Installation

Utility Routines

SQ-Server: Business Server Operation and Administration

Workflow

Checking prerequisites and Fibre Channel Card Information

Checking software requirements and getting Fibre Channel Card information.

-"Chapter 3 Checking Prerequisites and Fibre Channel Card Information" (page 12)

Set Up the ETERNUS DX/AF Storage System for BS2000

Configure RAID Groups and Logical Volumes and do all settings in the ETERNUS in consideration

of special BS2000 settings.

-"Chapter 4 Set Up the ETERNUS DX/AF Storage System for BS2000" (page 14)

Refer

Chapter 1 Workflow

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Set Up the Fibre Channel Switch

Set up the Fibre Channel switch (if it is to be used).

Set Up the BS2000 Server for ETERNUS DX/AF

On SE Server (SU /390) and S-Server do the generation as described in manual "System

installation".

On SE Server (SU X86) or SQ-Server do the set up as described in manual "FUJITSU Server BS2000

SE300 / SE500 / SE700, Operation and Administration" or "SQ Business Server Operation and

Administration".

-"Chapter 5 Set Up the BS2000 Server for ETERNUS DX/AF Storage Systems" (page 21)

Check the LUNs

Check whether the server recognizes the LUNs of the ETERNUS DX/AF storage system.

-"Chapter 6 Check the LUNs" (page 23)

Refer

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Chapter 2

Notes

2.1 Installation Notes

•To ensure reliable access to ETERNUS DX/AF storage systems, multipath configuration is recommended.

•Setting up multiple access paths between the BS2000 Server and the ETERNUS DX/AF storage systems

provides improved access redundancy.

•Before setting up a multipath configuration, create Storage Repositories for all the LUNs that exist in the

ETERNUS DX/AF storage system.

•The ETERNUS Multipath Driver does not need to be installed for BS2000 Servers.

2.2 ETERNUS DX/AF Storage System Setup Notes

•Host Response must be set before the ETERNUS DX/AF storage system is connected to the BS2000 Server

host.

•Assign Affinity Group values starting from LUN0 in ascending order. The server cannot recognize the

ETERNUS DX/AF storage system LUNs if some other assignment order is used.

•Please be aware that only a homogeneous sharing with other BS2000 Servers is supported for FC Ports

which are connected to a BS2000 server. The combined Port Mode CA/RA and port sharing with non-

BS2000 servers are not supported in ETERNUS DX S2.

The combined Port Mode CA/RA as of ETERNUS DX S4/S3, ETERNUS AF is tolerated.

Note: In these terms the Server Unit of an SE Server (SU x86) or an SQ-Server is considered to be a BS2000

server, irrespective whether Linux/Windows guests are running or not. The Application Unit of an SE Server

or an SQ-Server is a non-BS2000 server.

•The feature Transparent failover (TFO) / Storage Cluster Option is supported for BS2000 volumes as of OSD/

BC V10 and OSD/XC V10 with SHC-OSD V13.0.

Inhaltsverzeichnis

Andere Fujitsu Lagerung Handbücher

Fujitsu

Fujitsu PRIMERGY LTO4 Bedienungsanleitung

Fujitsu

Fujitsu MHT2020AT Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX Disk Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX Disk Bedienungsanleitung

Fujitsu

Fujitsu Eternus CS800 S3 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS AB Series Technisches Handbuch

Fujitsu

Fujitsu DYNAMO 640AI Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX8100 S3 Technisches Handbuch

Fujitsu

Fujitsu Eternus DX80 S2 Bedienungsanleitung

Fujitsu

Fujitsu MAT3300NC Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS Bedienungsanleitung

Fujitsu

Fujitsu DISK DRIVES MHL2300AT Bedienungsanleitung

Fujitsu

Fujitsu MAT3300NC/NP Product/ Bedienungsanleitung

Fujitsu

Fujitsu MBA3300 NP SERIES Bedienungsanleitung

Fujitsu

Fujitsu Eternus DX80 S2 Bedienungsanleitung

Fujitsu

Fujitsu MHW2160BJ Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX S5 Series Leitfaden

Fujitsu

Fujitsu MAF3364LC - Enterprise 36.4 GB Hard Drive Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 S4 Leitfaden

Fujitsu

Fujitsu PRIMERGY PG-DTA101 Bedienungsanleitung

Fujitsu

Fujitsu MPF3XXXAT Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX80 Bedienungsanleitung

Fujitsu

Fujitsu ETERNUS DX60 Referenzhandbuch

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

HP P9000 Bedienungsanleitung