Fulterer FR 3610 Bedienungsanleitung
Step 1. Identify all parts.
Supplied Parts List
ADrawer Slide, left (cabinet, middle and drawer profile) with door front brackets.
BDrawer Slide, right (cabinet, middle and drawer profile) with door front brackets.
CBottom Mount Brackets (4 pieces).
D1 Connecting Bracket (3 pieces).
D2 Connecting Bracket with slot (3 pieces).
EE-Z-Close Package: 2 activators (L and R), 2 strikes, screws.
FTray (1 piece).
GWire Support (1piece).
Screw Package:
(g) M4 x 8mm, zinc (24 pieces).
(h) M4 Nut, zinc (8 pieces).
( i ) M4 x 8mm, zinc (11 pieces).
( j ) No. 8 x 5/8 in., zinc (10 pieces).
( k) No. 8 x 5/8 in., zinc (4 pieces).
( l ) No. 6 x 1/2 in., self-tapping, zinc (4 pieces).
( m) No. 8 x 1/2 in., self-tapping, zinc (4 pieces).
( n) Washer (2 pieces)
FR 3610 & FR 3609 Mounting Instructions
1 of 4(0708#145)
FR 3610
FR 3610
FR 3609
mm (in.)
Min. inside cabinet depth
575 (22.64)
Inside cabinet width
375–475
(14.75 –18.75)
mm (in.)
Min. inside cabinet depth
575 (22.64)
Inside cabinet width
292–475
(11.5 –18.75)
34L (36 qt.)
Waste Basket 34L (36 qt.)
Waste Basket
34L (36 qt.)
Waste Basket
Storage Bin
FR 3609 Single FR 3610 Double
E activator L
E activator R
D2
D1
B
Drawer Profile
A
Drawer Profile
FRONT
(g)
(g)
(g)
(g)
(i)
(i)
(i)
(m)
(m)
(m)
(m)
(g)
(g)
D1
D1 FR 3610
D2
D2
Figure 2
FR 3610
Figure 1
Step 4. Attach connecting brackets D1 to drawer profile A and connecting brackets D2 to
drawer profile B using screws (g) as illustrated below in figure 2. (FR 3610 only)
Step 5. Connecting brackets D1 and D2 attach to each other with screws (i). Determine the position after deciding the width
of the tray F trim the tray to fit the cabinet opening. See figure 4 and 5 for minimum and maximum tray width.
Attach wire support (G) with washer (n) and screws (i) to tray (F) (FR 3610 only)
FR 3610 & FR 3609 Mounting Instructions
2 of 4(0708#145)
B
Cabinet Profile
A
Cabinet Profile
E strike
E strike
C
C
C
C
(g)
(l)
(l)
(h)
(h)
7mm set back
from front of cabinet
(k)
(g)
(h)
(h)
(j)
Step 2. Attach E-Z-Close strikes with screws ( l) to brackets Cas illustrated below in figure 1. Attach E-Z-Close activators with
screws (m) to Drawer Profiles. L to A, R to B as illustrated in figure 2.
Step 3. Attach brackets Cto cabinet profile A left and B right with screws (g) and nuts (h) as illustrated below in figure 1.
FR 3610 & FR 3609 Mounting Instructions
3 of 4(0708#145)
E activator L
E activator R
D2
D1
B
Drawer Profile
A
Drawer Profile
FRONT
(g)
(g)
(g)
(g)
(i)
(i)
(i)
(m)
(m)
(m)
(m)
(g)
(g)
D1
D1
FR 3609
D2
D2
Step 4. (a) Attach connecting brackets D1 to drawer profile A and connecting brackets D2 to
drawer profile B using screws (g) as illustrated below in figure 2. (FR 3609 only)
Step 5. (a) Connecting brackets D1 and D2 attach to each other with screws (i). Determine the position after deciding
the width of the tray F trim the tray to fit the cabinet opening. See figure 4 and 5 for minimum and maximum
tray width. Attach wire support (G) with washer (n) and screws (i) to tray (F) (FR 3610 only)
Step 6. Determine the location of the adjustable door front brackets using diagram in figure 3 (see below).
Attach adjustable door front brackets to door front with screws ( j).
Step 7. Hook door front to fixed brackets on the slide, make all necessary adjustments and tighten all screws.
Step 8. Check alignment and function of E-Z-Close mechanism E (see figure 1).
240 (9.45)
FR 3609: 292 – 475 (11.5 –18.75)
FR 3610: 375 – 475 (14.75 –18.75)
Inside cabinet width
mm (in.)
6
0
100
(3.94)
22
38
54
70
86
102
118
134
Adjustable
Door Front Bracket
facing inward
Adjustable
Door Front Bracket
facing outward
64 (2.52)
75 (2.95)
910
Figure 2
FR 3609
Figure 3
F
Tray
Adjustable door
front bracket
max.
423mm
(16.65in.)
Tray width
Adjustable door
front bracket
G
Wire Support
F
Tray
min.
314mm
(12.36in.)
Tray width
(n)
(i)
mm (in.)
F
Tray
Adjustable door
front bracket
max.
423mm
(16.65in.)
Tray width
F
Tray
min.
248mm
(9.76in.)
Tray width
mm (in.)
Adjustable door
front bracket
FR 3610 & FR 3609 Mounting Instructions
4 of 4(0708#145)
Step 9. Mount cabinet profile A and B with attached brackets C to cabinet floor with screws ( j) and (k) use the drawer
profile / tray assembly as a gauge for distance and parallelism. Be sure that all drawer slide parts are running
freely and do not bind (see figure 1).
FR 3610
Figure 4
FR 3609
Figure 5
Dieses Handbuch passt für folgende Modelle
1
Andere Fulterer Lagerung Handbücher
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung