Furuno Multi Instrument FI-504 Bedienungsanleitung

www.furuno.co.jp

FI-504 MULTI

FI-507 MULTI XL

Instrument

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

The paper used in this manual

is elemental chlorine free.

・FURUNO Authorized Distributor/Dealer

9-52 Ashihara-cho,

Nishinomiya, 662-8580, JAPAN

Telephone : +81-(0)798-65-2111

Fax

+81-(0)798-65-4200

A : OCT 2007

Printed in Japan

D : JAN . 26, 2011

Pub. No. OME-72690-D

*00016733413**00016733413*

(DAMI ) FI-504/507

00016733413

* 0 0 0 1 6 7 3 3 4 1 3 *

IMPORTANT NOTICES

General

• This manual has been authored with simplified grammar, to meet the needs of international us-

ers.

• The operator of this equipment must read and follow the descriptions in this manual. Wrong op-

eration or maintenance can cancel the warranty or cause injury.

• Do not copy any part of this manual without written permission from FURUNO.

• If this manual is lost or worn, contact your dealer about replacement.

• The contents of this manual and equipment specifications can change without notice.

• The example screens (or illustrations) shown in this manual can be different from the screens

you see on your display. The screens you see depend on your system configuration and equip-

ment settings.

• Save this manual for future reference.

• Any modification of the equipment (including software) by persons not authorized by FURUNO

will cancel the warranty.

• All brand and product names are trademarks, registered trademarks or service marks of their

respective holders.

How to discard this product

Discard this product according to local regulations for the disposal of industrial waste. For disposal

in the USA, see the homepage of the Electronics Industries Alliance (http://www.eiae.org/) for the

correct method of disposal.

How to discard a used battery

Some FURUNO products have a battery(ies). To see if your product has a battery, see the chapter

on Maintenance. Follow the instructions below if a battery is used. Tape the + and - terminals of

battery before disposal to prevent fire, heat generation caused by short circuit.

In the European Union

The crossed-out trash can symbol indicates that all types of batteries

must not be discarded in standard trash, or at a trash site. Take the

used batteries to a battery collection site according to your national

legislation and the Batteries Directive 2006/66/EU.

In the USA

The Mobius loop symbol (three chasing arrows) indicates that Ni-Cd

and lead-acid rechargeable batteries must be recycled. Take the used

batteries to a battery collection site according to local laws.

In the other countries

There are no international standards for the battery recycle symbol. The number of symbols can

increase when the other countries make their own recycle symbols in the future.

Ni-Cd Pb

SAFETY INSTRUCTIONS

WARNING

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

Warning, Caution

Mandatory Action

Prohibitive Action

SAFETY INSTRUCTIONS

The operator of this equipment must read these safety instructions before attempting to

operate the equipment.

WARNING

Do not open the equipment.

Only qualified personnel should

work inside the equipment.

Do not disassemble or modify

the equipment.

Fire or electrical shock can result if

the equipment is modified.

Do not operate the equipment

with wet hands.

Electrical shock can result.

Safety instructions for the operator

Make sure no rain or water

splash leaks into the equipment.

Fire or electrical shock can result

if water leaks into the equipment.

Immediately turn off the power

at the switchboard if water leaks

into the equipment.

Continued use of the equipment

can cause fire or electrical shock.

Safety instructions for the installer

WARNING

Turn off the power at the switch-

board before beginning the

installation.

Turn off the power to prevent

electrical shock.

Make sure the installation site is

not subject to water spray.

Fire or electrical shock can result if

water leaks into the equipment.

CAUTION

Observe the following compass

safe distances to prevent interfer-

ence to the instruments:

Standard

compass

Steering

compass

0.35 m

FI-504

FI-507

Warning Label

A warning label is attached to the equipment. Do not

remove the label. If the label is missing or damaged,

contact a FURUNO agent or dealer about replacement.

0.30 m

0.25 m

iii

TABLE OF CONTENTS

FOREWORD.............................................................................................. iv

SYSTEM CONFIGURATION ....................................................................... v

1.OPERATION ............................................................................................. 1

1.1 Operating Controls, Display Layout...................................................................... 1

1.2 Turning the Power On/Off .................................................................................... 2

1.3 Adjusting Brilliance and Contrast ......................................................................... 2

1.4 Selecting a Display............................................................................................... 3

1.5 Selecting Apparent or True Wind Angle, Wind Speed.......................................... 8

1.6 Resetting Counters and Indications ..................................................................... 8

1.7 Alarms .................................................................................................................. 9

1.8 Timers ................................................................................................................ 11

2. MAINTENANCE, TROUBLESHOOTING .............................................. 13

2.1 Preventive Maintenance..................................................................................... 13

2.2 Troubleshooting.................................................................................................. 14

3. INSTALLATION..................................................................................... 15

3.1 Equipment Lists.................................................................................................. 15

3.2 Mounting............................................................................................................. 16

3.3 Wiring ................................................................................................................. 18

3.4 Setting Up........................................................................................................... 21

SPECIFICATIONS ................................................................................. SP-1

PACKING LIST........................................................................................ A-1

OUTLINE DRAWINGS............................................................................. D-1

INTERCONNECTION DIAGRAM ............................................................ S-1

FOREWORD

A Word to the Owner of the FI-504, FI-507

Congratulations on your choice of the FURUNO FI-504 Multi/FI-507 Multi

XL displays, members of the FI-50 series of marine instruments. We are

confident you will see why the FURUNO name has become synonymous

with quality and reliability.

For over 60 years FURUNO Electric Company has enjoyed an enviable

reputation for quality marine electronics equipment. This dedication to

excellence is furthered by our extensive global network of agents and

dealers.

This equipment is designed and constructed to meet the rigorous de-

mands of the marine environment. However, no machine can perform its

intended function unless operated and maintained properly. Please care-

fully read and follow the recommended procedures for operation and

maintenance.

Thank you for considering and purchasing FURUNO equipment.

Features

The FI-504 Multi/FI-507 Multi XL displays provide heading, environment,

autopilot, engine, depth, speed, and wind information, all on a high qual-

ity, backlit LCD. The sturdy weather-proof case is built to stand up to

even the harshest of environments.

The main features are

• Eight varieties of displays: heading, environment, autopilot, engine,

depth, speed, timer, and wind.

• Four levels of backlighting including off.

• Timers: Stopwatch and count-down

• Depth alarms: Shallow alarm, Deep alarm

• Anchor alarms: Shallow alarm, Deep alarm

• Voltage alarm monitors power source voltage

• Wind alarms: High apparent wind angle, Low apparent wind angle,

Max. true wind speed, Low true wind speed

• Speed indications: Max. STW, Average STW, SOG, Max. SOG, Aver-

age SOG, Wind speed, Max. true wind speed

• Log indication from 0 to 99,999 nm

• Resettable trip counter, from 0 to 999 nm

SYSTEM CONFIGURATION

Standalone configuration

NOTICE: Turn on the terminal resistor in the instrument when connecting

an NMEA 2000 sensor or CAN bus device. For the procedure, see the

section on setting up, in the installation chapter.

: Standard Supply

: Optional Supply

: Local Supply

12 VDC

CAN bus Device

NMEA 2000 Sensor

(ex. Smart Sensor)

FI-504 FI-507

SYSTEM CONFIGURATION

CAN bus network

NOTICE: Turn on the terminal resistor in the terminator of the CAN bus

network.

FI-501*

and/or

FI-502

FI-5001 or

FI-5001L

WIND

TRANSDUCER

TERMINAL BOX

(where necessary)

FI-503

DIGITAL

FI-504 MULTI

FI-505

COURSE PILOT

FI-506

RUDDER

: Standard Supply

: Optional Supply

: Local Supply

*FI-501 Wind Angle

FI-502 Close Hauled Wind Angle

JUNCTION BOX

FI-5002

* NMEA 2000 SENSORS

- Boat speed

- Depth

- Heading

- Navigation

- Environment

- Autopilot

- Engine

12 VDC

(not necessary if powered

by CAN bus network)

CAN bus

Device

NMEA 2000

SENSOR*

CAN bus

Device

NMEA 2000

SENSOR*

CAN bus

Device

NMEA 2000

SENSOR*

CAN bus

Device

NMEA 2000

SENSOR*

CAN bus

Device

NMEA 2000

SENSOR*

FI-507 MULTI XL

1. OPERATION

Provided applicable sensors are connected, the FI-504/FI-507 provides

the following information, all on a backlit LCD:

• Depth

• Speed

• Heading

• Environment data

• Autopilot (rudder)

•Engine

•Wind

•Timers

• Navigation data

1.1 Operating Controls, Display Layout

Note: The example screens shown in this manual are taken from the FI-

504. The screens from the FI-507 may be different.

Key name Function

SELECT/CLEAR • Select menu option.

• Silence alarm.

• Clear data.

• Reset counters and indications.

• Increment value.

APP/TRUE • Select apaprent or true (wind) alternately.

• Decrement value.

MODE Select a display.

DISP key • Turn on power.

• Select a display category.

DISP

MODE

APP

TRUE

SELECT

CLEAR

FI-507

Mode name

(Ex. SPD=Speed, DPTH=Depth)

FI-504

1. OPERATION

1.2 Turning the Power On/Off

To power the instrument, press the DISP key. All LCD segments go on

and off and then the last-used display appears.

To power off the instrument, press the DISP and MODE keys together

(about 7-10 seconds). The timer appears and counts down from three

seconds to one second, and then the power goes off.

Power OFF sequence

1.3 Adjusting Brilliance and Contrast

1. Press the DISP and MODE keys together. The display for adjustment

of brilliance appears, with current brilliance setting flashing.

2. Within seven seconds of completing step 1, press the APP/TRUE key

to lower the brilliance, or the SELECT/CLEAR key to raise it.

3. Press the DISP and MODE keys together. The display for adjustment

of contrast appears, with current contrast setting flashing.

4. Within seven seconds of completing step 3, press the APP/TRUE key

to lower the contrast, or the SELECT/CLEAR key to raise it.

5. Press the DISP and MODE keys together to save the settings and

restore normal operation.

The brilliance and contrast will be the same on all units which are syn-

chronized. (For how to synchronize units, see page 26.)

POWE

OFF

Press DISP

and MODE

keys together 3

POWER

2 1

POWERPOWER

Brilliance setting (flashing)

BRILL

Contrast setting (flashing)

CONT

Andere Handbücher für Multi Instrument FI-504

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Furuno Schiffsausrüstung Handbücher

Furuno

Furuno 520 Bedienungsanleitung

Furuno

Furuno FE-700 Bedienungsanleitung

Furuno

Furuno ETR-30N Bedienungsanleitung

Furuno

Furuno DFF1 Bedienungsanleitung

Furuno

Furuno TZT2BB Bedienungsanleitung

Furuno

Furuno FCV-1150 Bedienungsanleitung

Furuno

Furuno FCV-1100L Bedienungsanleitung

Furuno

Furuno VR-7000 Handbuch

Furuno

Furuno FI-303 Bedienungsanleitung

Furuno

Furuno VR-7000 Bedienungsanleitung

Furuno

Furuno LS-6000 Bedienungsanleitung

Furuno

Furuno TZT-3KP-F3D Bedienungsanleitung

Furuno

Furuno FCV-1500 Bedienungsanleitung

Furuno

Furuno Black Box Video Sounder FCV-1200BB Bedienungsanleitung

Furuno

Furuno FI70DSW Bedienungsanleitung

Furuno

Furuno PG500R Bedienungsanleitung

Furuno

Furuno felcom15 Bedienungsanleitung

Furuno

Furuno FMV-605 Bedienungsanleitung

Furuno

Furuno NAVNET 3D MFDBB Montageanleitung

Furuno

Furuno FCV-780/782 Bedienungsanleitung

Furuno

Furuno MF/HF DSC/Watch Receiver DSC-60 Bedienungsanleitung

Furuno

Furuno FCV-600L Bedienungsanleitung

Furuno

Furuno NAVpilot-300 Installationsanleitung

Furuno

Furuno FS-1562 Bedienungsanleitung

Beliebte Schiffsausrüstung Handbücher anderer Marken

Clarion

Clarion CMS2 Reparaturanleitung

EBS

EBS M7000 Bedienungsanleitung

Kongsberg

Kongsberg M3 Bathy Bedienungsanleitung

NPK

NPK SCS-1002 Bedienungsanleitung

Harken

Harken 1561 Bedienungsanleitung

Simrad

Simrad DD15 Bedienungsanleitung

Notifier

Notifier FS-BSO Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

E2S

E2S E2XS112UL Bedienungsanleitung

R2Sonic

R2Sonic 2026 Bedienungsanleitung

COBHAM

COBHAM SAILOR 6000 Bedienungsanleitung

Raymarine

Raymarine Maxiview ST80 Benutzerhandbuch

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Montageanleitung

Raymarine

Raymarine ST60 Tridata Benutzerhandbuch

Sonic

Sonic 2024 Bedienungsanleitung

Quicksilver

Quicksilver 88688A25 Handbuch

olympia electronics

olympia electronics ΒS-532/WP Bedienungsanleitung

olympia electronics

olympia electronics ΒS-531/1/MAR Bedienungsanleitung