Furuno SCX-21 Installationsanleitung

FAQ

SCX20 FAQ

Q How can the SCX21 be mounted?

The SCX21 comes standard with a pole mount kit. This kit supports a 1” NPT.

Optional mast mount kit is also available. Part # 001-556-240-00. This kit is used

in combination with the pole mount kit.

The SCX21 can also be surface mounted. Please see the installation manual for

full details.

Q What are the physical dimensions of the SCX21?

3”H x 8”W x 10”L (without pole mount attachment). 2.2lbs

Q What type of connector does the SCX21 use?

The SCX21 uses a 16pin proprietary connector.

Q What connection cable is the SCX21 supplied with?

The SCX21 is supplied with a 15-meter serial data/power pigtail cable. A 30-meter cable is

optional. Part # 001-555-570.

Q How many I/O ports does the SCX20 have?

The SCX21 has one Three (3) NMEA0183 ports. Two (2) NMEA0183 input ports, and one PPS

port for WASSP.

Q What voltage can the SCX21 operate from?

The operating voltage of the SCX21 is 12vdc to 24vdc.

Q What NMEA0183 sentences does the SCX21 output/Input?

Q Sample connection diagram.

Q When the GP39 is connected to the SCX21, what additional displays are

available on the GP39?

Q Does the SCX21 output Heave information for my Furuno Sounder?

Yes, the SCX21 outputs Heave along with pitch and roll.

Q What is the update rate of the SCX20 position/heading information?

The SCX21 updates position and heading at 10hz.

Q Can the output rate be changed and or individual sentences turned off?

Yes. Sentence output rates can be individually changed or turned off completely using a

connected GP39, or via a PC running Tool software.

Q Is the SCX21 compatible with the TZtouch2/3 sensor management

menu?

No. TZT2/3 Sensor management is done over the NMEA2000 bus. The SCX21 is not a

NMEA2000 device.

Q Is the SCX21 affected by GPS blockage and or multipath?

Any GPS sensor or satellite heading sensor can be affected by blockage and or multipath. The

SCX21 decreases these affects by using 4 internal GNSS antennas creating 6 baselines, the

most currently available on the market, for measurement. While the SCX21 can use all 6

baselines for heading, it does not have to. It can calculate heading using only two baselines.

The chance that all 6 baselines would be affected by multipath is decreased. This makes the

SCX21 much more resistant to these issues.

Q What satellite systems is the SCX21 compatible with?

The SCX20 is compatible with GPS, Galileo (EU), GLONASS (Russia), and QZSS (Japan and

Oceania). The SCX20 will track multiple GNSS Satellite Systems for heading calculation.

Q Is the SCX21 compatible with any SBAS systems?

The SCX21 is compatible with the following Satellite Based Augmentation Systems.

Q How can offsets and changes be made to the SCX21?

Offsets and changes can be made to the SCX21 via a GP39, or by a PC running SCX20 Tool

software. Slight heading corrections can also be made by physically adjusting (port or

starboard) the SCX21 antenna. The PC Tool software can also monitor the status of the

SCX21, such as condition, signal reception and blockage condition of all the antennas.

Q How is the SCX21 connected when used with the PC Tool software?

A PC is connected to either Port 1 or 3 using a USB 422/485 converter.

Q Is the SCX21 compatible with the IF-NMEASC?

No. The SCX21 is not compatible with the IF-NMEASC. However, you could use the SCX21 to replace

an SC30/IF-NMEASC installation.

Q What options are available for the SCX21?

Options include mast mount kit, Bird repellents, Snow cover kit, GP39. For a complete list of

available options, please visit the accessories page of the SCX21 on the Furuno USA website.

Rev. February 19, 2020

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Furuno Schiffsausrüstung Handbücher

Furuno

Furuno DSC-6 Bedienungsanleitung

Furuno

Furuno FE-881 II Bedienungsanleitung

Furuno

Furuno GP-1810F Bedienungsanleitung

Furuno

Furuno DS-50 Bedienungsanleitung

Furuno

Furuno FICE-100 Bedienungsanleitung

Furuno

Furuno FE-606 Bedienungsanleitung

Furuno

Furuno FCV-295 Bedienungsanleitung

Furuno

Furuno FE-800 Bedienungsanleitung

Furuno

Furuno NavNet TZtouch3 Series Bedienungsanleitung

Furuno

Furuno FMD3100 Bedienungsanleitung

Furuno

Furuno CN-24 Bedienungsanleitung

Furuno

Furuno LS-4100 Bedienungsanleitung

Furuno

Furuno TZT-3KP-F3D Bedienungsanleitung

Furuno

Furuno FA-170 Handbuch

Furuno

Furuno BBWX4 SiriusXM Installationsanleitung

Furuno

Furuno FELCOM251 Bedienungsanleitung

Furuno

Furuno FCV-360 Bedienungsanleitung

Furuno

Furuno GP-1650DF Bedienungsanleitung

Furuno

Furuno GP-1670F Bedienungsanleitung

Furuno

Furuno FCV-30 Bedienungsanleitung

Furuno

Furuno TZT2BB Bedienungsanleitung

Furuno

Furuno SC-33 Bedienungsanleitung

Furuno

Furuno VR-7000 Handbuch

Furuno

Furuno Network Sounder DFF3 Bedienungsanleitung

Beliebte Schiffsausrüstung Handbücher anderer Marken

Clarion

Clarion CMS2 Reparaturanleitung

EBS

EBS M7000 Bedienungsanleitung

Kongsberg

Kongsberg M3 Bathy Bedienungsanleitung

NPK

NPK SCS-1002 Bedienungsanleitung

Harken

Harken 1561 Bedienungsanleitung

Simrad

Simrad DD15 Bedienungsanleitung

Notifier

Notifier FS-BSO Bedienungsanleitung

Raymarine

Raymarine ST40 Bedienungsanleitung

E2S

E2S E2XS112UL Bedienungsanleitung

R2Sonic

R2Sonic 2026 Bedienungsanleitung

COBHAM

COBHAM SAILOR 6000 Bedienungsanleitung

Clarion

Clarion GR10BT Reparaturanleitung

Raymarine

Raymarine Maxiview ST80 Benutzerhandbuch

GUIDANCE MARINE

GUIDANCE MARINE 20- Series Montageanleitung

Raymarine

Raymarine ST60 Tridata Benutzerhandbuch

olympia electronics

olympia electronics ΒS-531/1/MAR Bedienungsanleitung

Sonic

Sonic 2024 Bedienungsanleitung

Quicksilver

Quicksilver 88688A25 Handbuch