Furuno Mu 120c Bedienungsanleitung

MULTI-PURPOSE LCD DISPLAY

MU-120C

SAFETY INSTRUCTIONS

Safety Instructions for the Operator

WARNING

Do not open the equipment.

Only qualified personnel

should work inside

the equipment.

Do not disassemble or modify the

equipment.

Fire, electrical shock or serious injury can

result.

Use the proper fuse and power cable.

Fuse rating is shown on the equipment.

Use of a wrong fuse can result in damage

to the equipment.

Immediately turn off the power at the

switchboard if the equipment is emitting

smoke or fire.

Continued use of the equipment can cause

fire or electrical shock. Contact a FURUNO

agent for service.

CAUTION

A warning label is attached to the

equipment. Do not remove the label.

If the label is missing or damaged,

contact a FURUNO agent or dealer.

WARNING

To avoid electrical shock, do not

remove cover. No user-serviceable

parts inside.

Name: Warning Label (2)

Type: 03-129-1001

Code No.: 100-236-741

WARNING

Do not open the cover

unless totally familiar with

electrical circuits and

service manual.

Improper handling can result

in electrical shock.

Turn off the power at the switchboard

before beginning the installation.

Fire or electrical shock can result if the

power is left on.

Do not install the equipment where it

may get wet from rain or water splash.

Water in the equipment can result in fire,

electrical shock or damage to the equip-

ment.

Safety Instructions for the Installer

CAUTION

Observe the following compass safe

distances to prevent interference to a

magnetic compass:

When lifting the display unit, hold it

together with the cover.

Grasping by the cover alone may allow

the display unit to fall, resulting in possible

bodily injury or damage to the equipment.

LCD Monitor MU-120C

Standard Steering

compass compass

0.3 m 0.3 m

Remote Controler

RMC-200

0.75 m 0.5 m

Do not connect/disconnect the signal

cable while turning the power on.

The unit may be damaged.

TABLE OF CONTENTS

FOREWARD.........................................................................................................iii

SYSTEM CONFIGURATION................................................................................ iv

EQUIPMENT LISTS.............................................................................................. v

1. MOUNTING.......................................................................................................1

1.1 Display Unit..................................................................................................................... 1

1.2 Remote Controller ...........................................................................................................4

2. WIRING .............................................................................................................5

3. ADJUSTMENTS................................................................................................7

3.1 RGB/DVI Setting .............................................................................................................7

3.2 VIDEO Setting.................................................................................................................9

3.3 Menu Window Setting ...................................................................................................10

3.4 Remote Controller Setting .............................................................................................12

4. OPERATION....................................................................................................13

4.1 Controls......................................................................................................................... 13

4.2 Adjusting Display Brilliance............................................................................................15

4.3 Choosing Source for Main Picture.................................................................................16

4.4 Choosing Source for Picture-in-Picture..........................................................................17

5. MAINTENANCE, TROUBLESHOOTING .......................................................18

5.1 Maintenance..................................................................................................................18

5.2 Troubleshooting.............................................................................................................19

5.3 Clearing the Memory ..................................................................................................... 20

SPECIFICATIONS...........................................................................................SP-1

PACKING LISTS ............................................................................................... A-1

OUTLINE DRAWINGS...................................................................................... D-1

INTERCONNECTION DIAGRAM ......................................................................S-1

iii

FOREWORD

A Word to the Owner of the MU-120C

FURUNO Electric Company thanks you for purchasing the MU-120C 12.1” Multi-Purpose

LCD Display. We are confident you will discover why the FURUNO name has become

synonymous with quality and reliability.

For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for

quality and reliability throughout the world. This dedication to excellence is furthered by our

extensive global network of agents and dealers.

Your equipment is designed and constructed to meet the rigorous demands of the marine

environment. However, no machine can perform its intended function unless properly

installed and maintained. Please carefully read and follow the operation, installation and

maintenance procedures set forth in this manual.

We would appreciate feedback from you, the end-user, about whether we are achieving our

purposes.

Thank you for considering and purchasing FURUNO.

Features

• Main or remote display for radars, video sounders, sonars, plotter. Compatible

equipment: FAR-21X7 series, MODEL1833C/1833C-BB series (NavNet), FCV-1200L,

CH-250, CH-270, CSH-5L/8L, GD/GP-280/380/680, etc.

• High resolution display of 800 x 600dot (SVGA)

• Brightness of 1,000 cd/m2(maximum) and 5 cd/m2(minimum) for comfortable viewing

day and night

• Landscape orientation

• Wide viewing angle for observation by more than one person

• Picture-in-picture function

SYSTEM CONFIGURATION

12-24VDC

CCDcamera,

Videorecorder,etc.

FAR-2107seriesetc.

Radar,VideoPlotter,

Navigator,VideoSounder,

ScanningSonar,etc.

RGB

DVI

VIDEO(NTSC/PAL)

Connectable equipment

Equipment Resolution Signal

FR-1510 MK3 series XGA Analog

FCV-1200L* VGA Analog, via IF8000

GD/GP-280/380/680 VGA Analog

CH-250 VGA Analog, via IF8000

CH-270 VGA Analog, via IF8000

CSH-5L/8L XGA Analog

FSV-24/24S/30/30S SXGA Analog

FR-21X5 series SXGA Analog

FAR-21X7 series SXGA DVI

FEA-2107 SXGA DVI

MODEL 1833C series VGA Analog

MODEL 1833C-BB series VGA Analog

*= Not available for the portrait type.

Note: The resolution of MU-120C is SVGA. VGA, XGAand SXGA signal may not be sharp

in character or scan line.

The TFT LCD is constructed using the

latest LCD techniques, and displays

99.99% of its pixels. The remaining 0.01%

of the pixels may drop out or blink, how-

ever this is not an indication of malfunc-

tion.

About the TFT LCD

EQUIPMENT LISTS

Standard supply

Name Type Code No. Qty Remarks

Display Unit MU-120C −1 w/LCD cover

Remote Controller RMC-200 −1

Spare Parts* SP19-00101 001-403-170 1 set

Installation Materials* CP19-00100 000-012-630 1 set Power cable

Accessories* FP19-00601 001-403-200 1 set

Option

Name Type Code No. Qty Remarks

Hanger FP19-00700 001-403-240 1 w/knob, self-tapping screws

000-146-500 1 Cable length: 5 m

3COX-2P-6C 000-146-501 1 Cable length: 10 m

Cable Assy

DVI-D/D SINGLELINK5M 000-149-054 1 Cable length: 5 m

* = See packing list at end of manual.

1 MOUNTING

Refer to the outline drawing at the end of the manual for mounting dimensions.

Note: A grass plate covers the LCD. For this reason, handle the unit carefully.

1.1 Display Unit

The display unit may be mounted on a desktop (optional hanger required) or flush mounted

in a panel.

When selecting a mounting location, keep in mind the following points:

• Locate the unit out of direct sunlight.

• Select a location where the display can be easily viewed and the controls can be easily

operated.

• Leave sufficient space around the unit for servicing and maintenance. See the outline

drawing for minimum servicing space.

• The unit weighs 5.4 kg (flush mounting)/6.3 kg (desktop mounting). Be sure the

mounting location is strong enough to support the weight of the unit.

• Locate the unit away from areas subject to water splash and rain.

Flush mounting

See the outline drawing at the end of the manual for mounting dimensions.

CAUTION

Holdthecoveranddisplayunit

togetherwhenliftingthedisplayunit.

Thedisplayunitmayfalloutifonlythe

coverisheld.

1. Remove the LCD cover from the unit.

2. Using the paper template supplied in the installation materials, make a cutout in the

mounting location.

3. Insert the display unit to the cutout, and fasten the display unit to the mounting location

with four self-tapping screws (5X30, supplied as accessories).

Note: Hex head bolts may also be used to fasten the display unit. However, their lengths

must be at least 30 mm.

Waterproofing: IP20

Waterproofing: IPX5

110

Cosmetic cap

Mounting dimensions

4. Attach the cosmetic caps (supplied as accessories) to the display unit at the locations

shown in the drawing above.

Andere Handbücher für Mu 120c

Inhaltsverzeichnis

Andere Furuno Monitor Handbücher

Furuno

Furuno MU-155C Handbuch

Furuno

Furuno NavNet TZtouch3 Series Bedienungsanleitung

Furuno

Furuno FMD-3200 Handbuch

Furuno

Furuno MU-152HD Bedienungsanleitung

Furuno

Furuno ECDIS FEA-2100 Bedienungsanleitung

Furuno

Furuno FEA-2107-BB Bedienungsanleitung

Furuno

Furuno NAVNET TZTOUCH2 TZTL15F Bedienungsanleitung

Furuno

Furuno TZT16F Bedienungsanleitung

Furuno

Furuno MU-170C Handbuch

Furuno

Furuno TZT9F Bedienungsanleitung

Furuno

Furuno FMD-1800 Bedienungsanleitung

Furuno

Furuno TZT12F Bedienungsanleitung

Furuno

Furuno NAVNET TZ2 TZTL12F Bedienungsanleitung

Furuno

Furuno FMD-1712 Bedienungsanleitung

Furuno

Furuno MFD12 Bedienungsanleitung

Furuno

Furuno MFD8 Handbuch

Furuno

Furuno MFDBB Bedienungsanleitung

Furuno

Furuno MU-170C Handbuch

Furuno

Furuno Multi Instrument FI-504 Bedienungsanleitung

Furuno

Furuno FMD3100 Bedienungsanleitung

Furuno

Furuno MU-170C Bedienungsanleitung

Furuno

Furuno TZT9 Bedienungsanleitung

Furuno

Furuno MU-155C Bedienungsanleitung

Furuno

Furuno TZT9 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

LG M1950D-PZ Bedienungsanleitung