Furuno MU-200 Bedienungsanleitung

MULTI-PURPOSE LCD DISPLAY

MU-200C

9-52, Ashihara-cho,

Nishinomiya, Japan

Telephone: 0798-65-2111

Telefax: 0798-65-4200

Your Local Agent/Dealer

PUB. No. OME-20260

MU-200C

(HIMA)

FIRST EDITION :DEC. 2001

B1 :MAY 20, 2002

Printed in Japan

SAFETY INSTRUCTIONS

Safety Instructions for the Operator

WARNING

Do not open the equipment.

Only qualified personnel

should work inside

the equipment.

Do not disassemble or modify the

equipment.

Fire, electrical shock or serious injury can

result.

Use the proper fuse.

Fuse rating is shown on the equipment.

Use of a wrong fuse can result in damage

to the equipment.

Immediately turn off the power at the

switchboard if the equipment is emitting

smoke or fire.

Continued use of the equipment can cause

fire or electrical shock. Contact a FURUNO

agent for service.

CAUTION

A warning label is attached to the

equipment. Do not remove the label.

If the label is missing or damaged,

contact a FURUNO agent or dealer.

WARNING

To avoid electrical shock, do not

remove cover. No user-serviceable

parts inside.

Name: Warning Label (1)

Type: 03-129-1001-1

Code No.: 100-236-741

WARNING

Do not open the cover

unless totally familiar with

electrical circuits and

service manual.

Improper handling can result

in electrical shock.

Turn off the power at the switchboard

before beginning the installation.

Fire or electrical shock can result if the

power is left on.

Do not install the equipment where it

may get wet from rain or water splash.

Water in the equipment can result in fire,

electrical shock or damage to the equip-

ment.

CAUTION

Observe the following compass safe

distances to prevent interference to a

magnetic compass:

Locate the MU-200C out of direct sun-

light for optimum viewing.

When lifting the display unit, hold it

together with the cover.

Grasping by the cover alone may allow

the display unit to fall, resulting in

possible injury or damage to the equipment.

Ground the equipment to

prevent mutual interference.

MU-200C

Standard Steering

compass compass

2.5 m 1.4 m

Safety Instructions for the Installer

TABLE OF CONTENTS

FOREWORD.........................................................................................................iii

SYSTEM CONFIGURATION................................................................................iv

EQUIPMENT LISTS ..............................................................................................v

1INSTALLATION ................................................................................................1

1.1 Installing the Display Unit ................................................................................................1

2WIRING.............................................................................................................4

2.1 Wiring External Equipment ..............................................................................................4

3ADJUSTMENTS ...............................................................................................7

3.1 Picture Adjustment...........................................................................................................7

3.2 RGB Adjustment..............................................................................................................9

3.3 Brilliance..........................................................................................................................9

4OPERATION...................................................................................................10

5MAINTENANCE, TROUBLESHOOTING.......................................................11

5.1 Maintenance.................................................................................................................. 11

5.2 Troubleshooting.............................................................................................................12

APPENDIX.......................................................................................................AP-1

Parts Location .................................................................................................................AP-1

Parts List .........................................................................................................................AP-2

Interconnection Diagram .................................................................................................AP-3

Modification for Switching from Landscape to Portrait Orientation ...................................AP-4

SPECIFICATIONS...........................................................................................SP-1

PACKING LIST

OUTLINE DRAWING

INTERCONNECTION DIAGRAM

SCHEMATIC DIAGRAMS

iii

FOREWORD

A Word to the Owner of the MU-200C

FURUNO Electric Company thanks you for purchasing the MU-200C 20.1” Multi-Purpose

LCD Display. We are confident you will discover why the FURUNO name has become

synonymous with quality and reliability.

For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for

quality and reliability throughout the world. This dedication to excellence is furthered by our

extensive global network of agents and dealers.

Your equipment is designed and constructed to meet the rigorous demands of the marine

environment. However, no machine can perform its intended function unless properly

installed and maintained. Please carefully read and follow the operation, installation and

maintenance procedures set forth in this manual.

We would appreciate feedback from you, the end-user, about whether we are achieving our

purposes.

Thank you for considering and purchasing FURUNO.

Features

•

Main or remote display for radars, video sounders, sonars and position-fixing equipment.

Compatible equipment: FR-2105B Series, FCV-1200 series, FCV-1500 series, FSV-24,

GD-280/360/380, etc.

•

High resolution display of 1280 X 1024 dot (SXGA), 640 X 480 dot (VGA)

•

Brightness of more than 200 cd/m

for comfortable viewing day and night

•

Landscape or portrait orientation

•

Wide viewing angle of 160° for observation by more than one person

SYSTEM CONFIGURATION

100 - 240 VAC

Navigator (GPS, etc.)*

Control unit of

Vi eo Soun er

(e.g., FCV-1200 series)

Ra ar, Vi eo Plotter,

Navigator, Vi eo Soun er,

Scanning Sonar, etc.

Equipment Category: Protecte

* = When using the FCV-1200 series,

NMEA 0183 ata may be input to the

processor unit of the echo soun er,

via the MU-200C.

NMEA 0183

RGB

Connectable equipment

MU-200C Display Unit Type

Equipment

Landscape Portrait*

FR-2105B Series Yes No

FCV-1200 Series Yes Yes (Modification required)

FCV-1500 Series No Yes (Modification required)

FSV-24 Yes No

GD/GP-280/380/680 Yes No

*=Display should not be viewed with polarized sunglasses.

EQUIPMENT LISTS

Standard supply

Name Type Code No. Qty Remarks

Display Unit MU-200C −1

Spare Parts SP10-02803 001-414-950 1set

Installation Materials CP10-05001001-414-550 1set

Accessories FP10-02501001-414-490 1set

See list at end of manual

Optional equipment

Name Type Code No. Qty Remarks

Hood (Landscape) FP10-02612 001-414-770 1

Hood (Portrait) FP10-02613 001-414-790 1

This page is intentionally left blank.

1 INSTALLATION

Refer to the outline drawing at the end of the manual for mounting dimensions.

Note: The LCD is made of glass. Handle it with care.

1.1 Installing the Display Unit

The display unit is designed to be flush mounted in a console. When selecting a mounting

location, keep in mind the following points:

• Locate the unit out of direct sunlight.

• Select a location where the display can be easily viewed and the controls can be easily

operated.

• Leave sufficient space around the unit for servicing and maintenance. See the outline

drawing for recommended servicing space.

• The unit weighs 50.7 lbs (23 kg). Be sure the mounting location is strong enough to

support the weight of the unit.

• Locate the unit away from areas subject to water splash and rain.

Procedure

1. Using the paper template supplied in the installation materials, make a cutout in the

mounting location. (Modification of the LCD may be necessary depending on equipment

used. See the table on page iv and “Modification for Switching from Landscape to

Portrait Orientation” in the Appendix for details.)

2. Pull the display unit cover toward you to detach it.

CAUTION

Hold the cover and display unit

together.

The display unit may fall if only the cover

is held.

Cover Display Unit

Display unit and cover

3. Fasten the display unit to the mounting location with eight tapping screws (5X30).

Note: Hex head bolts may also be used to fasten the display unit. However, their length

must be at least 30 mm.

45 115 100

501

0.5

483

440

0.5

422

346

0.5

226

49 113

45 115 100

501

0.5

483

440

0.5

422

346

0.5

226

49 113

Mounting dimensions for landscape orientation Mounting dimensions for portrait orientation

Unit: mm Unit: mm

Mounting dimensions

4. Reattach the cover.

5. For the portrait model only, attach the FURUNO logo seal (supplied) at the top left

corner. (Remove the logo seal at the bottom left corner.)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Furuno Monitor Handbücher

Furuno

Furuno FMD-1712 Bedienungsanleitung

Furuno

Furuno MU-152 Bedienungsanleitung

Furuno

Furuno MU-151C Bedienungsanleitung

Furuno

Furuno RD-50 Bedienungsanleitung

Furuno

Furuno FMD-1800 Bedienungsanleitung

Furuno

Furuno MU-150HD Bedienungsanleitung

Furuno

Furuno MFD12 Bedienungsanleitung

Furuno

Furuno TZT9 Bedienungsanleitung

Furuno

Furuno MU-190V Bedienungsanleitung

Furuno

Furuno SFD-1010 Handbuch

Furuno

Furuno FMD3100 Bedienungsanleitung

Furuno

Furuno TZTL12F Handbuch

Furuno

Furuno Mu-190HD Bedienungsanleitung

Furuno

Furuno FEA-2107-BB Bedienungsanleitung

Furuno

Furuno TZT9 Bedienungsanleitung

Furuno

Furuno FMD1920C Bedienungsanleitung

Furuno

Furuno MU-190 Bedienungsanleitung

Furuno

Furuno Multi Instrument FI-504 Bedienungsanleitung

Furuno

Furuno NAVNET 3D MFDBB Bedienungsanleitung

Furuno

Furuno TZT12F Handbuch

Furuno

Furuno ECDIS FEA-2100 Bedienungsanleitung

Furuno

Furuno TZT19F Bedienungsanleitung

Furuno

Furuno NAVNET TZTOUCH2 TZTL15F Installationsanleitung

Furuno

Furuno NAVnet 1722 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

LG M1950D-PZ Bedienungsanleitung