Furuno BR-1000 Bedienungsanleitung

www.furuno.co.jp

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Installation Manual

BRIDGE ALARM SYSTEM BR-1000

SAFETY INSTRUCTIONS.............................................................................................................i

SYSTEM CONFIGURATION........................................................................................................ii

EQUIPMENT LISTS.....................................................................................................................iii

1. HOW TO INSTALL THE EQUIPMENT.................................................................................1-1

1.1 Bridge Panel....................................................................................................................1-1

1.2 Processor Unit.................................................................................................................1-3

1.3 Cabin Panel, Timer Reset Panel.....................................................................................1-4

1.4 AC-DC Power Supply......................................................................................................1-5

1.5 Watertight Timer Reset Panel.........................................................................................1-6

2. HOW TO CONNECT EXTERNAL EQUIPMENT ..................................................................2-1

2.1 Connections Inside the Processor Unit...........................................................................2-1

2.2 AC-DC Power Supply......................................................................................................2-5

2.3 Connection of ALARM IN/REMOTE ACK OUT/LOCAL ACK IN/

OPERATOR FITNESS IN Signals...................................................................................2-7

3. HOW TO SET AND CHECK THE SYSTEM .........................................................................3-1

3.1 How to Set and Connect the PC for Maintenance ..........................................................3-1

3.2 Settings for Bridge Panel BR-1010.................................................................................3-3

3.3 Settings for Processor Unit BR-1020............................................................................3-25

3.4 System Operation Check..............................................................................................3-30

3.5 Service Menu................................................................................................................3-34

3.6 How to Edit the Alarm List.............................................................................................3-42

APPENDIX 1 JIS CABLE GUIDE...........................................................................................AP-1

PACKING LISTS.......................................................................................................................A-1

OUTLINE DRAWINGS..............................................................................................................D-1

INTERCONNECTION DIAGRAMS........................................................................................... S-1

PROCESSOR UNIT CONNECTION LISTS.............................................................................. S-3

Thepaperusedinthismanual

iselementalchlorinefree.

・FURUNOAuthorizedDistributor/Dealer

9‑52Ashihara‑cho,

Nishinomiya,662‑8580,JAPAN

Telephone: +81‑(0)798‑65‑2111

Fax:

+81‑(0)798‑65‑4200

SEP

2009

PrintedinJapan

Allrightsreserved.

Pub.No.

IME‑44500‑A

*00016918910**00016918910*

(

DAMI

)

BR‑1000

00016918910

*00016918910*

SAFETY INSTRUCTIONS

WARNING

Indicates a condition that can cause death or serious injury if

not avoided.

CAUTION

Indicates a condition that can cause minor or moderate injury if

not avoided.

Mandatory Action

Prohibitive Action

Read these safety instructions before you install the equipment.

WARNING

Do not open the equipment unless

authorized.

This equipment uses high voltage which

can cause electrical shock if mishandled.

Turn off power at switchboard before

starting the installation.

Fire or electrical shock can result if the

power is on.

Be sure to connect to the correct power

supply.

Connection to a wrong power supply

can cause fire or bodily injury.

Do not disassemble or modify the

equipment.

Fire, electrical shock or bodily injury can

result.

Securely ground (protection earth)

the equipment.

Ineffective ground can cause electrical

shock.

Use the correct fuse.

Use of a wrong fuse can cause fire.

Follow the compass safe distances

shown in the table below to prevent

interference to a magnetic compass.

CAUTION

Warning, Caution

Standard

compass Steering

compass

Unit

0.70 m

BR-1010 0.45 m

1.15 m

0.30 m

1.85 m

0.30 m

0.60 m

0.90 m

BR-1020

BR-1030

BR-1040

BR-1060

PR-240

SYSTEM CONFIGURATION

BRIDGE PANEL

BR-1010

VDR

GPS

24 VDC

1 - 4 units

Autopilot (2 lines)

IAS (2 lines)

External Siren

REMOTE ACK OUT (12 lines)

LOCAL ACK IN

(12 lines)

OPERATOR FITNESS IN (7 lines)

ALARM IN (48 lines)

SYSTEM FAIL OUT (2 lines)

4 - 14 units

- Dashed lines indicate optional equipment.

- Environment category: All units protected from weather.

AC-DC

POWER SUPPLY

PR-240

ETHERNET HUB

HUB-101 PROCESSOR UNIT

BR-1020

CABIN PANEL

BR-1030 TIMER RESET PANEL

BR-1040

WATERTIGHT TIMER

RESET PANEL

BR-1060

100-115/

200-230 VAC

PROCESSOR UNIT

BR-1020

iii

EQUIPMENT LISTS

Standard Supply

Name Type Code No. Qty Remarks

Bridge Panel BR-1010 - 1

Processor Unit BR-1020 - 1

Cabin Panel BR-1030 - - 4-14 units

Timer Reset

Panel BR-1040 - - 1-4 units

AC-DC Power

Supply Unit PR-240 - 1

Installation

Materials CP24-01300 000-013-149 1 Cable MJ-A3SPF0013-035 (000-

135-397) + CP24-01301. See

packing list at back of manual.

CP24-01401 001-041-390 - For BR-1030, BR-1040.

See packing list at back of manual.

CP24-00151 005-931-190 - For PR-240.See packing list at

back of manual.

Spare Parts SP24-00301 001-041-310 1 Fuse

FGB0-A 125V 3A PBF, 2 pcs.

(000-155-850-10)

Optional Supply

Name Type Code No. Remarks

Watertight Timer

Reset Panel BR-1060 - Installation Materials CP24-

010501. See packing list at

back of manual.

Processor Unit BR-1020 -

Cabin Panel BR-1030 -

Timer Reset Panel BR-1040 -

Ethernet Hub HUB-101 -

Hanger FP24-00500 000-013-160 For BR-1000

Cable Assy. MJ-A6SPF0003-050C 000-154-054-10 For VDR, 5 m

MJ-A6SPF0003-100C 000-154-036-10 For VDR, 10 m

MJ-A7SPF0007-050C 000-154-028-10 For GPS, 5 m

MJ-A7SPF0010-100C 000-159-681-10 For GPS, 10 m

LAN Cable Set CP03-28900 000-082-658 10 m cable, two connectors

CP03-28910 000-082-659 20 m cable, two connectors

CP03-28920 000-082-660 30 m cable, two connectors

1-1

1. HOW TO INSTALL THE

EQUIPMENT

Install the equipment following the points shown below.

• Select a location where the temperature and humidity are moderate and stable.

• Keep the equipment away from the exhaust vents.

• Provide ventilation to keep the equipment cool.

• Select a location where vibration and shock are minimal.

• Leave space at the sides and rear of the unit for maintenance.

• Follow the safe compass distances on page i to prevent the interference to a mag-

netic compass.

1.1 Bridge Panel

Flush mount

Fasten the Bridge Panel to the cutout with the hardware supplied.

1. Prepare a cutout in a console. See the outline drawing and the illustration shown

below for dimensions.

NOTICE

Do not apply paint, anti-corrosive sealant

or contact spray to coating or plastic

parts of the equipment.

Those items contain organic solvents that

can damage coating and plastic parts,

especially plastic connectors.

61±0.5

(2.40±0.02) 110±0.5

(4.33±0.02)

118±1

(4.64±0.04)

221±1

(8.70±0.04)

4.5

(0.18)

R2.25

(0.09)

61±0.5

(2.40±0.02)

63.5±0.5

(2.50±0.02)

63.5±0.5

(2.50±0.02)

Dimensions in millimeters (inches)

1. HOW TO INSTALL THE EQUIPMENT

1-2

2. Screw in six threaded rods (supplied) at the back of the unit.

3. Attach the flush mounting sponge (supplied) at the rear of the unit.

4. Set the unit to the cutout.

5. From the rear side, fasten the unit to the console panel with six sets of flat wash-

ers, spring washers and hexagonal nuts.

Desktop mount (optional hanger)

The optional hanger lets you install the Bridge Panel on a desktop.

1. Fasten the hanger with four 5x20 self-tapping screws (supplied).

2. Screw the knobs into the unit.

3. Set the unit to the hanger then tighten the knobs.

Threaded Rod

Flat Washer

Spring Washer

Hexagonal Nut

Flush

Mounting

Sponge

30°

264(10.39)

178(6.97)

196±3(7.72±0.12)

85±0.5

(3.35±0.02)

122(4.80)

4-φ6(0.24)

Fixing Hole

123(4.84)

Dimensions in millimeters (inches)

264(10.39)

1. HOW TO INSTALL THE EQUIPMENT

1-3

1.2 Processor Unit

A maximum of two processor units can be installed, including the optional unit. To in-

stall the no. 2 processor unit, the Ethernet Hub HUB-101 is required. (For additional

information, see the instruction manual (C4200707) for the HUB-101.)

Fasten the processor unit to a bulkhead or the deck as shown below.

1. Make four pilot holes for φ10 coach bolts or four fixing holes for M10 bolts. See the

drawing below for mounting dimensions.

2. Fasten the unit with φ10 coach bolts or M10 bolts. (Supply bolts locally.)

Bulkhead mounting dimensions for the processor unit

354(13.94)

368±1(14.49±0.04)

392(15.43)

360±1(14.17±0.04)

12(0.47)

(0.24)

158(6.22)

2-φ11(0.43)

360±1(14.17±0.04)

155(6.10)

12(0.47)

21(0.83)

Fixing Hole

Dimensions in millimeters (inches)

1. HOW TO INSTALL THE EQUIPMENT

1-4

1.3 Cabin Panel, Timer Reset Panel

The Cabin Panel and Timer Reset Panel have the same dimensions. Flush-mount the

units as shown below.

A maximum of 10 channels of Cabin Panels connect to one Processor Unit. (Four of

the 10 channels can be connected in parallel for a total of 14 channels.) Install the 10

channels of Cabin Panels in the Captain’s quarters, the back-up navigation officers’

quarters, and public areas. The system has five channels to test wire continuity in the

Cabin Panels. Install Cabin Panels in the captain’s quarters and officers’ quarters in-

dependently to conduct the wiring continuity test independently.

1. Prepare a cutout in the location. See the outline drawing and the figure shown

below for dimensions.

2. Unfasten four screws from the front side of the unit to remove the rear cover.

3. Put the connection cable through one of the two rubber bushes and set the rear

cover to the cutout. (Select the rubber bush most suitable for your installation.)

4. Fasten the rear cover with four 4x16 self-tapping screws (supplied).

5. Detach the WAGO connector from the PCB. Attach the wires to the WAGO con-

nector. See Chapter 2 for how to attach the wires to a WAGO connector.

6. Attach the WAGO connector to the PCB. As

shown in the illustration at right, run the cable

along the left side of the connector and fix the

cables to the connector with a cable tie.

74±1(2.92±0.04)

106±1(4.17±0.04)

82±0.5(3.23±0.02)

4-Pilot Holes

75±0.5(2.95±0.02)

Dimensions in millimeters (inches)

Andere Handbücher für BR-1000

Inhaltsverzeichnis

Andere Furuno Sicherheitssystem Handbücher

Furuno

Furuno SSAS Bedienungsanleitung

Furuno

Furuno BR-500 Bedienungsanleitung

Furuno

Furuno FELCOM16 Bedienungsanleitung

Furuno

Furuno FB-3101 Bedienungsanleitung

Furuno

Furuno felcom15 Bedienungsanleitung

Furuno

Furuno BR-500 Bedienungsanleitung

Furuno

Furuno BR-1000 Bedienungsanleitung

Furuno

Furuno IC-307 Bedienungsanleitung

Furuno

Furuno BR-500 Bedienungsanleitung

Furuno

Furuno IC-350 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung