Furuno CSH-5LMARK-2 Bedienungsanleitung

www.furuno.com

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Installation Manual

COLOR SCANNING SONAR

MODEL CSH-5LMARK-2

(Product Name: FULL-CIRCLE SCANNING SONAR)

SAFETY INSTRUCTIONS ................................................................................................ i

SYSTEM CONFIGURATION .......................................................................................... iii

EQUIPMENT LISTS........................................................................................................ iv

1. MOUNTING..............................................................................................................1-1

1.1 Hull Unit .............................................................................................................................1-2

1.2 Pre-amplifier Unit .............................................................................................................1-11

1.3 Transceiver Unit...............................................................................................................1-12

1.4 Processor Unit .................................................................................................................1-13

1.5 Control Unit ......................................................................................................................1-13

1.6 Ground .............................................................................................................................1-16

1.7 Motion Sensor (option).....................................................................................................1-17

1.8 DC-AC Inverter (option) ...................................................................................................1-17

2. WIRING....................................................................................................................2-1

2.1 General Description for Cabling.........................................................................................2-1

2.2 Hull unit/Pre-amplifier Unit .................................................................................................2-3

2.3 Transceiver Unit.................................................................................................................2-8

2.4 Processor Unit .................................................................................................................2-11

2.5 Synchronizing Transmission with Other Equipment ........................................................2-16

2.6 DC-AC Inverter ................................................................................................................2-20

3. ADJUSTMENTS ......................................................................................................3-1

3.1 Measuring TX Output.........................................................................................................3-1

3.2 Heading Alignment.............................................................................................................3-2

3.3 Setting for External Equipment ..........................................................................................3-3

3.4 Setting GPS Navaid Smoothing.........................................................................................3-5

3.5 NMEA Version Setting .......................................................................................................3-6

3.6 Adjusting Echo Sounder Video ..........................................................................................3-6

3.7 Sea Trial.............................................................................................................................3-7

APPENDIX 1 JIS CABLE GUIDE .............................................................................AP-1

APPENDIX 2 PROCEDURE FOR RETROFITTING .................................................AP-2

PACKING LIST............................................................................................................ A-1

OUTLINE DRAWINGS ................................................................................................ D-1

INTERCONNECTION DIAGRAM ................................................................................ S-1

7KHSDSHUXVHGLQWKLVPDQXDO

LVHOHPHQWDOFKORULQHIUHH

࣭)85812$XWKRUL]HG'LVWULEXWRU'HDOHU

$VKLKDUDFKR

1LVKLQRPL\D-$3$1

$  -81 



3ULQWHGLQ-DSDQ

$OOULJKWVUHVHUYHG

$  6(3  

3XE1R ,0($

(70,  &6+/0$5 

  

SAFETY INSTRUCTIONS

WARNING WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment

unless totally familiar with

electrical circuits and service

manual.

Only qualified personnel are allowed

to work inside the equipment.

Turn off the power at the

switchboard before beginning

the installation.

Fire or electrical shock can result

if the power is left on.

Do not install the equipment other

than the transducer where they may

get wet from rain or water splash.

Water in the equipment can result in

fire, electrical shock or equipment

damage.

Be sure no water leaks in at the

transducer installation site.

Water leakage can sink the vessel.

Also confirm that the transducer will

not loosen by ship's vibration. The

installer of the equipment is solely

responsible for the proper installation

of the equipment.

FURUNO will assume no esponsibility

for any damage associated with

improper installation.

Install the specified transducer

tank in accordance with the

installation instructions. If a

different tank is to be installed

the shipyard is solely respon-

sible for its installation, and it

should be installed so the hull

will not be damaged if the tank

strikes an object.

The tank or hull may be damaged

if the tank strikes an object.

When assembling the hull unit,

fasten the shaft retainer and

fastening band with the torques

shown below.

Shaft retainer: 20 to 25 N•m

Fastening band: 6 to 8 N•m

If torques are less than the above,

water leakage may occur because

the shaft may loosen and fall.

Mandatory Action

Prohibitive Action

Warning, Caution

The operator must read the safety instructions before attempting to operate the equipment.

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in minor or moderate injury.

WARNING

CAUTION

SAFETY INSTRUCTIONS

CAUTION

0.4 m 0.3 m

CAUTION

0.3 m 0.3 m

1.4 m 0.9 m

Turn off the POWER switch on the

hull unit before manually raising or

lowering the transducer (with the

ratchet wrench).

Bodily injury can result if the rachet

wrench rotates unexpectedly, because

the raise/lower motor may start up.

Observe the following compass

safe distances to prevent

interference to a magnetic

compass:

Observing the following speed

limits when testing the equipment

at sea trial:

Raising/lowering transducer: 16 kn

max.

Transducer completely lowered: 18 kn

max.

Exceeding above limits will damage

the equipment and void the warranty.

The zinc block near the

transducer must be replaced

yearly.

The junction between the transducer

and main shaft may corrode, which

can result in loss of the transducer or

water leakage inside the ship.

Replace the zinc block yearly.

Attach protective

earth

securely

to the ship's body.

The protective earth is required

to the transceiver unit and DC-AC

inverter (option) to prevent

electrical shock.

Processor

unit

Control

unit

DC-AC

inverter

Standard

compass Steering

compass

iii

SYSTEM CONFIGURATION

Display Unit (MU-150HD, etc.)

(2 max.) Processor Unit

CSH-5210-A

Control Unit

CSH-5211-A

Navaid

Current Indicator

AD Converter

Speed Log

E/S Interface

Remote Controller

Speaker

Hull Unit

CSH-5040-A, 600 stroke

CSH-5041-A, 400 stroke

: Standard supply

: Option/User supply

Transceiver Unit

CSH-5130-A-5L

Motion Sensor

MS-100

Pre-amplifier Unit

CSH-5020-A

100/115/200/220/240 VAC

1ø, 50 - 60 Hz

DC/AC

Inverter

TR-2451

24 VDC

Ship's Mains

EQUIPMENT LISTS

Standard Supply

Installation Materials (Cables)

Name Type Code No. Qty Remarks

Processor Unit CSH-5210-A - 1

Control Unit CSH-5211-A - 1

Transceiver Unit CSH-5130-A-5L - 1

Pre-amplifier Unit CSH-5020-A - 1

Hull Unit CSH-5040-A - 1 600 stroke

CSH-5041-A - 400 stroke

Installation Materials CP10-05201 006-910-940 1 For processor unit

CP10-05202 006-904-860 1 For transceiver unit

CP10-05203 006-904-880 1 For pre-amplifier unit

For cables, see the table below.

Accessories FP10-02701 006-905-030 1 For control unit

Spare Parts SP10-02901 006-907-700 1 For processor unit

SP10-02902 006-904-850 1 For transceiver unit

Type Code

Transceiver unit/

Pre-amplifier unit

Processor unit/

Transceiver unit

Display unit/

Processor unit

TX cable RX cable Processor cable Display cable

CP10-05300 000-069-059 S10-7-5 10S1562 5 m S10-6-15(38P) 3COX-2P-6C

5 m

CP10-05310 000-069-067 10S1562 5 m S10-6-30(38P)

CP10-05320 000-069-068 10S1562 5 m S10-6-50(38P)

CP10-05330 000-069-069 S10-7-10 10S1563 10 m S10-6-15(38P)

CP10-05340 000-069-070 10S1563 10 m S10-6-30(38P)

CP10-05350 000-069-072 10S1563 10 m S10-6-50(38P)

CP10-05360 000-069-073 S10-7-15 10S1564 15 m S10-6-15(38P)

CP10-05370 000-069-074 10S1564 15 m S10-6-30(38P)

CP10-05380 000-069-075 10S1564 15 m S10-6-50(38P)

CP10-05400 000-069-076 S10-7-5 10S1562 5 m S10-6-15(38P) 3COX-2P-6C

10 m

CP10-05410 000-069-077 10S1562 5 m S10-6-30(38P)

CP10-05420 000-069-096 10S1562 5 m S10-6-50(38P)

CP10-05430 000-069-184 S10-7-10 10S1563 10 m S10-6-15(38P)

CP10-05440 000-069-186 10S1563 10 m S10-6-30(38P)

CP10-05450 000-069-229 10S1563 10 m S10-6-50(38P)

CP10-05460 000-069-230 S10-7-15 10S1564 15 m S10-6-15(38P)

CP10-05470 000-069-244 10S1564 15 m S10-6-30(38P)

CP10-05480 000-069-245 10S1564 15 m S10-6-50(38P)

Name Type Code No. Qty Remarks

Processor

cable

S10-6-15 (38P) 006-976-580 1 15 m Processor/ Transceiver units

S10-6-30 (38P) 006-976-590 30 m

S10-6-50 (38P) 006-976-600 50 m

EQUIPMENT LISTS

Hull unit can be arranged as below.

Ex) Stroke: 600 mm; Frequency; 55 kHz; Steel tank, Shaft length, 2350 mm,

Type is CSH-5040-A-55-S-23.

Optional Supply

TX cable S10-7-5 006-976-610 1 5 m Transceiver/

Pre-amplifier units

S10-7-10 006-976-460 10 m

S10-7-15 006-976-470 15 m

RX cable 10S1562 006-976-620 1 5 m Transceiver/

Pre-amplifier units

10S1583 006-976-440 10 m

10S1584 006-976-450 15 m

Display unit

cable

3COX-2P-6C 5M 000-146-500 1 5 m Display/

Processor units

3COM-2P-6C 10M 000-146-501 10 m

CSH - 5130 - A - 5L - -

(1): Input voltage: 60 (100 VAC), 72 (220 VAC)

(2): Frequency: 55 kHz, 68 kHz

CSH- - A - - -

(1):Stroke: 5040 (600 stroke) or 5041 (400 stroke)

(2): Frequency: 55 kHz or 68 kHz

(3):Tank: N (None), S (Steel), F (FRP)

(4): Shaft length:13 (1300 mm), 15 (1550 mm), 23 (2350 mm), 40 (4065 mm), 94 (945 mm)

Name Type Code No Qty Remarks

DC-AC Inverter TR-2451 000-146-774 1 set

E/S Interface VI-1100A 000-023-025 1 set

Retraction Tank OP10-5 000-019-283 1 set Made of aluminum

SHJ-0001-2 661-000-012 1 set Made of steel

Speaker SEM-21Q 000-144-917 1 set

Motion Sensor MS-100 000-010-250 1 set

Remote Controller CSH-7040 000-069-138 1 set

Fairing 06-021-4502 001-159-790 1 set For an FRP ship

Name Type Code No. Qty Remarks

(1)

(2)

(1)

(2)

(3)

(4)

EQUIPMENT LISTS

This page is intentionally left blank.

1-1

1. MOUNTING

Be sure the power supply matches equipment voltage rating.

Improper power supply will damage the equipment.

Locate the transducer where the affects of noise and

air bubbles are minimal.

Noise and air bubbles will affect performance.

When selecting a mounting location keep the following points

in mind:

▪ Keep equipment out of direct sunlight.

▪ Keep equipment away from air conditioner.

▪ The useable temperature range of the display unit is 0°C - 50°C.

▪ Provide sufficient ventilation.

▪ Select location where vibration is minimal.

▪ Locate the equipment away from magnets or equipment generating

magnetic fields.

Keep the transducer cable away from oil.

Oil can corrode the cable.

Do not expose the transducer to hot water.

Hot water can damage the transducer.

Do not turn on the equipment with the transducer

exposed to air.

Exposing the transducer to air may damage it.

NOTICE

1. MOUNTING

1-2

1.1 Hull Unit

1.1.1 Installation position of hull unit

Discussion and agreement are required with the dockyard and the ship owner in de-

ciding the installation position of the hull unit. When deciding the installation position,

the following points should be taken into account.

1) Select an area where propeller noise, cruising noise, bubbles and interference

from turbulence are at a minimum. Generally, the point at 1/3 to 1/2 of the ship’s

length from the bow on or near the keel is optimum. On-the-keel installation is ad-

vantageous for minimizing oil consumption in comparison with off-the-keel. In case

the hull unit cannot be installed on the keel, the center of the retraction tank should

be within 1 m of the keel so as to prevent a rolling effect.

Installation position of hull unit

2) Select a place where interference from other equipment is minimal. The hull unit

should be at least 2.5 m away from the transducers of other equipment.

3) An obstacle in the fore direction not only causes shadow zone but also aerated wa-

ter, resulting in poor sonar performance.

4) The following space is required around the hull unit for wiring and maintenance. If

the ambient temperature of the unit is below 0°C, the sonar compartment must be

provided with a heater so as to keep the temperature above 0°C.

Sonar room

1/2 1/3 Within 1 m

BOW

400800

400 800

45˚

Inhaltsverzeichnis

Andere Furuno Sonar Handbücher

Furuno

Furuno CSH8LMK2 Bedienungsanleitung

Furuno

Furuno FSV-84 Bedienungsanleitung

Furuno

Furuno CSH-5L/CSH-8L Bedienungsanleitung

Furuno

Furuno FSV-85 Bedienungsanleitung

Furuno

Furuno CSH-8L Bedienungsanleitung

Furuno

Furuno CH-500 Bedienungsanleitung

Furuno

Furuno CH-300 Bedienungsanleitung

Furuno

Furuno FCV-1000 Bedienungsanleitung

Furuno

Furuno CH-37BB Bedienungsanleitung

Furuno

Furuno CSH-23F Bedienungsanleitung

Furuno

Furuno CH-250 Bedienungsanleitung

Furuno

Furuno FSV25 Bedienungsanleitung

Furuno

Furuno COLOR SCANNING CSH-23F/24F Bedienungsanleitung

Furuno

Furuno FSV-35 Bedienungsanleitung

Furuno

Furuno DFF-3D Bedienungsanleitung

Furuno

Furuno CSH-5L Bedienungsanleitung

Furuno

Furuno CSH-83 Bedienungsanleitung

Furuno

Furuno CH-16 Bedienungsanleitung

Furuno

Furuno CH-24 Bedienungsanleitung

Furuno

Furuno CH-37 Bedienungsanleitung

Furuno

Furuno FSV-85-MARK-2 Bedienungsanleitung

Furuno

Furuno CSH5LMK2 Bedienungsanleitung

Furuno

Furuno FSV-30 Bedienungsanleitung

Furuno

Furuno FSV-30 Bedienungsanleitung

Beliebte Sonar Handbücher anderer Marken

Kongsberg

Kongsberg Simrad SP90 Series Bedienungsanleitung

Eagle

Eagle TriFinder 2 Bedienungsanleitung

Lowrance

Lowrance X-70A Bedienungsanleitung

Lowrance

Lowrance LMS-150 GPS Bedienungsanleitung

Simrad

Simrad EQ 55 Bedienungsanleitung

Lowrance

Lowrance Traditional Bedienungsanleitung

Teledyne

Teledyne BlueView BV3200 Bedienungsanleitung

Reson

Reson SeaBat 7125 SV2 Bedienungsanleitung

Eagle

Eagle 101 Bedienungsanleitung

IMAGENEX

IMAGENEX 881A-GS Bedienungsanleitung

Eagle

Eagle Z-15 Bedienungsanleitung

Simrad

Simrad SH80 - REV C Bedienungsanleitung

Simrad

Simrad ST90 Bedienungsanleitung

Hawk

Hawk Sultan Bedienungsanleitung

Lowrance

Lowrance 1240A Bedienungsanleitung

Kongsberg

Kongsberg Flexview Bedienungsanleitung

VEXILAR

VEXILAR 107 PRO Bedienungsanleitung

Klein

Klein 5000 V2 Series Bedienungsanleitung