After installation and testing of this product it is essential that the INSTRUCTION LEAFLET is available for reference
TD1 Time Switch
Instruction Leaflet DOCTD12021
2 Initial setup
2a Connect SUPPLY to terminals 1 and 2 and LOAD to terminals 4 and 5.
Torque connections to 0.8Nm. Loose connections cause fires!!!!
2b Press and hold “RESET” button for 3seconds to initiate programing functions.
3 Setting the DAY and TIME
Default setting is 24H mode if you wish to change to 12H press “”button for 5 sec, and LCD will display
AM. If you want to change back to 24H mode press ""button 5 sec
Press and hold and press D+ TO
CHANGE DAY
The day is displayed at the top of the LCD display
Press and hold and press H+ TO
CHANGE HOUR
Press and hold and press M+
TO CHANGE MINUTE
Before you start programming the time clock select the function required:
PROGRAMMING, PULSE OR COUNTDOWN (Only 1 of the 3 options can be used simultaneously).
4 Programming
Programming ON memory locations
Setting 1 ON time (display 1 ON)
DEFAULT IS EVERY DAY OF THE WEEK or you can select one of the following
options by pressing the D+ button
OPTIONS: MO-FR,MO-SA,SA SU,MO-WE,TH-SA,MO WE FR,TU TH SA
Programming OFF memory locations
Setting 1 OFF time (display 1 OFF)
DEFAULT IS EVERY DAY OF THE WEEK or you can select one of the following
options by pressing the D+ button
OPTIONS: MO-FR,MO-SA,SA SU,MO-WE,TH-SA,MO WE FR,TU TH SA
To review programmed time settings press
FOR THE PROGRAMMED TIMES TO OPERATE AUTOMATICALLY THE TIMER MUST BE SET TO “AUTO OFF”
(ON LED is NOT ILLUMINATED)
IF YOU ARE WITHIN THE SWITCHING TIMES YOU SHOULD SET THE TIMER TO “AUTO ON”
(ON LED is ILLUMINATED)
MANUAL OVERRIDE Press "MANUAL" to turn ON, ON AUTO, OFF, AUTO OFF programmed times
