Fusion MS-BB300R Bedienungsanleitung

FUSIONENTERTAINMENT.COM

FUSION®

MS-BB300R

B L A C K B O X E N T E R T A I N M E N T S Y S T E M

O W N E R ’ S M A N U A L

ENGLISH

right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such

changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, the Garmin logo, and the FUSION® logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Fusion and

FUSION-Link™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

Apple®, the Apple logo, iPod®, iPod touch®, iPod classic®, iPod nano®, and iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries.

Android™ is a trademark of Google Inc. Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under

license. NMEA®, NMEA 2000®, and the NMEA 2000 logo are registered trademarks of the National Marine Electronics Association. Sirius, XM and all related

Made for iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPod touch (2nd through 5th generation), iPod classic, and iPod nano (4th through 7th

generation).

"Made for iPod and iPhone" means that an electronic accessory has been designed to connect specifically to an iPod or an iPhone respectively, and has been

certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and

regulatory standards. Please note that the use of this accessory with an iPhone may affect wireless performance.

Table of Contents

Getting Started 1

Device Controls 1

Remote Screen 1

Assigning the Remote to a FUSION Stereo 1

Adjusting the Backlight Brightness and Contrast 1

Adjusting the Volume 1

Selecting a Source 2

Switching Between Remote Control Mode and NMEA 2000

Repeater Mode 2

Bluetooth Device Playback 2

Connecting a Compatible Bluetooth Device 2

Selecting a Different Bluetooth Source 2

USB, MTP, and Apple® Device Playback 2

Connecting a USB Device 3

Controlling Music Playback on a USB Flash Drive 3

MTP File Information 3

Radio 3

Setting the Tuner Region 3

Changing the Radio Station 3

Presets 3

SiriusXM Satellite Radio 3

Enabling the SiriusXM Source 3

Locating the SiriusXM Radio ID 3

Activating a SiriusXM Subscription 4

SiriusXM Controls 4

Parental Control Settings on the FUSION NRX Remote

Control 4

DAB Playback 4

Setting the Tuner Region 4

Scanning for DAB Stations 4

DAB Presets 4

Connecting an Auxiliary Device 5

Additional Settings 5

Bluetooth Settings 5

iPhone® and iPod® Settings 5

MTP Settings 5

USB Settings 5

FM and AM Settings 5

General Settings 5

Zone Settings 5

Assigning the Remote to a Zone 6

Appendix 6

Registering Your FUSION MS-BB300 6

Troubleshooting 6

Supported NMEA 2000 PGN Information 7

Index 8

Table of Contents i

Getting Started

This manual contains instructions for using the FUSION® MS-

BB300 stereo with a compatible FUSION NRX series remote

control. The FUSION NRX series remote control is included in

the FUSION MS-BB300R stereo and remote bundle and is an

optional accessory for other models.

The FUSION MS-BB300 stereo can also be controlled using a

FUSION-Link™ compatible multi-function display (MFD) through

the NMEA 2000® network.

Device Controls

Button Function

• Select to turn on the device.

• Select to mute and un-mute the audio.

• Hold to turn off the remote and stereo.

• Select to cycle the available sources.

TIP: You can use the dial to browse and select the source

when the available sources are shown.

• Hold to switch from remote control mode to NMEA 2000

mode.

• Select to open the menu.

• Select to return to the previous screen from the menu.

• Hold to exit the menu.

• Select to switch from NMEA 2000 mode to remote control

mode.

• SIRIUSXM: Select to open the browse menu.

• BT or USB: Select to pause or resume the current track.

• AM/FM: Select to cycle through the tuning modes (auto,

manual, and presets).

• SIRIUSXM: Select to move through the tuning modes (auto

and presets), when you have at least one preset channel.

• DAB: Select to scan for DAB stations.

• BT or USB: Select to skip to the beginning of the track or to

the previous track.

• AM/FM:

◦ Auto or manual tuning: Select to tune to the previous

station.

◦ Hold for faster station skipping in manual mode.

◦ Presets: Select to change to the previous preset.

• AUX: Select to decrease the gain for the connected source.

• SIRIUSXM: Select to return to the previous channel.

• DAB: Select to return to the previous DAB station in the

ensemble. When you reach the beginning of the current

ensemble, the stereo automatically changes to the last

available station in the previous ensemble.

Button Function

• BT or USB: Select to skip to the next track.

• AM/FM:

◦ Auto or manual tuning: Select to tune to the next station.

◦ Hold for faster station skipping in manual mode.

◦ Presets: Select to change to the next preset.

• AUX: Select to increase the gain for the connected source.

• SIRIUSXM: Select to advance to the next channel.

• DAB: Select to advance to the next DAB station in the

ensemble. When you reach the end of the current

ensemble, the stereo automatically changes to the first

available station in the next ensemble.

Dial • Turn to adjust the volume, move through the menus, or

adjust a setting.

• Press to select an option or a setting.

Remote Screen

The information displayed on the remote screen varies

depending on the source selected on the stereo. This example

shows the stereo playing a track on a device connected using

Bluetooth® wireless technology.

ÀSource

ÁPlay status icon

ÂTrack details (if available)

ÃElapsed time

ÄCurrent track number out of total number of tracks in the playlist (if

available)

ÅTrack duration (if available)

Assigning the Remote to a FUSION Stereo

You must assign the remote control to the stereo after installing

the remote control. When multiple FUSION stereos are installed

on the NMEA 2000 network, you can assign a remote control to

a specific stereo.

1Select > Settings > Stereo.

2Select a FUSION stereo.

3Press the dial to save and exit the menu.

Adjusting the Backlight Brightness and

Contrast

1Select > Settings > LCD.

2Press the dial to select brightness or contrast.

3Adjust the brightness or contrast.

4Select to exit the menu.

Enabling the Power Save Feature

You can set the backlight to turn off automatically, after a period

of time, to save power.

1Select > Settings.

2Select the Power Save check box.

3Select to exit the menu.

Adjusting the Volume

1Use the dial to adjust the volume.

2If necessary, press the dial to switch between zones.

Getting Started 1

TIP: To control all zones at the same time, press the dial until

all zones are highlighted.

Selecting a Source

1Select .

2Select an option:

• Turn the dial to highlight a source.

• Select repeatedly to highlight a source.

3Press the dial to select the source.

Switching Between Remote Control Mode

and NMEA 2000 Repeater Mode

By default, the remote control is in remote control mode when

you power it on, allowing you to control a connected FUSION

MS-BB300 device. You can switch to NMEA 2000 repeater

mode to view supported data sentences from connected NMEA

2000 devices.

1Hold to switch from remote control mode to NMEA 2000

repeater mode.

While in NMEA 2000 repeater mode, you can control the

volume and playback of the current source.

2Select to switch from NMEA 2000 repeater mode to remote

control mode.

Selecting NMEA 2000 Information to View

Before you can view NMEA 2000 information, you must set the

remote control to NMEA 2000 repeater mode.

1Select > Settings > NMEA Monitor.

2Select the NMEA 2000 supported data sentences to view.

You can view information only from sensors connected to the

same NMEA 2000 network as the remote control.

3Select to exit the menu.

Cycling NMEA 2000 Information Automatically

By default, when in NMEA 2000 repeater mode, the remote

shows one type of information. You can cycle through all

available NMEA 2000 information by pressing repeatedly or by

setting up automatic cycling.

1Select > Settings > NMEA Monitor > Cycle Screens.

2Select the time between cycles.

3Select to exit the menu.

Selecting Units of Measure

1Select > Settings > NMEA Monitor > Set Units.

2Select the units of measure for distance, speed, and depth.

3Select to exit the menu.

Bluetooth Device Playback

You can pair the stereo to up to eight Bluetooth media devices.

You can control the playback using the keys, but you cannot

browse the music collection. You should select the song or

playlist on the media device.

The availability of song information such as song title, artist

name, and track duration depends on the capability of the media

player and music application. The shuffle and repeat status

icons are not supported over Bluetooth wireless technology.

Connecting a Compatible Bluetooth Device

You can play media from a compatible Bluetooth device using

the Bluetooth wireless connection.

1Select the Bluetooth source.

2Select > Discoverable to make the stereo visible to your

compatible Bluetooth device.

3Enable Bluetooth on your compatible Bluetooth device.

4Bring the compatible Bluetooth device within 10 m (33 ft.) of

the stereo.

5On your compatible Bluetooth device, search for Bluetooth

devices.

6On your compatible Bluetooth device, select the stereo from

the list of detected devices.

7On your compatible Bluetooth device, follow the on-screen

instructions to pair and connect to the discovered stereo.

When pairing, your compatible Bluetooth device may ask you

to confirm a code on the stereo. The stereo does not display

a code, but it does connect correctly when you confirm the

message on the Bluetooth device.

8If your compatible Bluetooth device does not immediately

connect to the stereo, repeat steps 1 through 7.

Selecting a Different Bluetooth Source

When you have more than one Bluetooth device paired to the

stereo, you can select a different source when needed. You can

connect the stereo to up to eight Bluetooth devices.

1With the BT source selected, select .

2Select a Bluetooth device.

USB, MTP, and Apple® Device

Playback

You can connect various USB media players and smartphones

to the stereo. For example, you can connect an Android™

smartphone, a USB flash drive, or a compatible Apple device.

How you access the USB source depends on which type of

media player is connected. The stereo is designed to be used

with one USB connection at a time. You must disconnect one

USB device before connecting another.

NOTE: If you connect an Apple media player to the USB port on

the stereo, you must either disable Bluetooth on the media

player, or unpair the Bluetooth connection from the stereo to

avoid possible media-playback issues.

Media Player Source Selections

Android device MEDIA

Apple device IPOD

USB flash drive USB

MP3 media player (as a mass-

storage device)

USB

NOTE: If your MP3 media player

does not support mass-storage

when connected using USB, you

must connect it to the stereo as an

auxiliary device (Connecting an

Auxiliary Device, page 5).

You can browse the music collection on the USB source using

the categories the device supports, such as songs, albums, and

artists on MTP and Apple devices.

NOTE: The USB source does not support library browsing. You

can browse the folder structure.

You can also browse the files according to the folder structure

on your media player. For example, from the IPOD source, you

can select > Albums.

The availability of song information such as song title, artist

name, track duration, and album cover artwork depends on the

capability of the media player and music application.

NOTE: Different operating systems and media players provide

different levels of support for MTP. Go to

www.fusionentertainment.com for device compatibility

information.

2 Bluetooth Device Playback

Connecting a USB Device

You can connect a USB device to the USB port on the stereo.

1Locate the USB port on the back of the stereo.

2Connect the USB device to the USB port.

3Select the USB source.

Controlling Music Playback on a USB Flash

Drive

1Connect a compatible USB flash drive or media player to the

stereo.

2Select the USB source.

3Select .

4Select the name of the USB drive to view the file structure of

the USB flash drive or media player.

5Select a song to begin music playback.

MTP File Information

After you connect the MTP device, the stereo downloads the full

list of song names from the device and creates a song title

index. This process must be completed before music playback

can begin. For devices with large music collections, this may

take several minutes. The song count appears during this

process. You can use other sources while this process is

underway.

For best results, the music folders on an MTP device should not

contain more than 300 files each. Exceeding 300 files per folder

can cause the MTP device to become unresponsive and reset

the connection to the device.

Music files must be located in a folder using one of these

names. The folder must be located in the root directory of the

MTP device.

• My Music

• My_Music

• mobile

• Music

These guidelines also apply to memory cards installed in the

MTP device.

Radio

To listen to AM or FM radio, you must have a suitable marine

AM/FM antenna properly connected to the stereo and be within

range of a broadcasting station. For instructions on connecting

an AM/FM antenna, see the stereo installation instructions.

To listen to SiriusXM® radio, you must have the appropriate

equipment and subscriptions (SiriusXM Satellite Radio,

page 3). For instructions on connecting a SiriusXM Connect

Vehicle Tuner, see the stereo installation instructions.

To listen to DAB stations, you must have the appropriate

equipment (DAB Playback, page 4). For instructions on

connecting a DAB adapter and antenna, see the installation

instructions provided with your adapter and antenna.

Setting the Tuner Region

You must select the region you are in to receive AM and FM

stations properly.

If you are connected to a compatible SiriusXM tuner and

antenna, and have a subscription (USA only), you must select

the region you are in to receive SiriusXM stations properly.

NOTE: SiriusXM is not available in all regions.

If you are connected to a compatible DAB module and antenna

(not included), you must select the region you are in to receive

DAB stations properly.

NOTE: DAB stations are not available in all regions.

1Select > Settings > Tuner Region.

2Select the region you are in.

Changing the Radio Station

1Select an applicable source, such as FM.

2Select repeatedly to move through the tuning modes:

• Select Auto to scan and stop on the next available station.

• Select Manual to select a station manually.

• Select Presets to select a saved station preset.

3Select or to tune to the station.

Presets

You can save your favorite AM stations and FM stations as

presets for easy access.

You can save your favorite SiriusXM channels if you are

connected to an optional SiriusXM tuner and antenna.

Saving a Station as a Preset

1With an applicable source selected, tune the stereo to a

station.

2Select > Presets.

3Select Save Current.

TIP: You can quickly save the selected station as a preset by

holding .

Selecting a Preset from a List

Before you can select a preset from a list, you must save at

least one station as a preset.

1Select the applicable source.

2Select > Presets.

3Select a preset from the list.

Removing Presets

1With an applicable source selected, select > Presets >

Remove Preset.

2Select an option:

• To remove one preset, select the preset.

• To remote all presets, select Remove All Presets.

SiriusXM Satellite Radio

Only SiriusXM brings you more of what you love to listen to, all

in one place. Get over 140 channels, including commercial-free

music plus the best sports, news, talk, comedy and

entertainment. Welcome to the world of satellite radio. A

SiriusXM Vehicle Tuner and subscription are required. For more

information, go to www.siriusxm.com.

Enabling the SiriusXM Source

You must enable the SiriusXM source before you can listen to

SiriusXM Satellite Radio.

Select > Settings > Tuner Region > USA.

Locating the SiriusXM Radio ID

You must have the radio ID of your SiriusXM Connect Tuner

before you can activate your SiriusXM subscription. You can

locate the SiriusXM Radio ID on the back of the SiriusXM

Connect Tuner or its packaging, or by tuning your stereo to

channel 0.

With the SiriusXM source selected, select > Channels >

All Channels > Radio ID.

The SiriusXM Radio ID does not include the letters I, O, S, or F.

Radio 3

Activating a SiriusXM Subscription

Before you can activate the SiriusXM subscription, you must

have the Radio ID (Locating the SiriusXM Radio ID, page 3).

1With the SiriusXM source selected, tune to channel 1.

You should be able to hear the preview channel. If not, check

the SiriusXM Connect Tuner and antenna installation and

connections, and try again.

2Tune to channel 0 to locate the Radio ID.

3Contact SiriusXM listener care by phone at (866) 635-2349 or

go to www.siriusxm.com/activatenow to subscribe in the

United States. Contact SiriusXM by phone at (877) 438-9677

or go to www.siriusxm.ca/activatexm to subscribe in Canada.

4Provide the Radio ID.

The activation process usually takes 10 to 15 minutes, but

can take up to an hour. For the SiriusXM Connect Tuner to

receive the activation message, it must be turned on and

receiving the SiriusXM signal.

5If the service is not activated within the hour, go to

http://care.siriusxm.com/refresh or contact SiriusXM by phone

at 1-855-MYREFRESH (697-3373).

SiriusXM Controls

When in SiriusXM mode, select .

Presets: Opens the list of preset SiriusXM channels.

Category: Opens a list of channel categories.

NOTE: You can select and to view channels within a

category.

Parental Control Settings on the FUSION

NRX Remote Control

You can lock and unlock SiriusXM radio channels, clear all

locked channels, and change your passcode using a FUSION

NRX remote control.

When in SiriusXM mode, select > Parental.

Unlock: Unlocks the parental controls.

Lock/Unlock: Unlocks or locks channels.

Clear all Locked: Unlocks all locked channels.

Change PIN: Changes the parental passcode.

Locking a SiriusXM Channel Using the FUSION NRX

Remote Control

1When in SiriusXM mode, select > Parental.

2If necessary, select Unlock and Enter your passcode.

3Select Parental > Lock > Channel.

4Select a channel.

5Select Parental > Unlock to lock the parental controls

(optional).

DAB Playback

When you connect a compatible Digital Audio Broadcasting

(DAB) module and antenna, such as the FUSION MS-DAB100A

to the FUSION MS-BB300 stereo, you can tune in to and play

DAB stations.

DAB broadcasts are not available in all regions. When the

stereo is not set to a compatible region, the DAB source is not

available.

Setting the Tuner Region

You must select the region you are in to receive DAB stations

properly.

1Select > Settings > Tuner Region.

2Select the region you are in.

Scanning for DAB Stations

Before you can scan for DAB stations, you must connect a

compatible DAB module and antenna (not included) to the

stereo. Because DAB signals are broadcast in select countries

only, you must also set the tuner region to a location where DAB

signals are broadcast.

1Select the DAB source.

2Select to scan for available DAB stations.

When scanning is complete, the first available ensemble

found begins playing.

NOTE: After the first scan is complete, you can select

again to re-scan for DAB stations. When the re-scan is

complete, the system starts playing the first station in the

ensemble you were listening to when you started the re-scan.

Changing DAB Stations

1Select the DAB source.

2If necessary, select to scan for local DAB stations.

3Select or to change the station.

When you reach the end of the current ensemble, the stereo

automatically changes to the first available station in the next

ensemble.

Selecting a DAB Station from a List

1Select the DAB source.

2If necessary, select to scan for local DAB stations.

3Select > Browse > Stations.

4Select a station from the list.

Selecting a DAB Station from a Category

1Select the DAB source.

2If necessary, select to scan for local DAB stations.

3Select > Browse > Categories.

4Select a category from the list.

5Select a station from the list.

DAB Presets

You can save your favorite DAB stations as presets for easy

access.

You can save up to 15 DAB-station presets.

Saving a DAB Station as a Preset

1With the DAB source selected, change the stereo to a DAB

station.

2Select > Browse > Presets > Save Current.

TIP: You can quickly save the selected DAB station as a preset

by holding .

Selecting a DAB Preset from a List

Before you can select a DAB preset from a list, you must save at

least one DAB station as a preset.

1Select the DAB source.

2Select > Browse > Presets > View Presets.

3Select a preset from the list.

Removing DAB Presets

1With the DAB source selected, select > Browse > Presets.

2Select an option:

• To remove one preset, select Remove Preset, and select

the preset.

• To remove all presets, select Remove All Presets.

4 DAB Playback

Connecting an Auxiliary Device

You can connect various auxiliary devices to the stereo. These

devices have either RCA connectors, a line output, or a

headphone output jack.

1Locate the auxiliary connectors on the stereo.

2If necessary, connect an RCA-to-3.5 mm adapter cable to the

auxiliary device.

3Connect the auxiliary device to the RCA connectors on the

device.

Additional Settings

The available settings vary based on the source selected.

Bluetooth Settings

When a compatible Bluetooth smartphone or media player is

paired and connected to your FUSION MS-BB300 stereo, you

can play media and change options using the remote control.

From the Bluetooth source, select .

Discoverable: Allows the FUSION MS-BB300 stereo to be

discovered by a Bluetooth smartphone or media player when

pairing.

Remove Device: Removes a saved, paired Bluetooth

smartphone or media player from the FUSION MS-BB300

stereo.

iPhone® and iPod® Settings

When a compatible iPhone or iPod is connected to the USB port

of your stereo, you can play media and change options using

the remote control.

From the iPod source, select > iPod Settings.

Repeat: Sets the repeat method for the track or playlist.

Shuffle: Sets the shuffle method for the tracks or album.

MTP Settings

When a compatible MTP device, such as an Android

smartphone, is connected to the USB port of your stereo, you

can play media and change options using the remote control.

From the MEDIA source, select .

Repeat: Sets the repeat method for the track or playlist.

Shuffle: Sets the shuffle method for the tracks or album.

USB Settings

When a compatible USB flash drive is connected to the USB

port of your stereo, you can play supported audio formats and

change options using the remote control.

From the USB source, select .

Repeat: Sets the repeat method for the track or folder.

Shuffle: Sets the shuffle method for the tracks or folder.

FM and AM Settings

In addition to changing stations, you can manage your preset

stations using the remote control.

From the FM or AM source, select > Presets.

Save Current: Saves the currently playing station as a preset.

Remove Preset: Allows you to remove one or all preset stations

from the device.

TIP: You can quickly save the selected station as a preset by

holding .

General Settings

Select > Settings.

NOTE: When an option button is filled, the option is on. When

the button is clear, the option is off.

NOTE: Not all options and settings are available for all stereos.

See the stereo owner's manual for more details.

Zone: Enables you to configure the speaker zones.

Zone > Tone: Adjusts the bass, middle, and treble tones.

LCD: Sets the brightness and contrast.

Power Save: Enables and disables the backlight power-save

feature.

Key Sound: Enables and disables the sound.

Wake with Stereo: Turns on the remote when the stereo is

turned on by an MFD.

NMEA Monitor: Sets the data to view, the data display cycle,

and the units of measure for NMEA 2000 data from a

connected FUSION-Link compatible multi-function display

(MFD).

Language: Sets the language used on the remote.

Searching: Enables FUSION Alpha Search Technology (FAST),

which allows you to quickly search for tracks by letter or

number. If your iPhone, iPod, or MTP media source contains

more than 100 artists, songs, or albums, you can enable a

fast search to quickly navigate by letter or number. The Off

option turns off FAST searching and displays artist, album,

and song lists using the default layout. The 100-800 options

display lists using the FAST search menu.

Tuner Region: Sets the region used by the FM, AM, DAB, or

SiriusXM source.

Tel Mute: Sets the behavior of the mute wire. The device can

either mute the audio or switch to the AUX input when the

optional mute wire is activated.

ARTWORK: Shows or hides the album cover artwork on a

connected FUSION-Link compatible multi-function display

(MFD).

NOTE: Album art cannot be shown on a remote control or

when the media player is connected using Bluetooth

technology.

Sources: Remove sources you do not want to see in the source

list.

Set Device Name: Assigns a name to a connected stereo.

Stereo: Assigns the remote control to a connected stereo.

Update: Updates the connected stereo, remote control, or

accessory.

Update > Factory Reset: Resets the connected stereo settings

to factory default values.

About: Shows the installed software version of the

entertainment system and the remote.

Zone Settings

You can adjust the settings for each available zone using the

remote control. Each zone has different settings you can adjust.

Select > Settings > Zone.

Tone: Sets the bass, mid, and treble for all zones.

Assign: Assigns the remote control to a single zone or to all

zones.

Internal Amplifier: Selects the internal stereo amplifier or an

external amplifier.

Zone 1 Settings

Select > Settings > Zone > Zone 1.

Balance: Sets the left and right balance of the zone.

Volume Limit: Sets the maximum volume for the zone.

Set Zone Name: Assigns a name to the zone.

Connecting an Auxiliary Device 5

Zone 2 Settings

Select > Settings > Zone > Zone 2.

Enable: Enables and disables the zone.

Link to Zone 1: Enables zone 2 to use the same volume

settings as zone 1.

Balance: Sets the left and right balance of the zone.

Volume Limit: Sets the maximum volume for the zone.

Set Zone Name: Assigns a name to the zone.

Zone 3 Settings

Select > Settings > Zone > Zone 3.

Enable: Enables and disables the zone.

Balance: Sets the left and right balance of the zone.

Volume Limit: Sets the maximum volume for the zone.

Sub Filter: Sets the frequency filter of the subwoofer.

Sub Level: Sets the output level of the subwoofer.

Volume Control: Allows the volume of this zone to be controlled

by another amplifier or stereo and provides a fixed line-level

output when the option button is cleared.

Set Zone Name: Assigns a name to the zone.

Assigning the Remote to a Zone

1Select > Settings > Zone > Assign.

2Select a zone or all zones.

3Select to exit the menu.

Appendix

Registering Your FUSION MS-BB300

Help us better support you by completing our online registration

today.

• Go to www.fusionentertainment.com.

• Keep the original sales receipt, or a photocopy, in a safe

place.

Troubleshooting

The stereo does not respond to key presses

• Turn off power to the stereo for two minutes to reset the

stereo.

The stereo keeps locking up when connected to an

Apple device

• Press and hold the power button to reset the stereo.

• Reset the Apple device. Go to www.apple.com for more

information.

• Make sure you have the latest version of iTunes® and the

latest operating software on your Apple device.

The stereo is not finding my connected Apple device

• Make sure you have the latest version of iTunes and the

latest operating software on your Apple device.

• Make sure you have the latest version of the FUSION-Link™

application on your Apple device.

• Reset the Apple device.

Go to www.apple.com for more information.

• Contact your FUSION dealer or send an email to FUSION

from www.fusionentertainment.com .

My Bluetooth audio is interrupted by short breaks

• Ensure the media player is not covered or obstructed.

Bluetooth technology performs best with line-of-sight

operation.

• Bring the media player within 10 m (33 ft.) of the stereo.

• Turn off the Discoverable setting after pairing a Bluetooth

device to the stereo.

The stereo does not display all song information from

my Bluetooth source

The availability of song information such as song title, artist

name, track duration, and album cover artwork depends on the

capability of the media player and music application.

Album cover artwork and shuffle and repeat status icons are not

supported by Bluetooth technology.

SiriusXM Troubleshooting

Advisory Description Resolutions

Check Antenna The radio has detected a fault with the SiriusXM

antenna. The antenna cable may be disconnected or

damaged.

• Verify that the antenna cable is connected to the SiriusXM Connect

Vehicle Tuner.

• Inspect the antenna cable for damage and kinks. Replace the antenna

if the cable is damaged. SiriusXM products are available at your local

car audio retailer, or at www.shop.siriusxm.com .

Check Tuner The stereo is having difficulty communicating with the

SiriusXM Connect Vehicle Tuner. The tuner may be

disconnected or damaged.

Verify that the SiriusXM Connect Vehicle Tuner cable is connected

securely to the stereo.

No Signal The SiriusXM Connect Vehicle Tuner is having

difficulty receiving the SiriusXM satellite signal.

• Verify that your vessel is outdoors with a clear view of the sky.

• Verify that the SiriusXM antenna is mounted securely to the vessel.

• Remove obstructions above or next to the SiriusXM antenna.

• Inspect the cable antenna for damage and kinks. Replace the antenna

if the cable is damaged. SiriusXM products are available at your local

car audio retailer or at www.shop.siriusxm.com .

• Consult the SiriusXM Connect Vehicle Tuner installation manual for

more information on antenna installation.

Subscription

Updated

The radio has detected a change in your SiriusXM

subscription status.

• Select any button to clear the message.

• Go to www.siriusxm.com or call 866-635-2349 with questions about

your subscription

6 Appendix

Andere Handbücher für MS-BB300R

Inhaltsverzeichnis

Andere Fusion Auto-Videosystem Handbücher

Fusion

Fusion Apollo MS-RA770 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Kia

Kia MTXM100YPPE Bedienungsanleitung

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung

DP Audio Video

DP Audio Video dbd807nav Bedienungsanleitung