IMPORTANT SAFETY INSTRUCTIONS
Before using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury to persons including
the following:
. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table. The product may
fall causing serious damage to the product.
6. Slots and openings in the enclosure and the back and bottom are provided for
ventilation, to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should never be placed near or
over a radiator or heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.
7. This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be abused by persons walking on it.
9. Do not overload wall outlets and extension cords as this can result in the risk of
fire or electric shock.
0. Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a risk of
fire or electric shock. Never spill liquid of any kind on the product.
.Do not disassemble this product, but take it to a qualified service technician or
service center when repair work is required. Opening or removing covers may
expose you to voltage or other risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
2. Unplug this product from the wall outlet and refer to qualified service personnel
under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C.If the product has been exposed to rain or water.
D.If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and may require extensive
work by a qualified technician to restore the product to normal operation.
E. If the product has been dropped or the enclosure has been damaged.
F. If the product exhibits a distinct change in performance.
3. Avoid using a telephone during an electrical storm. There may be a remote risk
of electric shock from lightning.
4. Do not use the telephone to report a gas leak in the vicinity of a leak.
