Pub. 42004-255
GAI-Tronics Corporation 400 East Wyomissing Avenue, Mohnton, PA 19540 USA
610-777-1374 n800-492-1212 nFax: 610-775-6540
GAI-TRONICS CORPORATION
Model 12534-001
SONIC ALARM™ Wall Mount Bracket
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
This kit includes the following components:
Item
Number Description Qty
1Bracket Set Wall Mount 1
Consisting of:
1a Bracket, Wall Attaching 2
1b Bracket, Front 1
1c Bracket, Support 2
2Model 13340 Horn 4
3Driver 4
4Screw, Hex Head ¼-20 thread 8
5Washer, Flat, ¼-inch 16
6Washer, Lock, ¼-inch 8
7Nut, ¼-20 Thread 8
8Miscellaneous Mounting Hardware not supplied
Note: Site-dependent hardware is required based on the configuration of the mounting surface. All
hardware must have a hot dipped galvanized finish. Lock washers and/or locking nuts are required.
Installation
1. Install the wall attaching brackets (Item Number 1a) and the support bracket (Item Number 1c) using
the provided screws, washers, and nuts (Item Number 4-7). See Figure 1.
2. Position the resulting bracket structure against the desired mounting surface, and mark the locations
for the drilled holes as shown in Figure 2.
