Galaxy Audio DSPOT DS-EQ230 Bedienungsanleitung

USER’S MANUAL

DS-EQ230

Dual Channel 30 Band EQ

USB

(482mm)

19"

DIGITAL

DS -EQ 230 L IN R IN L OUT R OUT L COMP R COMP

Contents

Introduction

Thank you for choosing a Galaxy DSPOT Digital Signal Processor. You have joined

hundreds of thousands of other satisfied Galaxy customers. Since 1977 Galaxy Audio’s

professional experience in design and manufacturing ensure our products' quality,

performance and reliability.

For the most up to date manual and information

visit www.galaxyaudio.com.

Introduction..........................................................................................1

Safety Instructions................................................................................ 2

Overview.......................................................................................3

Getting Started with Front Panel Controls........................................ 4 - 27

Using the PC Interface.................................................................. 28 - 34

Volume Controls Table................................................................. 35 & 36

Specifications..................................................................................... 37

Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS !

READ these instructions.

KEEP these instructions.

HEED all warnings.

FOLLOW all instructions.

DO NOT use this apparatus near water.

CLEAN ONLY with dry cloth.

DO NOT block any ventilation openings. Install in accordance with the manu-

facturer's instructions.

DO NOT install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

DO NOT defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wider blade or the third

prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

PROTECT the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

ONLY USE attachments/accessories specified by the manufacturer.

10.

11.

This symbol indicates that dangerous voltage

Constituting a risk of electric shock is present

within this unit.

This symbol indicates that there are important

Operating and maintenance instructions in the

Literature Accompanying This Unit

UNPLUG this apparatus during lightning storms or when unused for long periods of

time.

REFER all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is dam-

Aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been

dropped.

DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled

with liquids, such as vases, on the apparatus.

USE only with a cart, stand, tripod, bracket, or table

Specified by the manufacturer, or sold with the

Apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Remove the batteries from the receiver if the system will not be used for a long

period of time. This will avoid any damage resulting from a defective, leaking

battery.

DO NOT throw used batteries into a fire. Be sure to dispose of or recycle used

batteries in accordance with local waste disposal laws.

12.

13.

14.

15.

16.

17.

Overview

DS -EQ 23 0 L IN R IN L OUT R OUT L COMP R COMP

Described below are the functions of the front panel control buttons and encoders for the

DS-EQ230.

1 2 3456 7 8 9 10 11 12 13

1 - LCD Display

2 - Navigation/Parameter 1 Key

3 - Parameter 2 Key

4 - Enter Key

5 - Escape Key

6 - Utility Key

7 - Parameter 3 Key

8 - Left Input Edit/Mute Key

9 - Right Input Edit/Mute Key

10 - Left Output Edit/Bypass Key

11 - Right Output Edit/Bypass Key

12 - Left Comp Edit/Bypass Key

13 - Right Comp Edit/Bypass Key

As soon as the DS-EQ230 is turned ON the device model name will appear in the LCD screen:

A status bar will show the progress of the DS-EQ230 initialization process:

The DS-EQ230 has eight factory pre-set: “Default Flat”, “Default Classic”, “Default Disco”,

“Default Jazz”, “Default Pop”, “Default RnB”, “Default Rock” and “Default Vocal”.

After the initialization, the DS-EQ230 will show on the LCD the first of the embedded preset, or

the last one selected prior to the unit being turned off.

First time activation will default to the first of the preset:

Getting Started

DS-EQ230

Equalizer 30+30

Default Flat

Getting Started

• Encoders and ENTER, ESC buttons

The DS-EQ230 is equipped with 3 Relative Encoders, “NAV/PM1”, “PM2” and “PM3”. These

encoders allow you to navigate the user interface and edit sections of the processor. They allow

the user to navigate within the screen for the selection of sub-menus, pages and parameters and to

select the values to be assigned during the editing operations.

The “ENTER” and “ESC” buttons allow the user to confirm or NOT confirm the operations

performed by the encoders.

• UTILITY, LIN/RIN and LOUT/ROUT/LCOMP/RCOMP buttons

The UTILITY button allows the User to enter the Sub-menus and set the general characteristics of

the Equalizer. The LIN and RIN buttons allow the User to enter the Editing Menus of the Equalizer’s

Input Channels or to MUTE the Equalizer’s Outputs.

LOUT/ROUT and LCOMP/RCOMP buttons, allow the User to access UTILITY functions related to

the Equalizer (LOUT/ROUT) or to enter the Editing Menus of the Equalizer’s Compressors Section

(LCOMP/RCOMP).

The BYPASS functions allows to bypass the Equalizer setting (LOUT/ROUT) or the Compressor

setting (LCOMP/RCOMP).

As understood, the LIN/RlN as well as the LOUT/ROUT and LCOMP/RCOMP buttons have double

functions dependent on the push and hold time.

When the LIN/RIN buttons are pushed and held for more than one second, Input Channels LIN or

RIN are either muted or unmuted. The red LED will illuminate when the Channel is muted. When

the “MUTE” LED is OFF, then the related Input Channel is UN-MUTED.

A momentary push of the LIN/RIN buttons enters the Editing Mode for the Equalizer’s Channels

(see later for the Equalizer’s Channel Editing details).

The blue “EDIT” LED will now be ON.

When the LOUT/ROUT buttons are pushed and held for more than one second, the Equalizer will

go into bypass and the red LED will illuminate indicating bypass. To remove from bypass push and

hold again for more than one second, the red LED will turn off indicating the Equalizer is now in

circuit.

When the LCOMP/RCOMP buttons are pushed and held for more than one second, the

Compressor will go into bypass and the red LED will illuminate indicating bypass. To remove from

bypass, push and hold again for more than one second. The red LED will turn off indicating the

Compressor is now in circuit.

A momentary push of the LOUT/ROUT buttons enters Utilities’ functions for the Equalizer’s

Channels (see later for the Equalizer’s Utilities Functions details). The blue “UTILITY” LED will

now be ON.

A momentary push of the LCOMP/RCOMP buttons enters the Editing Menu for the Equalizer’s

Compressor Section (see later for the Compressor’s Editing details). The blue “EDIT” LED will

now be ON.

• DS-EQ230 Menu and Sub-Menu Structures

As stated above, the start-up default screen is the following factory preset:

From this point, sub-menus are accessed using the “UTILITY”, “LOUT/ROUT”, “LCOMP/RCOMP”,

“ENTER” and “ESC” buttons and all parameters and values are navigated by the “NAV/PM1”,

“PM2” and “PM3” encoders. Please refer to the following menu structures:

DS-EQ230

Default Flat

• Menu "UTILITY" [access by pushing the "UTILITY" button]

From the “Default Screen”, it is possible access the “UTILITY” menu pushing the “UTILITY” button

and the Sub-Menus pages can be selected just rotating clockwise and counter-clockwise the

“NAV/PM1” encoder.

Once selected the sub-menu page, using the “ENTER” button can be accessed the Sub-Menus

pages, again “scrollable” using the “NAV/PM1” encoder and accessible for the parameters’ editing

pushing again the “ENTER” button.

Through the “ESC” button, it is any time possible to go back to the action and page preceding the

“ENTER” button use.

Once inside the Sub-Menus pages, the several options can be scrolled and using the “PM2” or

“PM3” encoders and selected/confirmed pushing the “ENTER” button.

Note: In every Sub-Menu the option currently selected/running will have an asterisk “*” showing to

the right of the description on the LCD screen

Options that are not selected/running will be displayed with NO Asterisk.

Pushing the ENTER button on an unselected option will mean an asterisk will then appear and this

option will now take over as the currently selected/running option.

System Utilities Sub-menu - this sub-menu allows to access several operations related to the

DS-EQ230 Start Up and General Configuration:

UTILITY MENU

- System Utilities -

From the “System Utilities Sub-menu”, pushing “ENTER” and then using the “NAV/PM1” encoder

for scrolling will give access to the following pages:

- Power-On Procedure: this gives you the ability to select the option that will apply when

the DS-EQ230 powers up after being switched on:

By pressing ENTER and rotating the “PM2” or “PM3” encoder, it is possible to choose between

two options: “Fade In On” or “Fade In Off".

The currently running option will be displayed with an asterisk to the right of the option description.

To change the option simply ENTER on the option not displaying the asterisk and that option

Will become active and an asterisk will now appear to the right of the option description.

SYSTEM UTILITY

- Power-On Procedure -

The following two options are available:

FADE-In = Off ... when the DS-EQ230 is turned on, all Outputs regardless of their status before

The Unit was switched off, will be MUTED or UNMUTED automatically. Meaning the DS-EQ230

will have no active Outputs or active Outputs, during the start-up process, depending from the

Outputs’ previous status.

FADE-In = On ... when the DS-EQ230 is turned on, all Outputs not previously muted before the

Unit was switched off will be active. Meaning the DS-EQ230 outputs will be controlled by a volume

ramp to avoid any sudden sound.

If the option “Fade-In=On” is selected, the screen will show the following:

Delay Time/Distance: this page allows you to select the measurement unit to be used for the

Delays: Time (in milliseconds “ms”) or Distance (in meters “m”):

By pressing ENTER and rotating the “PM2” or “PM3” encoder, it is possible to select the

measurement unit to be used for the delay, which will be confirmed by pushing the ENTER button.

The following screen shows the selected delay measurement is Time (milliseconds):

Power-On Procedure

Fade-In: On

SYSTEM UTILITY

- Delay Units -

DPA-240A

1x2 WAY X-OVER

Delay Units

Unit : Time (ms) *

Ramps on changes: this page allows you to activate or de-activate Fading-in and Fading-out

ramps on the input/output volumes when any parameter changes:

When connected to the DS-EQ230 by the PC remote control software, it is possible to request

sudden parameter changes where the difference between the old parameter and the new one

Can cause unwanted “click” noises (big differences in volume changes) or “bumps” (big

differences in Hp/lp filters cutting frequency values) as the DSP reconfigures.

The Fading-In and Fading-Out ramps eliminate any potential clicks and bumps.

This function can be de-activated when the unit needs to be used in “live” conditions and small

parameter adjustments are requested “on the fly” during live performance.

The following screen shows the Fading ramps function is Off, and therefore de-activated:

Software Version: this page allows you to confirm the Software Version running on the

DS-EQ230:

DPA-240A

1x2 WAY X-OVER

Ramps on Changes

DPA-240A

1x2 WAY X-OVER

SYSTEM UTILITY

- Ramps on Changes -

SYSTEM UTILITY

- Software Version -

DPA-240A

1x2 WAY X-OVER

Ramps on changes

Ramp : Off *

Program Utilities Sub-menu - this sub-menu allows you to access several options related to

the DS-EQ230 operating mode and to manage the presets stored and recallable within the Unit:

DPA-240A

1x2 WAY X-OVER

UTILITY MENU

- Program Utilities -

By pressing the ENTER button and then using the “NAV/PM1” encoder the following pages can be

accessed:

Recall a Program: this page allows the Loading of a preset program.

The DS-EQ230 contains 8 Factory presets occupying the first 8 positions of the Preset list which

setting is shown in the “A-Appendix”.

The 8 Factory presets are the following

1. Default Flat

2. Default Classic

3. Default Disco

4. Default Jazz

5. Default Pop

6. Default RnB

7. Default Rock

8. Default Vocal

You can store up to 24 presets in the DS-EQ230 memory starting from the location 09 up to the

location 32.

Through the “Recall a Program” page, the Factory and the available user’s preset can be recalled

for the DS-EQ230 filters’ setting:

By pressing ENTER and rotating the “PM2” or “PM3” encoders, it is possible to scroll through all

current available factory and user presets.

If NO USER PRESETS are stored yet, the screen will show ONLY the factory presets:

If presets have previously been stored by the user, any one of them can be recalled starting from

the location 09:

DPA-240A

1x2 WAY X-OVER

Recall a Program

01: Default Flat

[ENTER] to Recall

09: PRESET1

PROGRAM UTILITY

- Recall a Program -

By using the “PM2” or “PM3” encoder it is possible to scroll through the stored presets. Once the

desired preset appears on the screen select it by pressing the “ENTER” button and this will force

the DS-EQ230 to begin to load this selected preset and the following transitory screen will appear:

DS-EQ230

1x2 WAY X-OVER

Inhaltsverzeichnis

Andere Galaxy Audio Signalprozessor Handbücher

Galaxy Audio

Galaxy Audio DSPOT DS-CP25 Bedienungsanleitung

Beliebte Signalprozessor Handbücher anderer Marken

2Y-LINK Technology

2Y-LINK Technology CI-12-ASP-DAASS Bedienungsanleitung

Crane Song

Crane Song Falcon Bedienungsanleitung

Steg

Steg DSP 6 Bedienungsanleitung

Rocktron

Rocktron INTELLIFEX LTD Bedienungsanleitung

RF-Lambda

RF-Lambda RF1457 Bedienungsanleitung

TC Electronic

TC Electronic DB8 MKII Handbuch

Acqiris

Acqiris U5309A Bedienungsanleitung

PCI

PCI MicroTrans EQ Handbuch

Crestron

Crestron Avia DSP-1282 Bedienungsanleitung

turck

turck MS96-11EX0-R/24VDC Bedienungsanleitung

Rolls

Rolls ROTORHORN RP147 Bedienungsanleitung

ESX

ESX QUANTUM QL810SP Bedienungsanleitung

Oberheim

Oberheim GM-1000 Bedienungsanleitung

AMC

AMC DSP8X8 Bedienungsanleitung

Planet Audio

Planet Audio PC3.5B Bedienungsanleitung

Behringer

Behringer Super-X Pro CX3400 Bedienungsanleitung

Euphonix

Euphonix DF64 Digital Frame Bedienungsanleitung

Lem Elettronica

Lem Elettronica DSP30-4G Bedienungsanleitung