Game Winner FSGWSF1022 Bedienungsanleitung
6V Low Boy / VP Digital
Control Unit
Model # : FSGWSF1022 (HU2222501-GW)
Please keep this instruction manual for future reference
HU2222501-GW–ENG Pg.1 20160317-V2
Customer Service: (888) 837-1380, 8:00am to 5:00pm, Pacific Standard Time,
Monday thru Friday
-------- OR --------
Customer Service: (888) 922-2336, 7:00am to 12:00am CST daily
Live Chat at: www.academy.com
Email: customerservice@academy.com
(Made in China)
Warnings -------------------------------------------------------
Tools required ------------------------------------------------
Parts List -------------------------------------------------------
Hardware List -------------------------------------------------
Product diagram ---------------------------------------------
Assembly Instructions -------------------------------------
How to install the battery ---------------------------------
How to operate the timer ---------------------------------
Testing the feeder -------------------------------------------
Warranty -------------------------------------------------------
Table of Contents Page
3
4
5
5
6
7-8
9
10
11
12-13
HU2222501-GW–ENG Pg.2 20160317-V2
NOTE: Before beginning assembly of product, make sure all
parts are present. Compare parts with package content list
and hardware contents. If any part is missing or damaged do
not attempt to assemble the unit. Contact customer service
for replacement parts.
Warnings
PAY ATTENTION to these statements when reading this manual and the
information contained can save your life.
DANGER : Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING : Be alert to the possibility of serious bodily injury if the
instructions are not followed. Be sure to read and carefully follow all of the
messages.
CAUTION : Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
READ AND FOLLOW ALL SAFETY STATEMENTS, WARNINGS, ASSEMBLY
INSTRUCTIONS AND USE & CARE DIRECTIONS BEFORE ATTEMPTING TO
ASSEMBLE. KEEP THIS MANUAL FOR FUTURE REFERENCE.
REFER TO THE IMAGES IN THIS MANUAL FOR VISUALIZATION OF THE
ASSEMBLY PROCESS IN ADDITION TO READING THE INSTRUCTIONS.
SOME PARTS CONTAIN SHARP EDGES. SHARP POINTS OR EDGES CAN
SCRATCH, POKE, OR PUNCTURE. WEAR APPROPRIATE CLOTHING AND
SAFETY GLOVES DURING ASSEMBLY.
THE 6V RECHARGEABLE BATTERY (NOT INCLUDED) SHOULD HAVE A
COMPLETE CHARGE PRIOR TO THE FIRST TIME OF OPERATION. THIS
REQUIRES A MINIMUM OF AT LEAST SIX (6) HOURS OF CHARGING.
THE PROPER SPACING BETWEEN THE SPIN PLATE AND THE FUNNEL IS
3/8 INCH. THIS IS VERY IMPORTANT FOR SERVICE FREE OPERATION.
TO TEST YOUR FEEDER FOLLOW THE INSTRUCTIONS IN THE TIMER
MANUAL. DO NOT TEST FEEDER WHEN IT CONTAINS FEED. TEST
FEEDER WHEN EMPTY ONLY! TESTING THE FEEDER WHILE IT CONTAINS
FEED WILL CAUSE FEED TO BE DISCHARGED AT A HIGH VELOCITY AND
COULD RESULT IN BODY INJURY. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH!
HU2222501-GW –ENG Pg.3 20160317-V2
Tools Required
1
Adjustable
Wrench
HU2222501-GW–ENG Pg.4 20160317-V2
13
Funnel
1pc
14
Timer Kit
1pc
15
Mounting Bracket
2pcs
26
Digital Timer
1pc
J
Hex. Bolt (M6x20)
10pcs
K
Flat Washer (dia. 6mm/18)
2pcs
L
Butterfly Nut (M6)
2pcs
M
Flange Nut (M6)
2pcs
R
Wing Nut
1PC
Parts List - Timer Kit Set –Component and Hardware
!! Components and Hardware are packed INSIDE the Timer Kit Set
package!!
SP4 - Bushing
HU2222501-GW–ENG Pg.5 20160317-V2
Product Diagram
HU2222501-GW–ENG Pg.6 20160317-V2
R
13
14
15
M
L
K
R
J
26
Assembly Instructions (Funnel and Timer Kit )
Step 1:
Attach Funnel (#13) to the
bottom of hopper using bolts
(J, M6x20).
Step 2:
Attach Mounting bracket
(#15) to the Timer Kit (#14)
using bolts (J, M6x20),
flange nut (M, M6), washer
(K, 6mm) and butterfly nuts
(L, M6).
Hardware :
#J –4pcs
Hardware :
#J –2pcs #K –2pcs
#L –2pcs #M –2pcs
#R –1pc
HU2222501-GW–ENG Pg.7 20160317-V2
13
J
R
Assembly Instructions (Funnel and Timer Kit )
Step 3:
Attach the Mounting brackets
(#15) to the bottom of the
hopper using bolts (J, M6x20)
Step 4:
If the feeder is equipped
with a varmint guard,
attached it back to the
bottom of Deer Feeder.
Hardware :
#J –4pcs
HU2222501-GW–ENG Pg.8 20160317-V2
J
15
14
HOW TO INSTALL BATTERY
CAUTION
REMOVE TIMER KIT COVER AND INSTALL A 6V RECHARGEABLE
BATTERY (NOT INCLUDED) BY ATTACHING RED ALLIGATOR CLIP TO
THE POSITIVE TERMINAL (+) AND BLACK ALLIGATOR CLIP TO THE
NEGATIVE (-) TERMINAL.
WARNING
THE 6V RECHARGEABLE BATTERY (NOT INCLUDED) SHOULD HAVE A
COMPLETE CHARGE PRIOR TO FIRST TIME OPERATION. REFER TO
USER INSTRUCTION OF THE BATTERY.
CONNECTING THE BATTERY IN ANY OTHER WAY WILL PERMANENTLY
DAMAGE YOUR UNIT. TAKE EXTREME CARE TO MAKE THIS
CONNECTION PROPERLY. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
HU2222501-GW–ENG Pg.9 20160317-V2
HOW TO OPERATE THE TIMER
CAUTION
HOW TO OPERATE THE TIMER
READ THE OPERATION MANUAL INCLUDED IN THE TIMER KIT UNIT.
ATTENTION
IF USING THE GAME WINNER TIMER #FSGWSF1004 AS A REPLACEMENT
TIMER, IT WILL WORK WITH EITHER 6 OR 12 VOLT MOTORS.
****** GAME WINNER MOTORS ARE 6 VOLT. ******
ATTENTION
THE PROPER SPACING BETWEEN THE SPIN PLATE AND THE FUNNEL IS
3/8 INCH (0.953 cm). THIS IS VERY IMPORTANT FOR SERVICE- FREE
OPERATION.
3/8” / 0.953 cm
HU2222501-GW–ENG Pg.10 20160317-V2
Inhaltsverzeichnis
Andere Game Winner Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
