GamerModz SPS-X3 Bedienungsanleitung

GamerModz PS4 –SPS-X3 Ver 4.0 1

INSTRUCTION MANUAL

PS4 –SPS-X3 VER 4.0

Congratulations, welcome to the GamerModz Family! You are now a proud owner of a GamerModz Custom

Modded Controller.

The SPS-X3 - VER 4.0 FOR PS4 has been completely redesigned from the ground up to maximize your gameplay

experience. It includes a much faster processor allowing you turn mods on and off much quicker than previous

releases. Additionally, we have added many new mods as well as an on/off feature that allows you to use the

controller as standard controller without the possibility of accidently turning a mod on.

Your new GamerModz SPS-X3 Controller includes the following mods (Note you must be in the SPS-X3 Mode to

enable these mods. See Page 2):

•Rapid Fire (15 Pre-Set Modes).................................................................................................Page 2

•Adjustable Rapid Fire (5 Programmable Modes)....................................................................Page 4

•Left Trigger Rapid Fire .............................................................................................................Page 6

•Dual Trigger Rapid Fire (Akimbo) ............................................................................................Page 6

•Auto Burst (4 Modes)..............................................................................................................Page 7

•Remappable Pro Buttons (Optional Add On)..........................................................................Page 8

IMPORTANT: Verify that your GamerModz SPS-X3 Controller is Version 4 by following the instructions below.

The LED will flash 4 times indicating Version 4.

tap

Hold

, then

GamerModz PS4 –SPS-X3 Ver 4.0 2

Top level modes

All GamerModz Controllers have been redesigned to have a top level on/off feature. Your SPS-X3 controller is

designed with the following top level modes:

•Mode 1: SPS-X3 Mod

•Mode 2: Off (All Mods Disabled)

IMPORTANT: When you first power on yourcontroller, you will begin in Mode 2.

To change modes, hold down the Left Thumbstick and tap the Right on the D-Pad the number of times

corresponding to the mode you would like, then release the Left Thumbstick .The LED will flash the number

of times corresponding to the mode selected.

Rapid Fire modes

Your GamerModz Controller comes with 20 Rapid FireModes.Modes 1 thru 5 are custom programmable

modes that are user re-programmable for quick access. Modes 6 thru 20 are preset modes ranging from 6 shots

per second to 20 shots per second.

Turn On/off Rapid fire quickly

To enable/disable Rapid Fire, Hold Down the Right Trigger , Tap Down on D-Pad , then Release the

Right Trigger . Note: If you turn Rapid Fire on this way, the SPS-X3 Controller will default to the last Rapid

Fire Mode enabled.

tap

, then

Hold

Release

, then

Release

tap

Hold

GamerModz PS4 –SPS-X3 Ver 4.0 3

Selecting a Rapid fire modes

To enter a rapid fire mode, Hold Down the Right Trigger , and tap Up on the D-Pad the amount of

times corresponding to the mode you would like to enter, then Release the Right Trigger . The PS4

Controller LED will flash the numberof times corresponding to the mode you selected.

MODE 1 ---------------- X 1CUSTOM

MODE 11 ----------------- X 11 11 SHOTS PER SECOND

MODE 2 ---------------- X 2CUSTOM

MODE 12 ----------------- X 12 12 SHOTS PER SECOND

MODE 3 ---------------- X 3CUSTOM

MODE 13 ----------------- X 13 13 SHOTS PER SECOND

MODE 4 ---------------- X 4CUSTOM

MODE 14 ----------------- X 14 14 SHOTS PER SECOND

MODE 5 ---------------- X 5CUSTOM

MODE 15 ----------------- X 15 15 SHOTS PER SECOND

MODE 6 ---------------- X 66SHOTS PER SECOND

MODE 16 ----------------- X 16 16 SHOTS PER SECOND

MODE 7 ---------------- X 77SHOTS PER SECOND

MODE 17 ----------------- X 17 17 SHOTS PER SECOND

MODE 8 ---------------- X 88SHOTS PER SECOND

MODE 18 ----------------- X 18 18 SHOTS PER SECOND

MODE 9 ---------------- X 99SHOTS PER SECOND

MODE 19 ----------------- X 19 19 SHOTS PER SECOND

MODE 10 ------------- X 10 10 SHOTS PER SECOND

MODE 20 ----------------- X 20 20 SHOTS PER SECOND

, then

X times

Mode #

Hold

tap

Release

GamerModz PS4 –SPS-X3 Ver 4.0 4

Adjustable rapid

Fire modes

Your GamerModz SPS-X3 Controller comes with 5 Programmable Modes -Modes 1 thru 5. To program a Mode,

you mustfirst select the mode (Reference “Toggle Between Rapid Fire Modes” on Page 2).

Once you are in the Mode you wish to Program (Only applies to Modes 1 thru 5) follow the instructions below

to Program that Mode. Your GamerModz SPS-X3 Controller will remember the Re-Programmable Mode settings

even after you turn your controller off.

Programming adjustable Rapid fire modes

Once you are in the Mode you wish to Program, Hold Down the Right Trigger , then Hold Up onD-Pad

until the LED begins to flash. Release both the Right Trigger and Up on D-Pad .

Once in Programming Mode you can adjust your shots per second by Tapping Up on D-Pad to Increase

Shots per Second and by Tapping Down on the D-Pad to Decrease Shots per Second. Note: Each time

you Tap the D-Pad, your Rate of Fire will Increase or Decrease 1 Shot per Second.

To test the Rapid Fire Rate, fire your weapon by pulling the Right Trigger . Adjust your Rapid Fire Rate by

Tapping Up orDown on the D-Pad untilthe desired smoothnessand rate of fire is achieved. Please

see graph on Page 4 for Reference.

Once you have the desired Rapid Fire Setting, Tap Right on D-Pad to lock in the rate of fire. The PS4 LED

will flash the number times corresponding to your rate of fire.For Example: 12 Shots per Second, The LED will

flash 12 times.

, then

= Lock Rate of Fire

= Decrease Rate of Fire

= Increase Rate of Fire

Until LED

Begins to Flash

, then

Hold

Release

Hold

GamerModz PS4 –SPS-X3 Ver 4.0 5

Optimizing

Adjustable rapid Fire

The below graph is a visual representation on how Adjustable Rapid Fire works for your GamerModz SPS-X3

Controller. This will help you manually adjust your RapidFire to the optimal rate of fire by understanding how

GamerModz Rapid Fire works.

Notes:

-It is possible for the RapidFire to be so fast that it does not register inthe game. If this occurs, try

slowing it down at times.

-Slowing automatic weapons down to reduce recoil and increase accuracy can be effective too.

GOAL

Weapon optimal rate

Rapid Fire Rate +

Faster than Max Fire Rate

Weapon is Stuttering orNot Firing at All

MAX Weapon Fire Rate

Weapon is Firing too Slowly

Slower than MAX Fire Rate

GamerModz PS4 –SPS-X3 Ver 4.0 6

Left Trigger Rapid fire mod

Left Trigger Rapid Fire allows you to assign rapid fireto your left trigger only. Note: You must first have a Rapid

Fire Mode turned on (See Page 2) to enable Left Trigger Mod.

To enable/disable Left Trigger Rapid Fire, Hold Down the Left Trigger and Tap Down on the D-Pad .

Then Release Left trigger .The PS4 Controller LED will flash one time to indicate that theLeft Trigger

Rapid Fire Mode has been toggled on/off.

dual Trigger Rapid fire mod (akimbo)

Dual Trigger Rapid Fire (Akimbo) allows you to assign rapid fire to both the Left Trigger and Right Trigger, giving

you a greater advantage when dual wielding. Note: You must first have a rapid fire mode turned on (See Page

2).

To enable/disable Dual Trigger Rapid Fire (Akimbo), Hold Down the Left Trigger and Right Trigger and

Tap Down on the D-Pad . Then Release Both Triggers . The PS4 Controller LED will flash one

time to indicate that the Dual Trigger Rapid Fire Mode has been toggled on/off.

, then

Hold

Tap

, then

Release

, then

Hold

Tap

, then

Release

GamerModz PS4 –SPS-X3 Ver 4.0 7

Burst mode

Burst Mode allows you to set the number of shots fired with each trigger pull. Your GamerModz SPS-X3

Controller comes with 4 Settings for Burst Mode.

To enable Burst Mode - Rapid Fire must first be enabled (See Page 2 “Toggle Between Rapid Fire Modes”)–

Hold Down the Right Trigger and Tap Right on the D-Pad the number of times corresponding to the

Burst Mode below. Then Release the Right Trigger .The PS4 Controller LED will flash the number of times

corresponding to the mode selected, indicating that Burst Mode has been toggled on.

To disable Burst Mode Hold Down the Right Trigger and Tap Right on the D-Pad 6 or more times,

then Release the Right Trigger .The PS4 Controller LED will flash one time to indicate that Burst Mode has

been toggled off.

MODE 2 -----------------X

ROUND BURST

MODE 3 -----------------X 3

ROUND BURST

MODE 4 -----------------X

ROUND BURST

MODE 5 -----------------X 5

ROUND BURST

TURN OFF --------------X

DISABLE

BURST MODE

Notes:

-You must have Rapid Fire Enabled to Enable Burst Mode. If Rapid Fire is not Enabled, Enabling Burst

Mode will fail.

Gameplay Tips:

-Combine Burst Modewith a Weapon’s Optimal Max Fire Rate to increaseaccuracy and save on Ammo.

, then

Hold

Tap

Mode #, then

Release

GamerModz PS4 –SPS-X3 Ver 4.0 8

INSTRUCTION MANUAL

LED PRO BUTTONS FOR PS4

(OPTIONAL ACCESSORY)

The GamerModz LED Pro Buttons allows you to remap the following buttons to either of the Pro Buttons:

A, B, X, Y, LB, RB, LT, RT, L3, R3, D-Pad Up, D-Pad Down, D-pad Left, D-Pad Right

NOTE: Guide Button,Menu Button and ViewButton Cannot be Remapped

Additionally, you we have given you the ability to have 5 Modes (Profiles) allowing you program 5 different

scenarios. The controllerwill save the profiles for you, even when you turn thecontroller off. You can change

any of the profilesat any time using the instruction below.

Cycling Through PRESETS

To cycle through the Presets hold the Left Thumbstick and Tap Left on the D-Pad the number of

times corresponding to the mode/preset you want. The Main LED will flash the number of times corresponding

to the mode/preset chosen. Additionally, if presets 1-5 are chosen, the LED Pro Mods will Light Up.

TAP UP ON D-PAD

PRESET

1 TIME

PRESET 1

2 TIMES PRESET 2

3 TIMES

PRESET 3

4 TIMES

PRESET 4

5 TIMES

PRESET 5

6 TIMES

OFF

, X Times

TAP

, then

Hold

Release

GamerModz PS4 –SPS-X3 Ver 4.0 9

Disabling Pro Buttons

To disable the Pro Buttons, Left Thumbstick and Tap Left on the D-Pad 6 Times . The PS4 Controller

LED will flash one time to indicate that the Pro Buttons have been off.

Programming a Preset for Button Remapping

To program a Pre-Set, first cycle to the Preset you wish to program (Refer to Instructions Above). Once you are

in the Preset you want to Program, hold the Left Thumbstick and Left on D-Pad until the Main LED

begins to flash indicating you are in programming mode.

Once you are in programming mode, simply hold the button you want to remap, tap the Pro Button you

would like to remap it to, then release. The Main LED will flash once letting you know that the remap was

successful. Repeat thisstep to assign another buttonto the other Pro Button.

Once you have finished assigning remaps to the Pro Buttons, hold the Left Thumbstick and Left on D-Pad

to save the Preset. The Main LED will flash5 times, letting youknow that you have successfully saved the

Preset.

You can then repeat the above steps to Program allof your presets. Note that your presets will be saved even

after you turn your controller off.

****** Important! Read Below! ******

The GamerModz LED Pro Buttons allows you to remap the following buttons/actions:

S, O, T, X, L1, R1, L2, R2, L3, R3, D-Pad Up, D-Pad Down, D-pad Left, D-Pad Right

NOTE: Guide Button,Menu Button and ViewButton Cannot be Remapped

, 6 Times

TAP

, then

Hold

Release

GamerModz PS4 –SPS-X3 Ver 4.0 10

Frequently asked questions

Q: My Controller is acting crazy! How do I get it to stop?

If you notice your controller is inputting all kinds of commands thatyou do not want, you may wantto

deactivate the unnecessarymods thatmay be active. If you are unsure what mods are active, simply perform

the MasterReset below.

Q: I’ve See GamerModz Controllers shoot really, really fast! But my Rapid Fire is really slow. What’s the

deal?

If your weapon is firing too slowly, it that either your weapon is not compatible with rapid fire (e.g. Rocket

Launcher) or it could mean that you do not have the Rapid Fire Shots per Second set high enough.

Q. My Rapid Fire is jumping or stuttering, how do I get it to stop?

If your rapid fire is not shooting consistently andseems to be stuttering, youhave set the Shots per Second too

high. This means the controller is trying to fire your weapon at a speed that is not compatible with the

particular game and weapon. Try decreasing your shots per second.

Q. What if I have a question that isn’t listed here!

That’s no problem, we’re happy to help. You can find us on Facebook, YouTube, Twitter, LiveChat via our Site or

by Phone. Give us a call Monday thru Friday, 9:00 am to 5:00 PM (EST) and a customer service representative

will assist you ASAP!

master reset

If you are experiencing problems with your controller and would like to reset to factory default settings, turn

your controller off and then back. Then simply Hold Down the Right Trigger and Left Trigger, Tap the sequence

below , then Release Left Trigger and Right Trigger

tap

Hold

, then

tap

Dieses Handbuch passt für folgende Modelle

Andere GamerModz Videospiel-Controller Handbücher

GamerModz

GamerModz xbox One – SPS-X3 Bedienungsanleitung

GamerModz

GamerModz Xbox One Rapid Fire X-3 Bedienungsanleitung

GamerModz

GamerModz PS4 Rapid Fire X-3 Bedienungsanleitung

GamerModz

GamerModz JUGGERNAUT Bedienungsanleitung

GamerModz

GamerModz Xbox One Rapid Fire X-2 Bedienungsanleitung

GamerModz

GamerModz PS3 Rapid Fire X-2 Bedienungsanleitung

Beliebte Videospiel-Controller Handbücher anderer Marken

Wasp

Wasp SL-6610 Bedienungsanleitung

JKG

JKG JKG2022A Bedienungsanleitung

Marvo

Marvo MG08 Bedienungsanleitung

Belkin

Belkin F8GBPC001 Bedienungsanleitung

GameSir

GameSir Z2 Bedienungsanleitung

Laser

Laser PCO-AGAMEC-BK Bedienungsanleitung

Cortex

Cortex VEXnet Bedienungsanleitung

Gioteck

Gioteck HF-1 Bedienungsanleitung

Nacon

Nacon DAIJA ARCADE STICK Bedienungsanleitung

Thrustmaster

Thrustmaster dual trigger Bedienungsanleitung

SHAKS

SHAKS S1+ Bedienungsanleitung

YCCTEAM

YCCTEAM Joy Con Bedienungsanleitung

Hyperkin

Hyperkin Smartboy Bedienungsanleitung

Nerf

Nerf DuraGrip Bedienungsanleitung

MoveMaster

MoveMaster MoveMaster Bedienungsanleitung

WinWing

WinWing Super Libra J1 Bedienungsanleitung

ECCI

ECCI Trackstar 6000 Series Bedienungsanleitung

Logitech

Logitech 963291-0403 - Attack 3 Joystick Bedienungsanleitung