Garmin Streetpilot C320 Bedienungsanleitung

Step 1: Conﬁgure Your c320

Press and hold the

Power button to turn

on the unit.

Note: A “Low Battery”

warning may appear when

you turn on the unit. Charge

the unit for three hours.

Answer the conﬁguration questions that appear. When you

see the screen that states “To use this unit, map data must be

installed,” you are ready to install software and map data.

Start Here

Open this setup guide and follow the instructions to set up your c320.

Complete all of the setup steps:

Step 1: Conﬁgure your c320

Step 2: Install software and map data

Step 3: Load maps

Do not connect the USB cable to your PC until you are instructed to do so.

StreetPilot® c320

This setup guide includes instructions to

conﬁgure your c320 and load maps.

To ensure a successful installation, follow

the steps outlined in this guide. Do not

connect the USB cable to your PC until you

are instructed to do so.

For information about using your c320, refer

to the

c320 Quick Reference Guide

located in

the box. Also see the

c320 Owner’s Manual

at www.garmin.com/products/sp320/.

setup guide

190-00435-02 Rev. C

Volume control

Power button

USB cable connector

Step 1: Conﬁgure Your c320

Press and hold the

Power button to turn

on the unit.

Note: A “Low Battery”

warning may appear when

you turn on the unit. Charge

the unit for three hours.

Answer the conﬁguration questions that appear. When you

see the screen that states “To use this unit, map data must be

installed,” you are ready to install software and map data.

Start Here

Open this setup guide and follow the instructions to set up your c320.

Complete all of the setup steps:

Step 1: Conﬁgure your c320

Step 2: Install software and map data

Step 3: Load maps

Do not connect the USB cable to your PC until you are instructed to do so.

StreetPilot® c320

This setup guide includes instructions to

conﬁgure your c320 and load maps.

To ensure a successful installation, follow

the steps outlined in this guide. Do not

connect the USB cable to your PC until you

are instructed to do so.

For information about using your c320, refer

to the

c320 Quick Reference Guide

located in

the box. Also see the

c320 Owner’s Manual

at www.garmin.com/products/sp320/.

setup guide

190-00435-02 Rev. C

Volume control

Power button

USB cable connector

Step 3: Load MapsStep 2: Install Software and

Map Data

When you have completed

the registration process, click

Done to load maps to your

c320.

Follow the series of instructions that appear on your computer.

When prompted, connect your c320 to your computer using

the enclosed USB cable.

Remove the DVD-ROM from the case and insert it into your

computer’s DVD-ROM drive.

If the startup ﬁle does not run automatically, click the Windows

Start button and select Run…. Type your DVD-ROM’s drive

followed by “Setup” (for example, “E:\Setup”). Click OK.

To load maps on your c320, follow the instructions on the

Map Install Wizard shown on your computer screen.

Click the regions

on the map that

you want to load

into your c320.

Click Next.

After your maps

are loaded, click

OK. Disconnect

the USB cable

from your unit.

To load new maps, turn on your c320 and reconnect the USB cable

to your unit and PC. The Map Install Wizard automatically appears.

Move the slider to zoom in

and out of the map.

Click the arrows to move

the map.

Selected map region. Click Next to load the maps to your c320.

Step 3: Load MapsStep 2: Install Software and

Map Data

When you have completed

the registration process, click

Done to load maps to your

c320.

Follow the series of instructions that appear on your computer.

When prompted, connect your c320 to your computer using

the enclosed USB cable.

Remove the DVD-ROM from the case and insert it into your

computer’s DVD-ROM drive.

If the startup ﬁle does not run automatically, click the Windows

Start button and select Run…. Type your DVD-ROM’s drive

followed by “Setup” (for example, “E:\Setup”). Click OK.

To load maps on your c320, follow the instructions on the

Map Install Wizard shown on your computer screen.

Click the regions

on the map that

you want to load

into your c320.

Click Next.

After your maps

are loaded, click

OK. Disconnect

the USB cable

from your unit.

To load new maps, turn on your c320 and reconnect the USB cable

to your unit and PC. The Map Install Wizard automatically appears.

Move the slider to zoom in

and out of the map.

Click the arrows to move

the map.

Selected map region. Click Next to load the maps to your c320.

Andere Handbücher für Streetpilot C320

Inhaltsverzeichnis

Andere Garmin Auto-Navigationssystem Handbücher

Garmin

Garmin 612 Bedienungsanleitung

Garmin

Garmin StreetPilot c550 Bedienungsanleitung

Garmin

Garmin nuvi2575 Gebrauchsanweisung

Garmin

Garmin StreetPilot c340 Bedienungsanleitung

Garmin

Garmin Map Pilot Bedienungsanleitung

Garmin

Garmin StreetPilot c330 Bedienungsanleitung

Garmin

Garmin 010-10307-00 - MapSource Fishing Hot Spots Bedienungsanleitung

Garmin

Garmin RV-IN1501 Bedienungsanleitung

Garmin

Garmin StreetPilot c330 Bedienungsanleitung

Garmin

Garmin zumo 595 Bedienungsanleitung

Garmin

Garmin StreetPilot c310 Bedienungsanleitung

Garmin

Garmin nuvi 800 series Gebrauchsanweisung

Garmin

Garmin Map Pilot Bedienungsanleitung

Garmin

Garmin RV-IN1501 Bedienungsanleitung

Garmin

Garmin StreetPilot c310 Betriebsanleitung

Garmin

Garmin Streetpilot C320 Bedienungsanleitung

Garmin

Garmin dezlCAM Bedienungsanleitung

Garmin

Garmin Zumo 600 Series Bedienungsanleitung

Garmin

Garmin GTN 625 Bedienungsanleitung

Garmin

Garmin StreetPilot c510 Referenzhandbuch

Garmin

Garmin CATALYST Bedienungsanleitung

Garmin

Garmin Montana 600 Bedienungsanleitung

Garmin

Garmin RV 795 Bedienungsanleitung

Garmin

Garmin STREETPILOT 2610 Bedienungsanleitung

Beliebte Auto-Navigationssystem Handbücher anderer Marken

Clarion

Clarion Navigation In-Car Entertainment Bedienungsanleitung

Rosen

Rosen DP-1001 Bedienungsanleitung

Alpine

Alpine INE-W970HD Bedienungsanleitung

Skoda

Skoda AMUNDSEN+ Bedienungsanleitung

Blaupunkt

Blaupunkt TravelPilot DX-N Bedienungsanleitung

Pioneer

Pioneer MZ360500EX Bedienungsanleitung

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Bedienungsanleitung

Kenwood

Kenwood DNN991HD Bedienungsanleitung

AvMap

AvMap Geosat 2C Bedienungsanleitung

Eonon

Eonon GE01B Bedienungsanleitung

Pioneer

Pioneer AVIC-Z920DAB Bedienungsanleitung

Nextar

Nextar M3-MX - Automotive GPS Receiver Bedienungsanleitung

Furrion

Furrion NV2200 Bedienungsanleitung

Mio

Mio MOOV 200-Series Bedienungsanleitung

Prestigio

Prestigio GeoVision 5150 Bedienungsanleitung

Hummer

Hummer 2006 H3 Bedienungsanleitung

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Konfigurationshandbuch

Mazda

Mazda 107006AN Bedienungsanleitung