Garmin A03250 Gebrauchsanweisung

A03250

Quick Start Manual

Introduction

WARNING

See the Important Safety and Product

Information guide in the product box for

product warnings and other important

information.

Device Overview

ÀGMRS antenna

ÁGPS antenna

ÂMini-USB port (under weather cap)

2.5 mm headset jack (under weather cap)

Charging the Battery

NOTICE

To prevent corrosion, thoroughly dry the

USB port, the weather cap, and the

surrounding area before charging or

connecting to a computer.

You must charge the device fully before

using it for the first time.

Before you can connect the straight

connector of the USB cable to your device,

you may need to remove optional mount

accessories.

NOTE: The device does not charge when

outside the approved temperature range

(page 8).

You can charge the battery using a USB

port on your computer if necessary, but

using the included AC adapter is the

fastest way to charge the device.

1Pull up the weather cap À from the

mini-USB port Á.

2 Quick Start Manual

2Plug the small end of the USB cable

into the mini-USB port.

3Plug the large end of the USB cable

into an AC adapter or a computer USB

port.

4If necessary, plug the AC adapter into

a standard wall outlet.

When you connect the device to a

power source, the device turns on.

5Charge the battery completely.

TIP: You can hold for two seconds

to view the charge level and place the

device into power saving mode.

Turning On the Device

Hold .

Device Operation

(Call key)

Press to transmit an

attention tone on the current

channel.

Hold to send an emergency

alert.

(Power key)

Press to adjust the backlight

and check battery level.

Hold to turn the device on

or off.

While charging, hold to put

the device in power saving

mode.

(Menu/zoom

key)

Press to open the menu for

a page or item.

Press twice to return to the

main menu.

Hold to adjust the zoom

level of the map.

(Back key)

Press to return to the

previous item or menu.

ÄThumb Stick Move to highlight a menu

item and control the map

cursor.

Press to select an item.

Hold to mark a waypoint.

Quick Start Manual 3

(Volume/

squelch key)

Press to adjust the volume

and squelch levels.

ÆPTT

(Push-to-

talk key)

Hold to transmit on the

current radio channel.

Acquiring Satellite Signals

It may take 30 to 60 seconds to acquire

satellite signals.

1Go outdoors to an open area.

2If necessary, turn on the device.

3Wait while the device searches for

satellites.

A question mark flashes while the

device determines your location.

4Select to open the status page.

shows the GPS/GLONASS signal

strength.

When the bars are full, the device has

acquired satellite signals.

Radio

In the United States and Canada, this

device uses General Mobile Radio Service

(GMRS) for two-way communication with

other compatible radio devices.

In Australia, this device uses UHF Citizen

Band Radio Service (UHF CBRS), and in

New Zealand, this device uses UHF

Personal Radio Service (PRS) for two-way

communication with other compatible radio

devices.

When communicating with other Garmin®

Rino devices, additional features are

available.

Opening the Radio App

You can manage your channel, code, and

other radio settings in the radio app.

From the home screen, select Radio.

Channels and Codes

To communicate with other Rino and

GMRS or UHF CBRS/PRS radio users,

you must be on the same channel.

For a list of channels for your region and

device, see the owner's manual.

NOTE: GMRS frequencies are regulated

by the FCC in the United States. To

transmit on GMRS frequencies, you must

obtain a license from the FCC.

Squelch codes allow you to filter calls from

other users on the same channel, so you

hear only the radios you want to hear. The

device has two different squelch modes,

4 Quick Start Manual

Continuous Tone Controlled Squelch

System (CTCSS) and Digital-Coded

Squelch (DCS). Calls on the channel that

are not using the same squelch code in

the same squelch mode are ignored.

For a list of squelch codes for your region

and device, see the owner's manual.

NOTE: Squelch codes do not make your

conversation private. Anyone on the same

channel can hear your conversation.

Selecting a Channel

1From the radio app, select Channel.

2Select a channel from the list.

Selecting a Squelch Code

1From the radio app, select Code.

2Select a code from the list.

NOTE: Selecting Off allows you to

hear everything on the channel.

Monitoring a Channel for Activity

You can monitor a single channel for any

activity, including static and weak voice

signals. This is helpful if a signal is going

out of range.

1From the radio app, select the channel

you want to monitor.

2Select Monitor.

Scanning Channels

You can scan the channels for voice

activity. This can help you find a channel

with light activity for your group to use, or

to find other radio users in the area.

From the radio app, select Scan.

Peer-to-Peer Positioning

You can send your location information to

other Rino users using peer-to-peer

positioning. Through peer-to-peer

positioning, you can also track the

movement of other Rino users on the

same channel and code, and navigate to

their locations.

Peer-to-peer positioning is enabled by

default, and your position information is

sent to other Rino users on the same

channel and code when you press the

PTT key (push-to-talk) or the key

(call).

NOTE: You can send location information

only once every 30 seconds, due to FCC

restrictions.

Polling Other Rino Users

You can request position updates for other

Rino users who are in your saved contacts

(page 6).

Quick Start Manual 5

1From the contacts app, select a saved

contact.

2Select Poll Location.

The location of the contact is updated

on the map.

Contacts

You can save information about another

Rino user as a contact. You can view

location information and navigate to the

location of users in your contacts list.

Saving a New Contact

The first time the device receives a peer-

to-peer positioning signal from another

Rino user, the new contact page appears.

To save the contact details or navigate to

the contact in the future, you must save

the new contact in your contacts list.

From the new contact page, select

Save.

The new contact is saved in your

contacts list.

Navigating to a Contact

1From the home screen, select

Contacts.

2Select a contact.

3Select View Map > Go.

4Follow to the contact's location.

Creating, Saving, and Sending Notes

You can send a short text note to Rino

users on your current channel and code.

NOTE: Notes transmit to all users on your

current channel and code, not just to your

saved contacts.

1From the home screen, select Notes.

2Select Send Note > New Note.

3Enter the note text.

Due to FCC regulations, you can enter

a maximum of 13 characters in a note.

4Select Done.

5Select Send and Save.

Navigation

You can navigate to a route, track,

waypoint, geocache, or any saved location

in the device. You can use the map or the

compass to navigate to your destination.

Navigating to a Destination

1From the home screen, select Where

To?.

2Select a category.

3Select a destination.

4Select Go.

6 Quick Start Manual

Opening the Map

You can browse the map or use the map

to view your position and route when

navigating to a destination.

From the home screen, select Map.

NOTE: You can use the Thumb Stick

to pan or browse the map.

Opening the Compass

When you are navigating to a destination,

you can use the compass to point toward

your destination or toward the next

waypoint in a route.

When you are not actively navigating, you

can use the compass to determine your

orientation.

From the home screen, select

Compass.

NOTE: The device uses GPS to determine

the heading on the compass, so you must

be moving to view accurate compass

information.

Customizing the Device

Adjusting the Backlight Brightness

You can adjust the backlight brightness to

maximize the battery life. For a longer

battery life, you should turn off the

backlight when using the device in

daylight.

1Select .

2Use the Thumb Stick to adjust the

backlight brightness.

Device Information

Long-Term Storage

When you do not plan to use the device

for several months, you should charge the

battery to at least 50% before you store

the device. You should store the device in

a cool, dry place with temperatures around

the typical household level. After storage,

you should fully recharge the device

before using it.

Product Updates

On your computer, install Garmin

Express™ (www.garmin.com/express).

This provides easy access to these

services for Garmin devices:

• Product registration

Getting the Owner's Manual

The owner's manual includes instructions

for using device features and accessing

regulatory information.

Go to www.garmin.com/

manuals/A03250.

Quick Start Manual 7

Specifications

Battery type Non-removable Lithium-ion

battery

Battery life Up to 13 hours of typical

usage.

Water rating IEC 60529 IPX7*

Operating

temperature

range

From -20º to 55ºC (from

-4º to 131ºF)

Charging

temperature

range

From 0º to 40°C (from 32º

to 104°F)

Radio channels

and output power

For complete information

on radio channels and

output power for your

device in your region, see

the owner's manual.

*The device withstands incidental

exposure to water of up to 1 m for up to

30 min. For more information, go to

www.garmin.com/waterrating.

8 Quick Start Manual

Inhaltsverzeichnis

Andere Garmin Zwei-Wege-Funkgerät Handbücher

Garmin

Garmin Rino 655t Bedienungsanleitung

Garmin

Garmin rino130 Bedienungsanleitung

Garmin

Garmin Rino 520HCx - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin RINO 110 - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin RINO 110 - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin RINO 110 - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin GPSMAP 130 Bedienungsanleitung

Garmin

Garmin Rino 655t Gebrauchsanweisung

Garmin

Garmin RINO 520 - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin Rino Bedienungsanleitung

Garmin

Garmin RINO 110 - Hiking GPS Receiver Bedienungsanleitung

Garmin

Garmin Rino 120 Betriebsanleitung

Garmin

Garmin Rino 655t Gebrauchsanweisung

Garmin

Garmin Rino 120 Bedienungsanleitung

Garmin

Garmin RINO 700 Bedienungsanleitung

Garmin

Garmin GPSCOM 190 Bedienungsanleitung

Garmin

Garmin RINO120 Bedienungsanleitung

Garmin

Garmin Rino 120 Bedienungsanleitung

Garmin

Garmin GPSMAP 520 - Marine GPS Receiver Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Garmin

Garmin Rino 130 Bedienungsanleitung

Garmin

Garmin Rino 130 Bedienungsanleitung

Garmin

Garmin GPSMAP 530 Bedienungsanleitung

Garmin

Garmin Rino 530HCx - Hiking GPS Receiver Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung

Motorola

Motorola T5583 Bedienungsanleitung

Motorola

Motorola DTR410 - On-Site Digital Radio Betriebsanleitung