DRILL PRESS MANUAL
We reserve the right of the amendment addition and deletion of the
specifications, explanatory wording, etc. printed in this manual
4
1: SAFETY
Safety Instructions For Power Tools
For Your Own Safety Read Instruction
Manual Before Operating This Equipment
1. Keep work area clear. Cluttered areas and benches invite injuries.
2. Consider work area environment . Do not expose tools to rain. Do not use tools in
damp or wet location. Keep work area well lit .Do not use tools in the presence of
flammable liquids or gases.
3. Guard against electric shock. Avoid body contact with earthed or grounded
surfaces.(e.g. pipes ,radiator ,ranges ,refrigerators ).
4. Keep other person away. Do not let persons ,especially children, involved in the work
touch the tool or the extension cord and keep them away from work area.
5. Store idle tools. When not is use , tools should be stored in a dry locked up place ,out
of reach of children.
6. Do not force the tool. It will do the job better and safer at the rate for which it was
intended.
7. Use the right tool . Do not force small tools to do the job of a heavy duty tool. Do not
use tools for purposes not intended, for example do not use circular saws to cut tree
limbs or logs.
8. Dress properly. Do not wear loose clothing or jewellery, they can be caught in moving
parts. Non-skid footwear is recommended when working outdoors . Wear protective
hair covering to contain long hair.
9. Use protective equipment .Use safety glass. Also use face or dust mask if cutting
operations is dusty.
10. Connect dust extraction equipment. If devices are provided for connection of dust
extraction and collection facilities ensure there are connected and property used.
11. Do not abuse the cord. Never yank the cord to disconnect it from the socket. Keep the
cord away from hear , oil and sharp edges.
12. Secure work. Where possible use clamps or a vice to hold the work. it is safer than
using your hands.
13. Do not overreach. Keep proper footing and balance at all times.
14. Maintain tools with care . Keep tools sharp and clean for better and safer performance.
Follow instruction for lubricating and changing accessories. Inspect tool cords
periodically and if damaged have them repaired by an authorized service facility .
Inspect extension cords periodically and replace if damaged .Keep handles dry, clean
and free from oil and grease.
15. Disconnect tool, When not in use ，before servicing and when changing accessories
such as blades, bit and cutters，disconnect tools from the power supply.
16. Remove adjusting keys and wrenches. Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool before turning it on.
17. Avoid unintentional starting . Ensure switch is “off” position when plugging in.
18. Use outdoor extension leads. When tool is used outdoor only extension cords intended
for outdoor use and so marked.
19. Stay alert. Watch what you are doing , use common sense and do not operate tool
when you are tired.
20. Check damaged parts . Before further use of the tool, it should be carefully checked to
determine that it will operate properly and perform its intended function. Check for
