GASLOCK INDY-CATOR-VOLT Bedienungsanleitung
Digital Board Voltage Display
Operating Instructions
2
Table of Contents
Page 3 .................................................... About INDY-CATOR-VOLT
Page 4 .................................................... Package content
Page 5 .................................................... Instrument installation
3
About INDY-CATOR-VOLT
After the simple installation, the INDYCATOR-
VOLT displays the current battery charge state.
The display colour can be selected freely and
adjusts perfectly to the vehicle‘s instrument
lighting.
4
3
1
2
Package content
1 Display instrument with power supply cable (1x)
2 Threaded ring (1x)
3 Cable terminal clamp (2x)
Figure 1
5
Instrument installation
1.2.1
Connect red line to battery 12 V (coming from
ignition). Connect black line to ground. Board
voltage is displayed after ignition activation.
1.2.2
LCD colour setting:
Press button on the rear of the display and keep
it pressed until the display colour is changed in
steps (16 colours). Release the button when the
desired display colour is reached.
1.1.1
At assembly in a universal instrument carrier:
Attach instrument in the instrument carrier with
a threaded ring.
Please read the respective assembly instructions
when using the Indy-Cator attachment set.
Fig. 4
Inhaltsverzeichnis
Andere GASLOCK Monitor Handbücher
