Gateway FPD1530 Bedienungsanleitung
APPENDIX G :
FCC ID : BEJLG508J
USER’S MANUAL
FPD1530monitoruser'sguide
P/NO.3828TUO197D(REV00-0204)
Printed in Korea
i
Contents
Using Your FPD1530 Monitor.......................................1
Connectingthemonitor ...............................................2
Startingthemonitor ..................................................5
Adjustingmonitorsettings .............................................6
Externalcontrols .................................................6
OSDoptions ....................................................7
Softwarecontrols ...............................................10
Videomodes ...................................................14
Powermanagement ................................................15
ENERGYSTAR ................................................15
Energydeclaration ..............................................15
Maintenance ......................................................16
Troubleshooting ....................................................17
Nopower......................................................17
Nopicture .....................................................17
Displaycolorsarewrong .........................................18
Picturehasshadowsor“ghosts” ...................................18
Colorisnotuniform .............................................18
Imageisnotsizedorcenteredproperly..............................18
Specifications......................................................19
Safety, Regulatory, and Legal Information .........................21
ii
1
www.gateway.com
Using Your
FPD 1530
Monitor
TheFPD 1530 monitor is a high-resolutioncolor LCD with:
■1024 ×768 maximum resolution
■Over 16 million colors
■Excellent contrast and legibility
■Space-saving and lightweight design
■Reduced power usage
2
Using YourFPD1530Monitor
www.gateway.com
Connecting the monitor
To connect the monitor:
1Position the computer and the monitor so you can easily reach the back
panel of each.
2Set the monitor upright, then feed thepower cableand theattached video
cable through the hole in the stand.
3Lay the monitor on its back.
3
Connecting the monitor
www.gateway.com
4Connect the power cord to the power connector on the underside of the
monitor.
5Return the monitor to its upright position.
6Make sure your computer is turned off, then connect the end of the
attached video cable to the matching video port on the back of your
computer.
4
Using YourFPD1530Monitor
www.gateway.com
7Plug the other end of the power cord into a properly grounded electrical
outlet.
5
Starting the monitor
www.gateway.com
Starting the monitor
To start the monitor:
1Press the power button on the monitor. The LED on the button turns on.
2Turn on the computer.
3After the computer is running, the LED on the monitor power button
should be green. Allow about 10 seconds for the display image to appear.
If the power LED is not green or you do not see a display image, check
the connections. For more troubleshooting information, see
“Troubleshooting” on page 17.
4Adjust the tilt of the monitor for the best viewing angle.
5Adjust the controls to get the best picture. After you see the Windows
desktop, press the AUTO/SET button to automatically adjust your display
image to the ideal settings. Adjust other monitor settings by using the
on-screen display (OSD). For more information, see “Adjusting monitor
settings” on page 6.
Important When adjusting your monitor settings,always press the
AUTO/SET button before entering the OSD. This will
automatically adjust your display image to the ideal
settings for the current screen resolution.
The bestscreenresolution is1024 ×768.
Power button
and LED
6
Using YourFPD1530Monitor
www.gateway.com
Adjusting monitor settings
You can adjust your display image by using external controls (located on the
monitor itself) and software controls (accessible in Windows). For more
information about software controls, see “Software controls” on page 10.
External controls
This monitor features an on-screen display (OSD) that lets you adjust and save
contrast, brightness, and other settings for the monitor. The monitor saves
changes you make to the settings, even if you turn off the monitor.
■OSD. Press to view the OSD. Press again to exit.
■Arrows.
OSD active: Press to select or adjust OSD options.
OSD inactive: Press and to adjust the contrast. Press and to
adjust the brightness.
■Auto/Set.
OSD active: Press to enter a selection in the OSD.
OSD inactive: Press the AUTO/SET button to automatically optimize your
monitor’s position, clock, and phase.
Menu selection arrows
OSD button AUTO/SET button
Andere Handbücher für FPD1530
1
Inhaltsverzeichnis
Andere Gateway Monitor Handbücher
Gateway
Gateway VX760 Bedienungsanleitung
Gateway
Gateway HD2202 Bedienungsanleitung
Gateway
Gateway HD1700 Bedienungsanleitung
Gateway
Gateway 46" PTV Handbuch
Gateway
Gateway FHX2402L Gebrauchsanweisung
Gateway
Gateway FPD1976W Bedienungsanleitung
Gateway
Gateway FPD1775W Bedienungsanleitung
Gateway
Gateway FPD1520 Bedienungsanleitung
Gateway
Gateway FHX2402L Bedienungsanleitung
Gateway
Gateway FPD1950 Bedienungsanleitung
Gateway
Gateway FHD2102 Bedienungsanleitung
Gateway
Gateway FHD2303L Bedienungsanleitung
Gateway
Gateway Gateway FPD 1500 Bedienungsanleitung
Gateway
Gateway FPD2185W Bedienungsanleitung
Gateway
Gateway HX1901QV Bedienungsanleitung
Gateway
Gateway FPD1975W Bedienungsanleitung
Gateway
Gateway FPD1975W Bedienungsanleitung
Gateway
Gateway VX755 Bedienungsanleitung
Gateway
Gateway EV Series Bedienungsanleitung
Gateway
Gateway FPD 2020 Bedienungsanleitung
