Gateway 7400 Bedienungsanleitung

7400 Server Rackmount

Installation Guide

A MAN US GW SERVER RACK R0 2/00

Contents

Preface............................................................. iii

Conventionsusedinthismanual .......................................iii

Informationaboutyoursystem .........................................iv

Accessingtheserversystemmanual .................................iv

Gettingadditionalinformation .......................................iv

1 Installation ......................................................1

Converting to rackmount . .............................................2

Removingexistingpanels ..........................................2

Installing the server side mounting brackets and front panel . . . . . . . . . . . . . . 5

Installingthesystemdrawersiderails ...................................7

Installingthecabinetmountingbracketsandmountingrails .................. 9

InstallingGatewaymountingbrackets ................................9

Installing the cabinet mounting rails onto Gateway brackets . . . . . . . . . . . . . . 10

Installinggenericmountingbrackets ................................12

Installingthecabinetmountingrailsontogenericbrackets ...............13

Mountingthesystemdrawerinthecabinet .............................. 15

Installingthecableretractor ..........................................18

InstallingacableretractorinaGatewaycabinet .......................18

Installingacableretractorinanon-Gatewaycabinet ...................19

Attachingthecablestotheretractor ................................20

Completingtheconnections ..........................................21

Connectingasinglesystemdrawer .................................21

Connectingmultiplesystemdrawers ................................22

Connectingthepower ............................................24

Turningonthesystemdrawer ........................................25

Turningoffthesystemdrawer ........................................ 26

Securingthesystemdrawerinthecabinet .............................. 26

Notices

4545 Town Centre Court

San Diego, CA 92121 USA

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or

transmitted by any means or in any form, without prior consent in writing from Gateway.

The information in this manual has been carefully checked and is believed to be accurate. However, changes

are made periodically. These changes are incorporated in newer publication editions. Gateway may improve

and/or change products described in this publication at any time. Due to continuing system improvements,

Gateway is not responsible for inaccurate information which may appear in this manual. For the latest product

updates, consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect,

special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual,

even if advised of the possibility of such damages.

In the interest of continued product development, Gateway reserves the right to make improvements in this manual

and the products it describes at any time, without notices or obligation.

Trademark Acknowledgments

AnyKey, black-and-white spot design, CrystalScan, Destination, EZ Pad, EZ Point, Field Mouse, Solo, TelePath,

Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are registered trademarks and

GATEWAY, Gateway Profile, Gateway Solo, Gateway Astro, green stylized GATEWAY, green stylized Gateway

logo, and the black-and-white spotted box logo are trademarks of Gateway, Inc. Intel, Intel Inside logo, and

Pentium are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and

Windows are trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned

herein are used for identification purposes only, and may be the trademarks or registered trademarks of their

respective companies.

Conventions used in this manual iii

Preface

Conventions used in this manual

Throughout this manual, you will see the following conventions:

Convention Description

ENTER Keyboard key names are printed in small capitals.

CTRL+ALT+DEL Aplussignmeanstopressthekeysatthesametime.

Setup Commands to be entered, options to select, and messages that

appear on your monitor are printed in bold.

User’s Guide Names of publications are printed in italic.

Important A note labeled important informs you of special

circumstances.

Caution A caution warns you of possible damage to equipment or

loss of data.

Warning A warning indicates the possibility of personal injury.

Information about your system

Accessing the server system manual

A comprehensive 7400 Server System Manual is located on the Server

Companion CD, which accompanied this system. To access this document

(in PDF format), place the Server Companion CD into the CD drive on a

system running a Window-based operating system, then follow the

instructions on the Welcome screen. To get the latest updates to your system

documentation, visit the technical support area of www.gatewayatwork.com.

Getting additional information

Visit the technical support area of www.gatewayatwork.com to find

information about your system or other Gateway products. Some types of

information you can access are:

■Hardware driver and program updates

■Technical tips

■Service agreement information

■Technical documents and component information

■Frequently asked questions (FAQs)

■Documentation for peripherals or optional components

■Online technical support

Installation

This guide provides information on converting your Gateway server to a

rackmount configuration and installing your Gateway server in a cabinet. The

Gateway rackmount conversion accessory kit includes:

■Gateway front panel assembly (installed on pre-configured systems)

■2 front panel side brackets

■2 pairs of Gateway mounting brackets (labeled FRONT and REAR)

■2 pairs of generic mounting brackets (short and long)

■2 28-inch (71.12 cm) cabinet slide rail assemblies

■1 cable retractor assembly

■Assorted size screws

■Miscellaneous size hardware

2Installation

Converting to rackmount

To convert the server to a standard 19-inch (48.26 cm) rack-mountable drawer,

you need to remove the unneeded hardware, then install the mounting

hardware and faceplate. If your system came configured for rack installation,

go to “Installing the system drawer side rails” on page 7.

Removing existing panels

To remove the bezel and the top panel:

1Turn off system power, then disconnect all the peripherals.

2Make sure the server is on a stable surface, such as a table or counter.

Warning In order to avoid injury or dropping the server, Gateway

recommends that two people lift the system drawer.

Converting to rackmount 3

3Unlock the bezel, if necessary, then depress the two tabs, one on each

side of the bezel.

4Pull the bezel away from the server.

5Remove the screw located at the top of the server.

6Slide the top panel forward, then pull it off.

Tab

Top panel

Screw

4Installation

To remove the outriggers and the feet:

1Turn the server upside down.

2If outriggers are installed, use your fingers or a flat-bladed screwdriver to

lift up on both of the retaining latches, then slide the outrigger towards

the center of the bottom panel.

3Remove the outrigger by pulling it up and away from the server.

4Remove the second outrigger by repeating Steps 2 and 3.

5Using a flat-bladed screwdriver, remove the feet.

Outriggers

Retaining latches

Foot

Converting to rackmount 5

Installing the server side mounting brackets

and front panel

To install the side mounting brackets:

1Turn the server on its left side.

2Align one of the server side mounting brackets with the screw holes on

the side (and towards the front) of the server, then attach the bracket

using six screws from the accessory kit.

3Attach the second server side mounting bracket to the opposite side of

the server.

Sidemounting

bracket

Side mounting

bracket

Andere Handbücher für 7400

Inhaltsverzeichnis

Andere Gateway Server Handbücher

Gateway

Gateway 980 Bedienungsanleitung

Gateway

Gateway 9515 Bedienungsanleitung

Gateway

Gateway 9415 Bedienungsanleitung

Gateway

Gateway 920 Bedienungsanleitung

Gateway

Gateway ALR 9200 Montageanleitung

Gateway

Gateway 910 Series Benutzerhandbuch

Gateway

Gateway GR380 F1 Bedienungsanleitung

Gateway

Gateway GT350 F1 Bedienungsanleitung

Gateway

Gateway E-9520T Bedienungsanleitung

Gateway

Gateway ALR 8300 Montageanleitung

Gateway

Gateway ALR 8200 Montageanleitung

Gateway

Gateway E-9425R Bedienungsanleitung

Gateway

Gateway E-9425R Bedienungsanleitung

Gateway

Gateway 9315 Bedienungsanleitung

Gateway

Gateway GR160 F1 Bedienungsanleitung

Gateway

Gateway 7450R Benutzerhandbuch

Gateway

Gateway E-9232T Bedienungsanleitung

Gateway

Gateway 7250R Benutzerhandbuch

Gateway

Gateway 935 series Bedienungsanleitung

Gateway

Gateway ALR 8200R Bedienungsanleitung

Gateway

Gateway ALR 9000 Montageanleitung

Gateway

Gateway 8450R Benutzerhandbuch

Gateway

Gateway E-9722R Bedienungsanleitung

Gateway

Gateway 995 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung