GBC FUSION 3000L Bedienungsanleitung

start here

démarrez ici

starten sie hier

iniziare qui

FUSION

™3000L&3100L

A4&A3 LAMINATORS

GB instruction manual 4

F manuel d’utilisation 10

D bedienungsanleitung 16

I manuale d’istruzioni 22

FUSION

™3000L&3100L

A4&A3 LAMINATORS

4register this product online at www.accoeurope.com

faster to the finish!

Welcome to the new GBC Fusion 3000L and 3100L

laminators which allows lamination to be completed quickly

and simply with GBC quality lamination.

For best lamination results and performance, use only GBC

branded pouches.

Please take a little time to study these instructions to ensure

you get the best results out of your machine.

Electrical shock hazard.

Do not open. No user

servicable parts inside.



service personnel.

WARNING

The following warning is found on the

product in several languages.

This safety message means that you

could be seriously hurt or killed if you

open the product and expose yourself

to hazardous voltage.

safety instructions

Your safety as well as the safety of others is important to ACCO® Brands. In this

instruction manual and on the product are important safety messages. Read these

messages carefully.

The safety alert symbol precedes each safety message in this instruction manual.

This symbol indicates a potential personal safety hazard that could hurt you or others,

as well as cause product damage or property damage.

Electrical Fusion 3000L A4:

220-240V AC /

50Hz/60Hz / 3.5A / 850W

Fusion 3000L A3:

220-240V AC /

50Hz/60Hz / 5.0A / 1200W

Fusion 3100L A3:

220-240V AC /

50Hz/60Hz / 6.5A / 1550W

Machine Dimensions A4: 370x107.5x80mm

A3: 465x109x81mm

Machine Weight A4: 1.3kg

A3: 1.64kg

Maximum Pouch Width A4: 241mm

A3: 303mm

Maximum Pouch

Thickness

3000L

2x125 micron (total 250)

3100L

2x175 micron (total 350)

Maximum Thru-put

Thickness

0.7mm

Warm-Up Time 3000L

Approximately 1.5 minutes

3100L

Approximately 1.5 minutes

Speed 3000L 500 mm per minute

3100L 800 mm per minute

technical specifications

service

Do not attempt to service or repair the pouch laminator yourself. Unplug the unit and contact an

authorised GBC service representative for any required repairs.

FUSION™3000L&3100L A4&A3 LAMINATORS 5

points to note

• Use this unit only for its intended use of laminating documents

• Do not laminate an empty pouch

• The unit must be connected to a supply voltage corresponding to the electrical rating

shown on the unit

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

• Do not use a carrier with this machine

• Ensure the machine is clear of pouches prior to starting the next pouch

• Clean the lamination rollers on a regular basis

• Maximum A4 document pouch 303mm x 210mm on A4 GBC Fusion 3000L laminator

• Maximum A3 document pouch 426mm x303mm on A4 GBC Fusion 3100L laminator

• Active anti jam feature may not detect issue on smaller items

• Failure to comply will result in damage and invalidate guarentee

6register this product online at www.accoeurope.com

getting ready to laminate

NOTE: Your new laminator may emit

a slight odour during the initial

operation. Its is normal and will

diminish after a few hours of

operation.

Easy Set Up

1 Remove the plastic exit tray from the box and place into the two holes on the back of the

laminator and extend to use. Ensure that there is sucient space behind the laminator for the

item to be removed.

2 Take the electrical plug and place in an appropriate power source, which is near the table you

intend to use.

3 The laminator will respond with a single beep and a sequence of brief ashes across the control

panel.

Touch Control

4 To use the laminator gently tap the ‘power on’ button.

NOTE: Following “power on” it will

automatically set to the 75mic.

5 An orange ‘ ’ will ash indicating that the laminator is warming up to the setting which is

indicated by a white light on the control panel.

6 If setting indicated by white light on the control panel is not approporaite for your pouch

thickness, select the appropriate pouch setting by tapping the micron setting which is indicated

on pouch packaging. Your new selection will be indicated by a white light on control panel.

loading the pouch

1 Take your item to be laminated and place in to the appropriate sized laminating pouch,

ensuring it is rmly located along the sealed edge. This is to help ensure that you get optimal

quality output.

Before laminating important or unique documents, always run a test pouch through

the laminator using a similar type document.

SEALED EDGE

A3, A4, A5, etc. Irregular shaped item

SEALED EDGE

NOTE: Do not cut pouches prior to

lamination.

FUSION™3000L&3100L A4&A3 LAMINATORS 7

NOTE: During warm up, the orange light

next to the ‘ ’ mark will be ashing

until the machine is ready to use.

With Fusion 3100L you cannot feed

a pouch into the laminator until

green ‘tick ’ is illuminated.

Visual & Audible Ready Alerts

7When the laminator is ready to use the green light next to the ‘tick ’ is illuminated (shown in

gure) and a series of 2 beeps are heard.

8register this product online at www.accoeurope.com

3 Upon exiting remove your laminated item immediately to ensure optimal quality.

4 Do not force guides tightly against pouch. Move guides to an appropiate setting to allow pouch

to be fed in without touching guides.

5 When you are nished laminating tap the ‘power’ button and if required remove the tray, unplug

and store accordingly.

Remove your laminated item

immediately to ensure the

best quality and nish

2 Feed the sealed edge of the pouch, into the laminator between the guides. The laminator will

grip the pouch and guide it through to the exit tray.

NOTE: Do not force guides

against pouch

laminating

1 On the front of the laminator there are adjustable guides to help you feed your pouch accurately.

Move the guides to appropriate line which matches your pouch/ item to be laminated.

Accurate

Feed Guides

cleaning

mWARNING: UNPLUG THIS PRODUCT BEFORE CLEANING THE EXTERIOR.

WIPE EXTERIOR ONLY WITH A DAMP CLOTH AND DO NOT USE

DETERGENTS OR SOLVENTS.

Regularly feed a cleaning card or sheet of paper through the laminator to clean the

rollers. Cleaning sheet order code: EK50000.

guarantee

Operation of this machine is guaranteed for two years from date of purchase, subject to normal

use. Within the guarantee period, ACCO Brands Europe will at its own discretion either repair

or replace the defective machine free of charge. Defects due to misuse or use for inappropriate

purposes are not covered under the guarantee. Proof of date of purchase will be required.

Repairs or alterations made by persons not authorised by ACCO Brands Europe will invalidate

the guarantee. It is our aim to ensure that our products perform to the specications stated.

This guarantee does not aect the legal rights which consumers have under applicable national

legislation governing the sale of goods.

additional features

Intelligent Status Alert

If pouch misfeeds or a jam starts to occur a series of

beeps will will be heard to alert the user to take action

along with a red ashing light with ‘jam icon ’.

Manual Release

Fusion 3000L A3 & A4 Laminator

Press and hold the release button ( ) and pull the

pouch towards you out of the laminator.

Manual Reverse

Fusion 3100L A3 Laminator

Press and hold reverse button (indicated by

reverse ) until the pouch completely reverses

out of the laminator.



For added safety and environmental reasons the laminator will automatically go into

sleep mode after 30 minutes of inactivity. You will hear a single beep before this occurs

FUSION™3000L&3100L A4&A3 LAMINATORS 9

plastifie plus rapidement !

Merci d’avoir choisi les plastieuses GBC Fusion 3000L

et/ou 3100L au fonctionnement simple et rapide, qui

orent la qualité de plastication supérieure associée à

la marque GBC.

Elles sont parfaitement conçues pour les utilisateurs qui

plastient des documents assez fréquemment. Idéales

pour une plastication souple à rigide dans des bureaux.

Veuillez lire et suivre le mode d’emploi ci-dessous.

Risque de choc électrique. Ne

pas ouvrir. Aucune des pièces se

trouvant à l’intérieur ne peut être

réparée par l’utilisateur. En cas de

panne, s’adresser à du personnel



AVERTISSEMENT

L’avertissement suivant gure sur le

produit dans plusieurs langues.

Ce message d’avertissement signie que

vous risquez de vous blesser gravement

ou de vous tuer si vous ouvrez le produit et

vous exposez à une tension dangereuse.

consignes de sécurité

ACCO® Brands Europe se soucie de votre sécurité ainsi que de celle d’autrui. Des

messages de sécurité importants sont donnés dans ce manuel d’instructions et sur le

produit. Veuillez les lire attentivement.

Ce symbole d’avertissement précède chaque message de sécurité donné dans ce

manuel.

Il indique un danger potentiel susceptible de provoquer des blessures personnelles

ainsi que des dommages au produit ou à d’autres biens matériels.

10 enregistrez ce produit en ligne à www.accoeurope.com

Andere Handbücher für FUSION 3000L

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere GBC Laminiergerät Handbücher

GBC

GBC DocuSeal 40P Bedienungsanleitung

GBC

GBC H320 Bedienungsanleitung

GBC

GBC Pro-Tech NORD ORCA-I SP Bedienungsanleitung

GBC

GBC Talon 44 CE Bedienungsanleitung

GBC

GBC Arctic Titan 1040WFC Bedienungsanleitung

GBC

GBC FOTON 30 Automated Laminator Bedienungsanleitung

GBC

GBC Fusion 5000L Bedienungsanleitung

GBC

GBC Falcon 60+ Bedienungsanleitung

GBC

GBC FOTON 30 Automated Laminator Bedienungsanleitung

GBC

GBC Fusion 5000L Bedienungsanleitung

GBC

GBC Docuseal 2700 Bedienungsanleitung

GBC

GBC F - 160 CE Bedienungsanleitung

GBC

GBC OORCA-III Bedienungsanleitung

GBC

GBC FUSION 6000L Bedienungsanleitung

GBC

GBC DocuSeal 120 Bedienungsanleitung

GBC

GBC 54C Bedienungsanleitung

GBC

GBC A4 Blizzard Bedienungsanleitung

GBC

GBC DOCUSEAL 1200 Bedienungsanleitung

GBC

GBC GBC A4 POLAR Bedienungsanleitung

GBC

GBC HeatSeal Sprint H950 Betriebsanleitung

GBC

GBC GBC4250 Bedienungsanleitung

GBC

GBC PRO SERIES Bedienungsanleitung

GBC

GBC Inspire Bedienungsanleitung

GBC

GBC Arctic Eagle 1600 Bedienungsanleitung

Beliebte Laminiergerät Handbücher anderer Marken

Renz

Renz HT 330 L Bedienungsanleitung

Gfp

Gfp 44TH Bedienungsanleitung

Lapis

Lapis Lamina006 Bedienungsanleitung

Hama

Hama L44B Bedienungsanleitung

PAVO

PAVO FLORIDA Bedienungsanleitung

M-Triangel

M-Triangel MT-102 Bedienungsanleitung

Akiles

Akiles PROLAM 230 Bedienungsanleitung

D&K

D&K Masterpiece 550 Bedienungsanleitung

Falcon

Falcon F-40 Bedienungsanleitung

LEITZ

LEITZ EasyLaminator A4 Bedienungsanleitung

LEITZ

LEITZ coldLAM CS9 Bedienungsanleitung

kala

kala Starter 1080 Bedienungsanleitung

Fellowes

Fellowes Venus A3 Bedienungsanleitung

Qomolangma

Qomolangma FMJ-1400-WA-PLUS Bedienungsanleitung

Opus

Opus Coverator 330 Bedienungsanleitung

ALDI

ALDI OL 250-L Bedienungsanleitung

Phoenix

Phoenix 2700-DH Bedienungsanleitung

acropaq

acropaq AL-3400 Bedienungsanleitung