GCC Technologies LaserPro StellarMark CIIA-Li Bedienungsanleitung

LaserPro StellarMark CIIA-Li User Manual | 1

4F., No.236, Fude 2nd Rd., Xizhi Dist., New Taipei City 22151, Taiwan 886-2-6616-6692 Fax:886-2-2694-6875

StellarMark CIIA-Li

User Manual

www.delinit.by

LaserPro StellarMark CIIA-Li User Manual | 2

TABLE OF CONTENTS

CHAPTER

1 SAFETY............................................................................................4

1.1 PRINCIPLES OF CO2 LASER........................................................................................ 5

1.2 SAFETY RATINGS........................................................................................................ 5

1.3 THE SAFETY INTERLOCK SYSTEM................................................................................ 5

1.4 THE SAFETY LABELS .................................................................................................. 5

1.5 SAFETY MEASURES.................................................................................................... 8

1.6 OPERATING ENVIRONMENT ......................................................................................... 9

CHAPTER

2 U

.....................................................11

2.1 UNPACKING AND UNLOADING........................................................................................... 12

2.2 CONTENTS AND ACCESSORIES CHECKLIST ....................................................................... 12

CHAPTER

3 MECHANICAL OVERVIEW ..........................................................13

3.1 LASER MARKER .............................................................................................................. 14

3.2 MACHINE DIMENSION....................................................................................................... 16

CHAPTER

4 WORKING DISTANCE..................................................................18

4.1 RECOMMENDED WORKING DISTANCE ............................................................................... 19

4.2 PYRAMID FOCUS TOOL .................................................................................................... 20

CHAPTER

5 MACHINE SETUP..........................................................................21

5.1 POWERING UP THE MACHINE ........................................................................................... 22

5.2 POWER CABLE CONNECTION ........................................................................................... 22

5.3 I/O INTERFACE DEFINITIONS............................................................................................. 25

5.4 I/O INTERFACE INSTALLATIONS......................................................................................... 30

CHAPTER

6 SOFTWARE SETUP......................................................................35

6.1 RECOMMENDED COMPUTER CONFIGURATION ................................................................... 36

6.2 SOFTWARE INSTALLATION FOR WINDOWS SYSTEM............................................................ 36

6.3 SOFTWARE INSTALLATION FOR MAC SYSTEM................................................................... 45

CHAPTER

7 LENS ADJUSTMENT....................................................................53

7.1 IMPORT LENS PARAMETER............................................................................................... 54

7.2 LENS PARAMETER CARD.................................................................................................. 58

7.3 LENS PARAMETER ADJUSTMENT ...................................................................................... 61

CHAPTER

8 BASIC MAINTENANCE ................................................................65

LaserPro StellarMark CIIA-Li User Manual | 3

8.1 CLEANING THE LENSES.................................................................................................... 66

CHAPTER

9 APPENDIX......................................................................................68

LaserPro StellarMark CIIA-Li User Manual | 4

Chapter

Safety

Principles of CO

Laser

Safety Ratings

The Safety Interlock System

Safety Labels

Safety Measures

Operating Environment

www.delinit.by

LaserPro StellarMark CIIA-Li User Manual | 5

1.1 Principles of CO2 Laser

LASER is the acronym for Light Amplification by Stimulated Emission of Radiation. A CO2

laser works by electrically stimulating the molecules within a carbon dioxide gas mixture.

When focused through a lens, this highly-intense, invisible beam will vaporize many

materials. Depending on the speed and intensity of the projected beam, a CO2 laser may

be used to engrave or cut through a wide variety of materials.

1.2 Safety Ratings

Laser marking systems that have the CDRH safety rating of Class 4R and the StellarMark

CIIA-Li has been equipped with a red guidance pointer. This red dot allows the operator to

safely see the focal point of the laser beam. It gives StellarMark CIIA-Li a rating of 4R when

it is integrated with a safety door while operation.

1.3 The Safety Interlock System

With the optional item of safety shield, it gives the StellarMark CIIA-Li marking systems that

automatically shut off the laser when the door is opened. There are some magnets on the

side of safety door, which activate this safety mechanism. Do not attempt to remove or

modify these magnets or any other component of the safety interlock system.

1.4 The safety Labels

According to CDRH standards, all fixed or removable covers that allow access to a laser

beam must have the appropriate laser warning labels attached to them. These warning

labels must be clearly visible to the operator prior to removing the cover. Additional labels

must be applied inside of the machine and be visible in the event the covers are removed. A

label clearly displaying the manufacturer’s name, date of manufacture, description of

product, model number, serial number, and compliance statement must be attached to the

outside of the machine.

In compliance with CDRH standards, the required warning labels are affixed at the time of

manufacture to the LaserPro StellarMark CIIA-Li in the appropriate locations. These labels

are not to be modified in any way or removed for any reason. Please familiarize yourself

with the specific labels and their locations on the machine. Below is a list of all the safety

labels and their locations on the machine.

LaserPro StellarMark CIIA-Li User Manual | 6

Product Label

This label is located at the right-back side of machine. All the product information such

as Serial Number, Model Numbers, Laser Power and Electric power can be found here.

Before requiring any tech support, always provide service person the information on

this label.

LaserPro StellarMark CIIA-Li User Manual | 7

CDRH Label

This label indicates the class level of CDRH.

CE Label

This label indicates the class level of CE

Emergency Stop Label

This label indicates the emergency stop button. You can find this label on the left side

of the power supply unit

LaserPro StellarMark CIIA-Li User Manual | 8

Warning Label

Warning Label is written all the necessary information to be aware of in every

operation.

1.5 Safety Measures

zLASER RADIATION WARNING: Exposure to laser radiation may result in

physical burns and severe eye damage. Proper use and regular maintenance of

this machine is important to the safety of all people in the immediate area.

zPrior to operation, carefully read and familiarize yourself with the warning labels

located on both your laser system and in this manual.

zNever leave the machine unattended during the laser cutting and engraving

process. The laser may ignite combustible materials. A well-maintained fire

extinguisher and operational smoke or fire detector should be kept in the vicinity of

the machine.

zAlways wear safety goggles when the laser system is in operation. Reflective

materials such as mirrors, enameled brass and anodized aluminum may

LaserPro StellarMark CIIA-Li User Manual | 9

partially-reflect some of the invisible laser radiation. Severe eye damage may

occur if appropriate safety goggles are not worn.

zConnect the machine to a properly grounded power outlet. Ensure the voltage of

the power source is identical to the voltage of the machine.

zDo not attempt to modify or disassemble the laser module.

zDo not attempt to remove or modify any component of the machine’s laser

interlock safety system.

zEnsure the immediate work area of the machine is well-ventilated. Odors, vapors,

and dust are byproducts generated during the laser marking and cutting process.

An exhaust system is recommended. Please contact GCC or your local GCC

distributor for more information.

zDo not laser heat-sensitive surfaces or materials that may generate toxic fumes,

such as PVC and Teflon.

zRegularly clean and maintain your machine according to our cleaning and

maintenance instructions. Doing so will ensure a machine that will operate

effectively and safely over a long period of time.

1.6 Operating Environment

Please follow the guidelines when considering a suitable location to set the LaserPro

StellarMark CIIA-Li. Improper work environments may lead to operational malfunction

and/or unsafe working conditions.

The LaserPro StellarMark CIIA-Li should be placed and operated in a clean

environment, avoid places where the machine is exposed to high temperatures, dust,

or high humidity

NOTE

Each LaserPro laser machine is shipped with a single pair of safety goggles.

If additional safety goggles are required, please contact GCC directly or an

authorized GCC distributor. If you wish to purchase one on your own, please

make sure the safety goggles meet these requirements:

190 - 398 nm OD5+

10,600 nm OD5+

isible Li

ht Transmission: 92.9

LaserPro StellarMark CIIA-Li User Manual | 10

zKeep the machine where the room temperature is between 15 – 30 degrees

Celsius or 58 – 85 degrees Fahrenheit.

zAvoid small, enclosed areas where a considerable amount of dust is present.

zAvoid areas where the humidity is above 70% or where the temperature is near

the dew point.

zSetup the machine to be apart from the wall for at least 40cm (1.5 feet).

zChoose a flat surface that is not exposed to high levels of vibration.

zBe sure that your mounting platform has been securely fastened to the table, stand,

or floor.

zChoose a location that is large enough to accommodate the machine, the

computer and a work/storage table.

zHave a fire extinguisher close to the working location at all times.

zMake sure your smoke/fire detecting system is functioning.

Inhaltsverzeichnis

Andere GCC Technologies Industrieanlagen Handbücher

GCC Technologies

GCC Technologies Laser Pro DFS Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung