GDC AIB-2000 Bedienungsanleitung

USER MANUAL FOR

AIB-2000 IO (INPUT-OUTPUT) BOX

April 01st, 2021

-1 - 
April 01st, 2021 
USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX 
 
User Manual 
TABLE OF CONTENTS 
 
 
TABLE OF CONTENTS 
1DIMENSIONS.................................................................................................3 
2SPECIFICATIONS .........................................................................................4 
3FRONT AND REAR PANELS........................................................................5 
4ROUTING DIAGRAM.....................................................................................6 
5ETHERNET/ AES/EBU/ ANALOG OUT CONNECTION...............................7 
6SAFETY INSTRUCTIONS .............................................................................8 
7REGULATORY INFORMATION..................................................................10
8INTRODUCTION TO AIB-2000....................................................................11
8.1 About the AIB-2000...................................................................................................... 11 
8.2 Unpacking and Checking for Shipping Damage ...................................................... 11 
8.3 Packing Material .......................................................................................................... 11 
9AIB-2000 CONNECTIONS...........................................................................12 
9.1 Installation.................................................................................................................... 12 
9.2 AC Mains Supply ......................................................................................................... 12 
9.3 Routing Diagram.......................................................................................................... 12 
9.4 Front Panel................................................................................................................... 13 
 Front NON-SYNC IN...........................................................................................................13 
 MIC INPUT ..........................................................................................................................13 
 SELECTOR.........................................................................................................................13 
9.5 Rear Panel .................................................................................................................... 14 
 7.1 Output...........................................................................................................................14 
 AES/EBU in.........................................................................................................................14 
 Ethernet in..........................................................................................................................14 
 LCR mon.............................................................................................................................14 
 H/I and V/I ...........................................................................................................................14 
 7.1 Input..............................................................................................................................15 

-2 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

TABLE OF CONTENTS

Rear NON-SYNC IN............................................................................................................15

10 AIB-2000 REMOTE CONTROLS.................................................................16

11 AIB-2000 WEB INTERFACE.......................................................................17

11.1 Default Access Credentials ........................................................................................ 17

11.2 Resetting AIB-2000 to Default Factory Settings....................................................... 17

11.3 Accessing the Web Interface...................................................................................... 18

11.4 About the AIB-2000 Web Interface............................................................................. 18

Control................................................................................................................................18

Config →IP config.............................................................................................................19

Config →Misc config........................................................................................................20

Config →Reboot ...............................................................................................................21

-3 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

DIMENSIONS

1 DIMENSIONS

Figure 1: Dimensions of AIB-2000 Unit

-4 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

SPECIFICATIONS

2 SPECIFICATIONS

Frequency range

20 Hz - 20,000 Hz

Microphone input

XLR female

Microphone switch

Microphone in on/off

Microphone input HPF

100 Hz 12 dB/oct switchable

Microphone input phantom supply

+48 V switchable

Microphone input maximum gain

+60 dB

Non-Sync input

2 x XLR female (front)

2 x RCA (rear)

switchable

Analog unbalanced 7.1 input

8 x RCA

Analog H/I output

1 x RCA

Analog V/I output

1 x RCA

Monitoring output L+C+R summed

1 x RCA

Analog balanced output

8 x 3-pin Phoenix

AES/EBU input

1 x RJ-45

Ethernet input

1 x RJ-45

Input selector

Non-sync / 7.1 Analog / AES/EBU

Mains plug

C14

Mains nominal voltage

90 V - 265 V / 50 - 60 Hz

Maximum power consumption

10 W

Rack height

Dimensions (WxHxD)

483 x 44 x 158 mm

Shipping Dimensions (WxHxD)

550 x 70 x 255 mm

Net weight

2.1 kg

Shipping weight

3.2 kg

Table 1

-5 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

FRONT AND REAR PANELS

3 FRONT AND REAR PANELS

Figure 2: Front and Rear Panels of AIB-2000

ON-SYNC IN Left+Right XLR.

Front XLR - Back RCA NON-SYNC INswitch.

MIC IN XLR.

Phantom +48V switch.

HPF 100 Hz switch.

MIC IN gain knob.

MIC IN switch.

NON-SYNC selector.

7.1 Analogselector.

AES/EBU selector.

Mains switch.

C14 Mains socket.

7.1 Output phoenix sockets.

Serial number space –DO NOT remove,

scratch or modify serial number as this will

immediately void the warranty.

Ethernet inputconnector.

AES/EBU inputconnector.

LCR monitor output.

V/I output.

H/I output.

7.1 Input.

NON-SYNC IN Left+Right RCA.

Table 2

-6 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

ROUTING DIAGRAM

4 ROUTING DIAGRAM

Figure 3: Routing Diagram for AIB-2000

-7 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

ETHERNET/ AES/EBU/ ANALOG OUT CONNECTION

5 ETHERNET/ AES/EBU/ ANALOG OUT CONNECTION

Analog outputs

ETH In

AES/EBU In

-8 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

SAFETY INSTRUCTIONS

6 SAFETY INSTRUCTIONS

EXPLANATIONS OF GRAPHICAL SYMBOLS

The triangle with the lightning bolt is used to alert the user to the risk of electric shock.

The triangle with the exclamation point is used to alert the user to important operating or

maintenance instructions.

The CE-mark indicates compliance with low voltage and electromagnetic compatibility.

Symbol for earth/ground connection.

Symbol indicating that the equipment is for indoor use only.

Symbol for conformity with Directive 2002/96/EC and Directive 2003/108/EC of the European

Parliament on waste electrical and electronic equipment (WEEE).

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTEMPT TO OPEN

ANY PART OF THE UNIT. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS,

DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.

THE MAINS PLUG OF THE POWER SUPPLY CORD MUST REMAIN READILY

ACCESSIBLE.

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE, DRIPPING OR

SPLASHING LIQUIDS. OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD

NOT BE PLACED ON THIS APPARATUS.

WHEN THE UNIT IS INSTALLED IN RACK CABINET OR A SHEFL, MAKE SURE THAT IT

HAS SUFFICIENT SPACE ON ALL SIDES TO ALLOW FOR PROPER VENTILATION (50

CM FROM THE FRONT AND REAR VENTILATION OPENINGS).

CONNECTIONS TO THE MAINS SHALL BE DONE ONLY BY AN ELECTROTECHNICALLY

SKILLED PERSON ACCORDING TO THE NATIONAL REQUIREMENTS OF THE

COUNTRIES WHERE THE UNIT IS SOLD.

-9 -

April 01st, 2021

USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX

User Manual

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions carefully.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this equipment near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not use near heat sources such as stoves, heat registers, radiators or other equipment

(including amplifiers) that produces heat.

9. Do not use the unit near open fire sources.

10. Connect the unit only to the electric network with grounding. Use only electric plugs

that provide grounding.

11. Protect the power cord from being walked on, pinched or otherwise damaged.

12. Use only accessories specified by the manufacturer.

13. Unplug this unit during lightning storms or when unused for long periods.

14. Refer all servicing to qualified service personnel. Servicing is required when the system has

been damaged in any way, such as power supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does

not operate normally or has been dropped.

15. WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS SYSTEM UNIT TO RAIN OR MOISTURE.

THIS UNIT CONTAINS POTENTIALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC

SHOCK OR HAZARD, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

INSTALLING OF THIS UNIT MUST BE PERFORMED ONLY BY QUALIFIED TRAINED

PERSONNEL FOLLOWING APPLICABLE SAFETY RULES. DO NOT ALLOW INSTALLING OF

THIS UNIT IF INSTALLATION HARDWARE IS BROKEN, BENT, PARTS ARE MISSING OR IS

OTHERWISE DAMAGED.

Andere Handbücher für AIB-2000

Inhaltsverzeichnis

Andere GDC Heimkinosystem Handbücher

GDC

GDC SX-2001 Kurzanleitung

Beliebte Heimkinosystem Handbücher anderer Marken

Samsung

Samsung HT-ES4200K Bedienungsanleitung

Harman Kardon

Harman Kardon HS 100 Bedienungsanleitung

Samsung

Samsung HT-P10 Bedienungsanleitung

Philips

Philips HTS5131 Betriebsanleitung

Goodmans

Goodmans GDVD19SWS Bedienungsanleitung

Moxi

Moxi media center Bedienungsanleitung

Samsung

Samsung HT-EM35 Bedienungsanleitung

LG HE903PAW Bedienungsanleitung

Bose

Bose SoundTouch 520 Bedienungsanleitung

Sony

Sony BDV-N990W Bedienungsanleitung

Manta

Manta GK-500 Bedienungsanleitung

Sharp

Sharp SBW800 Bedienungsanleitung

Philips

Philips HTS3541 Bedienungsanleitung

LG LHT799 Bedienungsanleitung

Samsung

Samsung HT-TWZ415 Bedienungsanleitung

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Bedienungsanleitung

Samsung

Samsung AH68-02166R Bedienungsanleitung

RCA

RCA 600-Watt Bedienungsanleitung