Installation
Instructions
WARNING Use in unapproved appliance may
result in risk of fire or electric shock. This range
hood cord connection kit should be used only
with GE Appliances series range hood models
AV447, JN327, JV338, JV247, JV248, JV347,
JV348, JV367, JV566, JV565, JV535, JV536, JV635,
JV636, JV665, JV666, JVE40 JVX3240, JVX3300,
JVX5300, JVX5360, JVX5305, JVX5365, PVX7300,
PVX7360, RN328, UVC7, UVC9, UVW8 and UVW9.
BEFORE YOU BEGIN
Read these instructions carefully and completely.
• IMPORTANT — Save these instructions
for local inspector’s use.
• IMPORTANT — Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Skill Level – Installation of this power cord kit
requires basic mechanical skills. Proper installation
is the responsibility of the installer. Product failure
due to improper installation in not covered under
the GE Appliances Warranty.
WARNING Improper grounding can result
in a risk of electric shock. The appliance must be
grounded. The plug must be plugged into an outlet
that is properly installed and grounded. Consult a
qualified electrician if the grounding instructions are
not completely understood, or if doubt exists as to
whether the appliance is properly grounded. Do not
use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet
near the appliance.
Range Hood
Power Cord Kit
JXHC1
TOOLS NEEDED
PARTS INCLUDED
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
an electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for
the electric current. This appliance is equipped with
a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is
properly installed and grounded.
READ AND SAVE THESE INSTRUCTIONS
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com.
49-80087-10 09-18 GEA
Flat blade and
Phillips head screwdrivers
1/4" NutdriverWire cutters/
strippers
PART QUANTITY
Power Cord with Strain Relief 1
Wire Nuts 3
Installation Instructions 1
