45153-2
3/26/10
Troubleshooting
- Ensure power to the Recessed Light Extender is
turned “ON”.
- Test your bulb in another fixture to ensure that
the bulb is good.
- Recessed Light Extender’s safety ratchet will begin to
slip when the screw-in torque becomes too high. In this
case the safety ratchet may begin to slip before the
Recessed Light Extender is fully seated into the light
socket, causing the Recessed Light Extender to not
operate. These situations usually develop due to a
corroded or misthreaded recessed light lamp socket.
Please consult a qualified electrician if repair is required
for a recessed light socket.
Made in China / Hecho en China
is a trademark of General Electric Company and is
used under license to Jasco Products Company LLC, 10
E. Memorial Road, Oklahoma City, OK 73114
This Jasco product comes with a 1 year limited warranty.
Visit www.jascoproducts.com for details.
Este producto de Jasco Products tiene una garantía
limitada de 1 año. Visite www.jascoproducts.com
para detalles.
120VAC 75W MAX
RISK OF FIRE OR ELECTRIC SHOCK:
• Turn OFF power before installation, removal
or re-lamping
• Do not exceed electrical ratings
• For indoor use only
• Install this kit only in the luminaires that has the
construction features and dimensions shown in
the photographs and/or drawings
• Do not make or alter any open holes in an
enclosure of wiring or electrical components
during kit installation.
• Do not alter, relocate, or remove wiring,
lampholders, ballast, or any other
electrical component
WARNING
!
