GE Lumination EP24 Series Bedienungsanleitung

WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

•Turn power off before inspection, installation or removal.

•Properly ground electrical enclosure.

RISK OF FIRE

•Follow all NEC and local codes.

•Use only UL or IEC approved wire for input/output

connections. Minimum size 18 AWG (0.82mm2).

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

•Assurez-vous de correctement mettre à la terre le boîtier d’alimentation

électrique.

RISQUES D’INCENDIE

•Respectez tous les codes NEC et codes locaux.

•N’utilisez que des fils approuvés par UL ou IEC pour les entrées/sorties de

connexion. Taille minimum 18 AWG (0.82mm2).

LuminationTM LED Luminaires

Suspended LED Fixture

(Series EP24)

Features

•Long life (50,000 hour rated life)

•5 year warranty

•Dry location rated

BEFORE YOU BEGIN

Read these instructions completely and carefully.

Save These Instructions

Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

Each luminaire is to be used with remote driver kit, model no. EP-DKIT400.

Wiring to be performed by qualified electrician only.

Installation Guide

Single unit installation scenario:

Multiple units in series installation scenario:

Luminaire

Canopy set

1179mm (46.4 in.)

(distance between canopy sets)

1193mm (47 in.) 1207mm (47.5 in.) 1207mm (47.5 in.) 1207mm (47.5 in.) 1193mm (47 in.)

1st luminaire 2nd luminaire 3rd luminaire 4th luminaire 5th luminaire

Distance between canopy sets for left and right luminaires = 1193mm (47 in.)

Distance between canopy sets for luminaires in the middle = 1207mm (47.5 in.)

Example: To install five units in series, the distance between canopy sets for the 1st (left) and 5th (right) luminaire is

1193mm (47 in.), and the distance between canopy sets for the 2nd, 3rd and 4th (middle) luminaires is 1207mm (47.5 in.)

Define Distance Between Canopy Sets

Unit Installation

To adjust height and to level a fixture, squeeze

the tip of the gripper and pull the suspension

cable to the desired height. Clip the cable with

cable cutters to finish the appearance.

Optional: For an improved appearance, electrical

wire can be tie-wrapped to the suspension wire.

Tie wrap

2 Attach crossbar to junction box in ceiling with two

1/4 inch screws. Repeat on other side.

Connect the black (line) and white (neutral) wires

from the luminaire to the matching-colored

wires from the driver enclosure. Connect both

green wires to the grounding screw. Refer to the

EP-DKIT400UV and EP-DKIT400UD LED Driver

Installation Instructions for more information.

Canopy

(electrical)

Strain relief

bushing

Wires from luminaire Suspension cable

Cable coupler

Stud

To driver enclosure

Junction box in ceiling

Crossbar

1 Carefully unpack unit from its packaging. Properly

inspect for defects before installing. Wear work

gloves to prevent dirt and oil from being

transferred to the luminaire.

Fit canopy over stud of crossbar, then screw

cable coupler onto stud.

Squeeze tip to adjust

On the 1st luminaire, disconnect the right-side

suspension wire and “Y” shape suspension wire.

Then on the 2nd luminaire, disassemble the left-

side “Y” shape suspension wire (this one will not

be used).

Join 1st and 2nd luminaires together by fastening

the brackets on the modified “Y” shape

suspension wire from Step 9. Fasten brackets

using four

M8 screws. Screw torque should be between 15.3

±0.8kg f.

Attach a bracket to each end of the “Y” shape

suspension wire using washer, spring washer

and M8 nuts. Screw torque should be between

15.3±0.8kg f.

For multiple units installed in series, all canopy sets will have a power cable except the last canopy.

Optional Mounting Method - Connecting Suspended Fixtures in Series

Reattach suspension wire to “Y” shape suspension

wire. To adjust height and to level a fixture,

squeeze the tip of the gripper and pull the

suspension cable to the desired height. Clip the

cable with cable cutters to finish the appearance.

Squeeze tip to adjust

1st luminaire

Remove “Y” shape wires

“Y” shape

suspension wire

Bracket

Disconnect

suspension wire

2nd luminaire

Canopy set without power cable

Canopy sets with power cable

IND025-191217

www.gecurrent.com

GE and the GE Monogram are trademarks of the General Electric Company and are used under license. Information

provided is subject to change without notice. All values are design or typical values when measured under laboratory

conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained

Specifications

Maximum Driver Remote Mounting Distance

Input Voltage (VAC) 120 – 277V

Input Power (W) 55W

Input Frequency (Hz) 50/60 Hz

Power Factor >0.9

THD < 20%

Control 0-10V & DALI

Ceilings Cable Suspension System

Warranty 5 years

Dimensions 47.5 in. x 11.8 in. x 1.38 in. (1206 mm x 299 mm x 35 mm)

Light Fixture Weight 14.3 lbs. (6.5 kg)

Environmental Operating Temperature Range -10°C to +40°C

Environmental Humidity (non-condensing) 20 to 80% Non-condensing, dry location rated

Environmental Storage Temperature Range -40°C to +60°C

Supply Wire Gauge Wire Length*

18 AWG (0.82 mm2) 59.0 ft. (18 m)

16 AWG (1.31 mm2) 98.4 ft. (30 m)

14 AWG (2.08 mm2) 154.2 ft. (47 m)

12 AWG (3.31 mm2) 249.3 ft. (76 m)

Conforms to the following standards:

* Includes xture’s 6.6 ft. (2.0 m) power cord

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-005 (A) / NMB-005 (A)

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Inhaltsverzeichnis

Andere GE Leuchte Handbücher

GE 50L C9 Bedienungsanleitung

GE 2PK REINDEER Bedienungsanleitung

GE FCB-XM-3D-MK0292-120V Bedienungsanleitung

GE LED 100L C9 Bedienungsanleitung

GE LED 150L 7MM Bedienungsanleitung

GE Criterion Bedienungsanleitung

GE Lumination LHSHX Bedienungsanleitung

GE Evolve E2SA Bedienungsanleitung

GE RGB1-G60-8 Bedienungsanleitung

GE 72612LO Bedienungsanleitung

GE LEDD-5.5MM-150 Bedienungsanleitung

GE Arize Element Series Bedienungsanleitung

GE 10113 Bedienungsanleitung

GE 88820 Bedienungsanleitung

GE 89003 Bedienungsanleitung

GE Color Effects RGB1-G28-36 Bedienungsanleitung

GE FCB-XM-3D-CH0078-120V Bedienungsanleitung

GE LT-FCB-WF-5050-4W-30L-6M-Ex-C-RGB-120V Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung