GE ZISS480DRHSS Bedienungsanleitung

Installation

Instructions

Side by Side Refrigerators

Design Guide

With Installation Instructions

31-49057-1 5

224D1889P01

10-14 GE

monogram,corn

Safety information

BEFOREYOU BEGIN

Read these instructions completely and carefully.

.IMPORTANT- Savetheseinstructionsfor

local inspector's use. Observe all governing codes

and ordinances.

• Note to Installer - Be sure to leave these

instructions with the Consumer.

• Note to Consumer - Keep these instructions with

your Owner's Manual for future reference.

If you received a damaged refrigerator, you should

immediately contact your dealer or builder.

Skill Level - Installation of this refrigerator requires

basic mechanical, carpentry and plumbing skills.

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not

covered under the GE Appliance Warranty.

See the Owner's Manual for warranty information.

A This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and the word "DANGER", "WARNING", or "CAUTION". These

words are defined as:

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

__ Electrical Shock Hazard,

Plug into a grounded 3-prong outlet.

Do not remove the ground prong.

Do not use an adapter.

Immediately replace electric cords that become frayed

or damaged.

Do not use an extension cord with this appliance.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Follow the instructions in the section Grounding the

Refrigerator.

_Tip Over Hazard.

These refrigerators are top heavy, especially with any doors open, and must be secured to prevent tipping

forward which could result in death or serious injury. Read and follow the entire installation instructions for

securing the refrigerator with the anti-tip system.

_J_' Explosion Hazard.

Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in

fire, explosion, or death.

To reduce the risk associated with choking, do not allow children under 3 years of age to have

access to small parts during the installation of this product.

Lifting Hazard

This refrigerator is very heavy. To reduce the risk of person injury during maneuvering and installing this

refrigerator, 3 people are required for proper installation of 36" wide model and 4 people are required for proper

installation of a 42" or 48" wide model.

For Monogram local service in your area, call 1.800.444.1845.

For Monogram service in Canada, call 1.800.561.3344

For Monogram Parts and Accessories, call 1.800.626.2002.

www,monogram,com

Consignes de Securite

ACe symbole represente une alerte de s6curite, Ce symbole vous avise de dangers possibles pouvant causer la mort, des

blessures ou autres, Tousles messages de s6curite seront prec6d6s du symbole d'alerte de s6curite ainsi que des mots <<

DANGER >>,<<AVERTISSEMENT >>ou <<MISE EN GARDE >>,Ces messages sont les suivants :

Signale une situation qui presente un danger imminent et qui, si elle n'est pas evitee, entrainera des bles

sures graves, voire la mort,

Signale une situation qui presente un danger imminent et qui, si elle n'est pas evitee, peut entrainer des

blessures graves, voire la mort,,

_ ignale une situation qui presente un danger imminent et qui, si elle n'est pas evitee, peut entrainer des

blessures mineures ou graves,

Risque de choc electrique.

Branchez I'appareil dans une prise triple avec terre.

Ne retirez pas la broche de terre.

N'utilisez pas d'adaptateur.

Le non-respect de ces instructions peut entrainer des

risques d'incendies, des chocs electriques ou la mort.

Remplacer immediatement tout cordon electrique

effiloche ou endommage.

N'utilisez pas de rallonge avec cet appareil.

Le non-respect de ces instructions peut entrainer des

risques d'incendies, des chocs electriques ou la mort.

Suivez les instructions de la section Mise a la terre du

mfrigerateur,

_/_ Risque de basculement

Ces r6frigerateurs presentent une partie superieure Iourde, en particulier avec une porte ouverte; ils doivent doric

6tre fixes pour prevenir le basculement vers I'avant et le risque concomitant de blessure grave ou fatale. Lisez et

suivez les instructions d'installation completes pour I'installation du systeme anti-basculement

_( Risque d'explosion.

Conservez les materiaux et vapeurs inflammables tels que I'essence a I%cart de votre refrigerateur. Le non-

respect de cette instruction peut entrainer un risque d'incendie, d'explosion ou de deces.

Pour reduire le risque d%touffement pendant I'installation de ce produit, ne pas laisser les

petites pieces a la portee des enfants 896s de moins de 3 arts.

Risque associe a la manutention d'une charge Iourde

Ce refrig6rateur est tres Iourd. Pour reduire le risque de blessure lots de la manutention de ce refrigGrateur, trois

(3) personnes sont necessaires pour proceder a I'installation appropriee du modele 36 pouces, quatre (4) pour

I'installation des modeles 42 ou 48 pouces.

Contents

Safety

Planning Guide

The Installation Space

Dimensions and Clearances

Customization Basics

3/4" Overlay Panel Dimensions - Flush

1/4" Framed Panel Dimensions- Standard

3/4" Overlay Panel Dimensions - Standard

90 ° Door Swing

130 ° Door Swing

Dispenser Trim

Side Panels

Installation Instructions

Tools, Hardware, Materials

Parts Identification

Grounding the Refrigerator

Step 1. Remove Packaging

Step 2. Move Refrigerator into House

Step 3. Install Water Line

2, 3 Step 4. Household Water Filtration 17

Step 5. Install Side Panels 17

Step 6. Install Case Trim 17

5 Step 7. Anti-Tip Procedure 17-18

5 Step 8. Level Refrigerator 18

6 Step 9. Secure Refrigerator to Cabinetry 18

7 Step 10. Adjust Door Swing 19

8 Step 11. Remove Door Trim 19

9 Step 12. Layout Decorative Door Panels 20-21

10 Step 13. Attach Brackets to Panels 21

11 Step 14. Hang Decorative Door Panels 22

12 Step 15. Layout Decorative Hood Panel 23

13 Step 16. Install Hood Panel 23

Step 17. Adjust Decorative Panels 24-25

Step 18 Replace Trim 25

13 Step 19. Connect Water Supply 26

14 Step 20. Connect Power, Close Grille Panel 26

15 Step 21. Start Icemaker 26

16 Step 22. Install Toekick 27

16 Inspect Final Installation 27

Design Guide

THE INSTALLATION SPACE

36" Models 12"

42" Models 18"

48" Models 20"

Electrical_ 1

84 1/2"max II2 a 'o

Finished II ......

Opening Ill ..... 75'_oFrBOc_oF,Oor

2/4" of Electrical

IArea

___ y. 1/2'

*For standard installation, the finished cutout width

must be;

35- 7/2" for 36" models

# 7-7/2" for 42" models

47- 7/2" for 48" models

*For flush mount installation, the finished cutout width

must be;

39" for 36" models

45" for 42" models

57 "for 48" models

Water And Electrical Locations

The opening must be prepared with the electrical

and the cold water supply located as shown,

The Cutout Depth Must Be 24" For Standard Installation

The refrigerator will project forward, slightly beyond

adjacent cabinetry for standard installation,

The Cutout Depth Must Be 26-3/16" For Flush Installation

Wooden cleats are required for flush installation, See Side

Cleats on page 13,

Additional Specifications

. A 115 volt 60Hz,, 15 or 20 amp power supply is

required, An individual properly grounded branch

circuit or circuit breaker is recommended, Install

a properly grounded 3-prong electrical receptacle

recessed into the back wall, Electrical must be located

on the rear wall as shown,

NOTE: GFI (ground fault interrupter)is not recommended,

. The water line can enter the opening through the floor

or back wall, The water line should be 1/4" O,D, copper

tubing or GE SmartConnect TM kit between the cold

water line and water connection location, long enough

to extend to the front of the refrigerator, Installation of

an easily accessible shut-off valve in the water line is

required,

DIMENSIONS AND CLEARANCES

"83-1,

Rea

25-3/8" Framed Models

35", 4!", or 47" 25-3/4" Stainless Steel Models

14CgseWidth-4 .... J......... I Shipping height,

J8o4 Yherefrigeratorcan

be adjusted to fit

into acutout that

,, is 84- 7/2" in height,

mUse leveling legs

Floor and wheels for a

maximum 7"height

adjustment,

42" or 48"

Frame to Frame

Depth Including Handles:

27-3/4" Stainless Steel Models

28-11/16" Professional Models

Product Clearances

These refrigerators are

equipped with a 3-position

door stop, The factory-set

115° door swing can be

adjusted to 90 ° if clearance

to adjacent cabinets or

walls is restricted, Only

standard installation can be

adjusted to 130 °,

730_"Door Swing

775 _"Door Swing

]

,i 7_L:

gO_"Door Swing

2_-7/8"

Behind

F;ame

LJ JI C

Models A B C *Hin. Distance

36" 73" 75" 20- 5/8" to Walt

42" 73" 79" 26-5/8" _4" Stainless and

48" 75" 20" 28-5/8" Trimmed Models,

5" Pro Series

Allow minimum clearances for the freezer door

(Dimension A) and fresh food door (Dimension B) for a

full 130 ° door swing and to allow for pan removal,

For a 90 ° door swing, allow 4" min, clearance to a wall,

for framed and stainless steel models, Allow 5" min,

clearance for professional series models, If the 90° door

stop position is used, pan access is maintained, but pan

removal is restricted,

See the illustrations on pages 6 and 7 to determine door

swing interaction with adjacent cabinets or countertops,

Design Guide

CUSTOMIZATION BASICS:

Professional Style Stainless Steel Refrigerators

Stainless steel wrapped refrigerators have beveled edges and professional-style handles, These models are shipped ready

for installation,

Stainless Steel Wrapped Refrigerators

Stainless Steel wrapped refrigerators have wrapped doors and grille panel, beveled edges, and tubular stainless steel

handles that coordinate with other Monogram appliances, These models are shipped ready for installation,

Trimmed Refrigerators

Trimmed refrigerators are designed to be customized with decorative panels, Field installed custom door and grille panels

are required,

Optional Accessory Kits

ZKHSS2: Monogram Tubular Stainless Steel handles

designed to fit 3/4" overlay panels,

ZKHPSSI: Professional Tubular Stainless Steel handles

designed to fit 3/4" overlay panels, Kit includes one

handle, Order 2 kits for side-by-side refrigerator models

from your Monogram supplier

ZTK36SSH: Trim Kit for 36" Side-by-side refrigerator using

custom panels for standard installation,

ZTK42SSH: Trim kit for 42" Side-by-side refrigerator using

custom panels for standard installation,

ZTK48SSH: Trim kit for 48" Side-by-side refrigerator using

custom panels for standard installation,

CUSTOM HANDLE DESIGN GUIDE

(Flush Installation Only)

For custom handle installation, counterbore holes in rear

of decorative panels may not exceed 1/4" depth to ensure

1/2" material thickness remains for handle support,

NOTE: The counterbore must not exceed 1" in diameter,

1/2"

Minimum distance from handle

side edge to handle center

should be 1-1/4" as shown,

1-1/4"

Design Guide

3/4" OVERLAY PANEL DIMENSIONS

(Flush Installation Only)

For a more custom appearance, overlay panels may be

installed to give a flush appearance with surrounding

cabinets, The overlay panel must be 3/4" thick, Panel

attaches to included brackets to provide mounting to the

appliance door,

NOTE: We recommend that decorative panels have inside

corners and edges rounded or beveled by cabinet maker to

avoid sharp edges on the panels. Edges to be treated should

include the top, bottom and hinge side edges.

IMPORTANT NOTE - DISPENSER MODELS

The refrigerator is supplied with matching adjustable

dispenser trims. The overlay dispenser trim is designed to fit

a total panel thickness of 3/4" plus up to 1/8" adjustability.

. If the panel is less than 3/4" a noticeable gap may be

created around the dispenser trim.

. If the panel is more than 3/4" and fully adjusted away

from door face, the dispenser trim cannot be secured to

the door.

Grille Panel

Dispense_ LCutout

Freezer Fresh

Panel Food

Panel

I-_ D_1 I_E_

Dispenser Cutout

15-]18"

IMPORTANT NOTE: Maximum total weight for the assembled

panels:

, Fresh food door panel- 75 Ibs,

, Freezer door panel- 53 Ibs,

, Grille Panel- 18 Ibs,

36" Side-by-Side 38" 10-5/8" 68-13/16" 16-7/8" 20-7/8"

(in inches)

42" Side-by-Side 44" 10-5/8" 68-13/16" 16-7/8" 26-7/8" q_'i!Ll!t*

(in inches) i

48"Side-by-Side 50" 10-5/8" 68-13/16" 20-7/8" 28-7/8"

(in inches)

1/2" Top/Bottom Hinge Clearance

Router 1/8" Deep

1/2"

Door Trim Pinch Point Hazard

Improperinstallationcanleadto afinger pinch

point hazardbetweenthe sidedoortrim and the

cabinetswhen operatingthe door,especially

with children. Tominimizethis riskyou must

followthe installationinstructionsfor cabinet

dimensions,trimassembly,anddoor stopangle.

Design Guide

1/4" FRAMED PANEL DIMENSIONS

(Standard Installation Only)

If you choose to install framed panels, they must

be cut to the dimensions shown, The panels will slide

into the frame on the door and grille,

Non-Dispenser Models

If the custom panel is less than 1/4" thick and it fits

loosely in the door frame it can be backed up with

a piece of filler material or foam tape to improve

the fit,

Door

"175!!6"

,LTrim

Reveal

..............1/4"

Panel

IMPORTANT NOTE: M_ximum total panel weight;

•Fresh food door panel -75 Ibs,

•Freezer door panel - 53 Ibs,

•Grille Panel - 78 Ibs,

IMPORTANT NOTE - DISPENSER MODELS

The refrigerator is supplied with two dispenser trims,

one for framed panels and one for overlay panels,

, If the panel is less than 0,250" thick, a noticeable gap

may be created around the dispenser trim, Foam

tape may be applied on the door to improve the fit,

, If the panel is more than 0,250" thick, the dispenser

trim cannot be secured to the door,

See Dispenser Trim Fit Example, page 12.

Grille Panel

Dispense_ L

Cutout

Freezer Fresh

Panel Food

Panel

_D -_ _E_

Dispenser Cutout

15-318"

The #amed panel must be 7/4" nominal

thickness to fit the dispenser trim,

Side-by-Side (in inches)

36"Models 33-7/8 9 68-3/8 14-9/16 18-9/16

42"Models 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16

48"Models 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16

Design Guide

3/4" OVERLAY PANEL DIMENSIONS

(Standard Installation Only)

For a more custom appearance, overlay panels may

be installed on trimmed models, The overlay panel must

be secured to a 1/4" thick backer panel which slides

into the trim, A spacer panel 0,10" thick must be placed

between the overlay and backer panel,

Assemble the panels with glue and screws:

, Center the spacer panel on the backer panel, left to

right and top to bottom, Secure the panels with glue,

, Center the spacer and backer panel on the overlay

panel and secure with glue and screws, Screws must

be countersunk into the backer panel,

Door

Backer .

Panel.......................Spacer

OverlaL

£ackerPanel

NOTE: Left-to-right offset is

not cllwc_y,sequcfl to top-to-

bottom ofFset,

,250" + ,70" + ,750" 7,7OO"Tote_/Pnnel Thickness

IMPORTANT NOTE - DISPENSER MODELS

The refrigerator is supplied with two dispenser trims,

one for framed panels and one for overlay panels, The

overlay dispenser trim is designed to fit a total panel

thickness of 1,100",

, If the panel is less than 1,100" a noticeable gap may

be created around the dispenser trim,

, If the panel is more than 1,100" the dispenser trim

cannot be secured to the door,

See Dispenser Trim Fit Example, page 12.

, The overlay panel must be constructed according to

the specifications shown to achieve the correct total

thickness,

, Alternative panel construction methods such as

securing a 3/4" panel to a 1/4" backer panel cannot

be used, Another method, routing a 3/4" thick panel

on all sides, cannot be used, These methods will not

result in the required 1,100" panel thickness,

Grille Panel B

Dispenser

Cutout

Freezer Fresh

Panel Food

Panel

-- m

_D_4 _E_

Dispenser Cutout

I_ 9-5/8" _1

15-3/8"

*Cut the dispenser apening after the backer, spacer and averlay

panels have been assembled,

IMPORTANT NOTE: Maximum tatal weight far the assembled

panels:

, Fresh faad daar panel - 75 Ibs,

, Freezer daar panel - 53 Ibs,

, Grille Panel- 18 Ibs,

36"Side-by-Side(ininches)

1/4" BackerPanel 33-7/8 9 68-3/8 14-9/16 18-9/16

,10"SpacerPanel 33 8-3/8 67 13-1/4 17-1/4

3/4"OverlayPanel 34-1/8 9-1/4 68-5/8 14-13/16 18-13/16

42" Side-by-Side (in inches)

1/4" Backer Panel 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16

,10" Spacer Panel 39 8-5/8 67 13-1/4 23-1/4

3/4" Overlay Panel 40-1/8 9-3/4 68-5/8 14-13/16 24-13/16

48" Side-by-Side (in inches)

1/4" Backer Panel 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16

,10" Spacer Panel 45 8-5/8 67 17-1/4 25-1/4

3/4" Overlay Panel 46-1/8 9-3/4 68-5/8 18-13/16 26-13/16

Design Guide

Refrigerator

Top View

90 ° DOOR SWING

(Standard Installation

Only)

Scale 1:1

IMPORTANT NOTE -

FOR DISPENSER MODELS:

Dispenser models are supplied

with two dispenser trims, one to fit

framed panels and one for overlay

panels, Dispenser trim fit to the

custom panel depends on correct

panel thickness. Framed panels

must be 1/4" nominal, Overlay

panels should be constructed as

shown to accomplish a total 1,100"

thickness, See pages 9 and 10 for

details,

Door

CaseTrim

Frameless Cabinets:

The case trim overlaps

cabinets at the top

and sides, Therefore,

frameless cabinets may

require filler strips to

prevent interference

with cabinet door swing,

The opening must allow

for filler strips,

23-7/8"

FromRearof

Refrigerator

3/4" Overlay

Panel

(NominalSize)

1-1/4"

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GE Kühlschrank Handbücher

GE GFE27GSDSS Handbuch

GE Profile 200D8074P017 Service-Handbuch

GE TBM18JAC WW Bedienungsanleitung

GE TURBOCOOL 23 Sicherheitsleitfaden

GE PFSF2MJY - Profile: 22.2 cu. Ft.... Handbuch

GE GSS23WGTMCC and Sicherheitsleitfaden

GE Appliances 19 Schulungshandbuch

GE WMR04GAV Betriebsanleitung

GE Profile 42 Betriebsanleitung

GE Monogram ZISS360NMSS Bedienungsanleitung

GE ENERGY STAR GTH18HBCBB Handbuch

GE 197D3351P003 Betriebsanleitung

GE Profile CustomStyle PSH23PGT Handbuch

GE PSC25NGSBBB and Sicherheitsleitfaden

GE GTS17JBWBB - 16.6 cu. Ft. Top-Freezer... Montageanleitung

GE PFH28 series Originalbetriebsanleitung

GE Profile PCF25NGW Bedienungsanleitung

GE Monogram ZDOD240 Bedienungsanleitung

GE Monogram ZIR36NM Gebrauchsanweisung

GE Monogram ZIS360N Bedienungsanleitung

GE GSL25IGX Bedienungsanleitung

GE PSE26KSEEESS Sicherheitsleitfaden

GE PFS22SISBSS Bedienungsanleitung

GE Profile CustomStyle PSC25NSTSS Handbuch

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung

Matsui

Matsui MTT50W12E Bedienungsanleitung