Geemarc Wake'n'Shake Bedienungsanleitung

Large display alarm clock with shake

Réveil grand écran avec vibreu

Wecker mit Groß-Anzeige und Vibrationskissen

English P1

Français P11

Deutsch P21

DESCRIPTION

Snooze key / Flash / Dimmer button

larm LED indicato

PM LED indicato

Shaker Lo / Hi switch

larm mode switch

larm+ring / Off / Ring

function

larm and ring

volume

larm tone

Set alarm

Set clock Set hours & minutes

larm off for 24H.

(*)Modular jack (*)Shaker jack

(*)Adaptor jack

(*) Classified TVN-3 according to EN60950 standard.

1- CONNECTING THE TELEPHONE

1 - Connect the PTT line cord.

2 - At your option you may connect your telephone in

the doubler plug.

3 - Connect the PTT doubler plug in the wall socket.

4 - Connect the adaptor line cord.

5 - Connect the adaptor in the wall socket. (**)

(**)Classified “hazardous voltage” according to EN60950 standard.

Electrical connection: The apparatus is designed to operate at DC9V,

650mA. The power adaptor supplied operate from AC100 – 240V,

50/60Hz input.

The apparatus does not incorporate an integral power on/off switch.

To disconnect the power, either switch off supply at the mains

power socket or unplug the DC adaptor. When installing the

apparatus, ensure that the mains power socket is readily accessible.

Telephone connection: Voltages present on the

telecommunication network are classified TNV-3

(Telecommunication Network Voltage) according to the EN60950

standard.

CONNECTION

(**)230V

PTT plug

DC Adapto

Shake

2- SETTING THE TIME ( )

- Press and hold (set clock) button.

- Press H(hour) and M(minute) until correct hour and

minutes appear on the display.

- Release (set clock) button.

- For p.m. hours, the p.m. indicator will appear on the

display near the inscription PM.

12 / 24 hour format

User can select which hour format to use. To select:

- Press and hold the H(hour) button for 6 seconds to

enter the hour selection mode, the display shows

“12H” or “24H”, then release the hour button.

- Press the H(hour) button to toggle between 12 or 24

hours.

Note: If no selection made within 4 seconds, the last

showed format will be chosen, and the clock will return

to normal time mode.

3- SETTING THE ALARM TIME ( )

- Press and hold (set alarm) button.

- Press H(hour) and M(minute) until correct hour and

minutes appear on the display.

- Release (set alarm) button.

- Press , Hand Mto reset the alarm clock to 12.

SETTING

4- SETTING THE ALARM MODE

Put the function switch on A+T position.

Choose which alarm mode you wish to be awakened to

by moving the alarm mode switch to one of the following

selections:

V : only shaker activated

V+S : both sound and shaker alarm activated

V+F : both strobe light and shaker alarm activated

V+F+S: strobe light, sound and shaker alarm activated

Note: if user doesn’t use the V(shaker function), please

unplug the shaker plug from the clock.

When the alarm is set to one of the alarm modes, the

alarm indicator will appear on the display near the

inscription AL.

The table below shows how the alarm modes indicate

an incoming call from the alarm clock.

SETTING

ALARM MODE ACTION ALARM CLOCK INCOMING CALL

SOUND Buzzer With pauses With pauses

SHAKER Vibrates With pauses With pauses

STROBE LIGHT Flashes With pauses With pauses

The default alarm duration time is 30 minutes. User can

adjust the alarm duration time from 1-59 minutes.

To adjust the alarm duration:

- Press and hold the set alarm button for 6

seconds to enter adjust mode. The clock show “30”,

release the set alarm button.

- Press the Mbutton to adjust the alarm duration time to

the desired setting from 1 minute to 59 minutes.

- This new setting will become the new default, until

changed by user.

- If no action is take within 3 seconds, then the clock will

return to normal time mode.

SETTING

5- SNOOZE KEY ( )

When the alarm mode you have chosen is switched on

the alarm time setting, pressing the button will stop

the alarm mode for approximately 9 minutes. The alarm

will then switch the alarm mode o again for a further 9

minutes. This sequence can be carried out for up to 59

minutes after which the alarm mode will be automatically

switched off.

User can adjust the snooze repeat time from 1-30

minutes.

- Press and hold the SNOOZE button for 4 seconds to

enter the snooze time adjust mode. When the clock

show “9” release the Snooze button.

- Press the Mbutton to adjust the snooze time to the

desired setting from 1 minute to 30 minutes.

This new setting will become the new default, until

changed by user. If no action is take within 3 seconds,

then the clock will return to normal time mode.

6- SWITCHING THE ALARM OFF FOR 24H.

(OFF)

Press the alarm off button (OFF), the alarm will then

operate at the same time the next day. The alarm if not

switched off will continue to sound for up to 59 minutes

and then be automatically switched off.

SETTING

7- RINGER On/Off SWITCH ( A+T / OFF / T )

- A+T (alarm + telephone): for the alarm and telephone

ring position.

- OFF: alarm and ring off.

- T(telephone): for the telephone ring position.

8- TELEPHONE OPERATION

- Ensure that the telephone has been set up in

accordance with the telephone userguide and has

been connected as shown in the installation section.

- Select the ringer On/Off switch on the A+T or T

position for the ring.

- Choose which of the alarm modes you wish to alert

you of your incoming telephone calls (see page 4: V,

V+S, V+F, V+S+F).

- When the alarm mode selected indicates there is an

incoming telephone call, lift the telephone handset and

answer the call. When you have finished the call

replace the handset and the alarm will be ready to

indicate the next call.

9- Dimmer Function ( )

There is a 5-level brightness control for the LED display.

In normal time model, press the Snooze button once to

change the display brightness. The brightness will cycle

from bright to dim then from dim to bright (the cycle

repeats)

NOTE : The dimmer function will not work when the

clock is in snooze mode.

SETTING

10- VOLUME ( VOLUME )

Sets the volume of the ring and the alarm sound.

11- TONE ( TONE )

Sets the tone of the alarm sound.

12- SHAKER SWITCH ( + _)

Sets the motion of the shaker to Lo (-) or Hi (+).

13- BATTERY BACK- UP

It’s not necessary to insert a battery for the clock to

function. With battery back-up installed, the clock will

keep the time and alarm settings in the event of a power

cut or the DC adaptor being unplugged.

Check the battery condition after one year, replacing old

battery. A leaking battery can destroy your clock.

SETTING

GUARANTEE

From the moment your Geemarc product is purchased,

Geemarc guarantee it for the period of one year.

During this time, all repairs or replacements (at our

option) are free of charge.Should you experience a

problem then contact our helpline or visit our website at

www.geemarc.com. The guarantee does not cover

accidents, negligence or breakages to any parts. The

product must not be tampered with or taken apart by

anyone who is not an authorised Geemarc

representative.The Geemarc guarantee in no way

limits your legal rights.

IMPORTANT: YOUR RECEIPT IS PART OF YOUR

GUARANTEE AND MUST BE RETAINED AND

PRODUCED IN THE EVENT OF A WARRANTY CLAIM.

Please note: The guarantee applies to the United

Kingdom only.

Declaration: Hereby Geemarc Telecom SA declares

that this product is in compliance with the essential

requirements and other relevant provisions of the Radio

and Telecommunications Terminal Equipment Directive

1999/5/EEC and in particular article 3 section 1a, 1b and

section 2.

The declaration of conformity may be consulted

at www.geemarc.com

Caution: Radio frequency interference may cause

discernible sound on the unit. The sound will end when

the interference stops.

GUARANTEE

Andere Handbücher für Wake'n'Shake

Inhaltsverzeichnis

Sprachen:

Andere Geemarc Wecker Handbücher

Geemarc

Geemarc TravelClock Bedienungsanleitung

Geemarc

Geemarc Wake and Shake Bedienungsanleitung

Geemarc

Geemarc Wake'n'Shake Bedienungsanleitung

Geemarc

Geemarc Viso 50 Bedienungsanleitung

Geemarc

Geemarc Large Display Alarm Clock Bedienungsanleitung

Geemarc

Geemarc Wake 'n' Shake Star Bedienungsanleitung

Geemarc

Geemarc Wake 'n' Shake Spot Bedienungsanleitung

Geemarc

Geemarc Wake 'n' Shake Voyager V2 Bedienungsanleitung

Geemarc

Geemarc Wake 'n' Shake Voyager Bedienungsanleitung

Geemarc

Geemarc VISO10 – MSF Bedienungsanleitung

Geemarc

Geemarc Wake 'n' Shake Vintage Bedienungsanleitung

Geemarc

Geemarc Viso5 Bedienungsanleitung

Geemarc

Geemarc Viso 20 Bedienungsanleitung

Beliebte Wecker Handbücher anderer Marken

Steren

Steren CLK-210 Bedienungsanleitung

COP-USA

COP-USA ALCDVR32-SL Bedienungsanleitung

Philips

Philips HF3505/70 Technisches Handbuch

Casio

Casio PQ-70 Bedienungsanleitung

iHome

iHome IA63 Bedienungsanleitung

Coopers

Coopers 9765 Bedienungsanleitung

ANJANK

ANJANK AC-190 Leitfaden

TFA

TFA 98.1075 Bedienungsanleitung

Sharper Image

Sharper Image 204050 Bedienungsanleitung

Lumie

Lumie Zest Bedienungsanleitung

Dexford

Dexford RCT200 Bedienungsanleitung

Philips

Philips AJL303/37B Bedienungsanleitung

RST

RST Q754 Bedienungsanleitung

iHome

iHome iKT50 Bedienungsanleitung

Sony

Sony dash HID-B7 Bedienungsanleitung

SVINZ

SVINZ SCC009 Bedienungsanleitung

Clas Ohlson

Clas Ohlson 918863 Bedienungsanleitung

IKEA

IKEA FNURRA Bedienungsanleitung